VISE - CHEAPEST vs. Most EXPENSIVE On AMAZON
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2019
- Many of our videos are comedic & satirical & not intended to cultivate antisocial or unlawful behavior. Thank you for supporting our Channel through the below affiliate links. No price increase for you but we may receive compensation.
-Amazon - our store - wranglermart.com
-Jk Boots - www.jkboots.com/wranglerstar
-Radios Made Easy - radiomadeeasy.com/product/wra...
-Amsoil - www.amsoil.com/c/products/1/?...
-GoDark Bags - godarkbags.com/#cody411
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com/r.cfm?b=228804...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystems.com/wranglerstar
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar
SUBSCRIBE: bit.ly/2btWfQR and turn on notifications to get them
#Proho #wranglerstar - บันเทิง
GREAT DEAL ALERT ----- YOST 455 BENCH VISE Here amzn.to/2HY8PHq
Why is your SnapOn not fully bolted to the table? It's missing one bolt.
You are a good guy I don’t care what they say about you lol
As a matter of interest, I took a look at the the link....... vise - $77.11, postage - $90.50..... lmao!!
I think I'll stick with my "vices" lmao!!
All I use atm are lock jaws or get the wife to hold stuff, lmao!!
Cheers mate,
🇦🇺 🍺🍺
Evolution Glitch and that’s US$, 😂
This converts to $101 and $131 respectively in Aus $$.
😂😂😂😂
This is definitely Cody's song 😂. th-cam.com/video/XjgjSKv4a04/w-d-xo.html
Love the cheap vs expensive content! Do more!
Same here. I have a tendency to want to buy the very best, when in actuality I don't really need it, and end up wasting a ton of money on something that will rarely be used.
i wanted to see the yost tested to failure... but thats what fireball tool's video is for
Yeah the contrasts are pretty awesome. You can see the value in both products since they both work for different needs. I just honestly don't see much value in the really cheap tools even if they're a lot less cost, because the value isn't there. If it breaks after not much use, then they are kind of worthless imho.
I respect he isn't doing product placement so there's no 'bought' reviews. Just like any of us using them.
@@Knight_Kin agreed. You get what you pay for. If this YOST lasts 5 years on average (replacing every five years) it’s a pretty good deal-you’d get 55 years of use for the same money as the SnapOn. If you had to replace every 2 years, not so much.
Your videos are a godsend for people like me who didn't have an active father figure in my life when I was growing up. Being able to watch your content and learn the fundamentals of different skills and different tools has truly been a blessing. Keep it up, you're a real genuine wholesome and helpful individual.
I second that. My dad was always on deployment. Never was taught much about working with my hands. I'm having to put myself through industrial maintenance school and self-teaching through channels like this. These videos are a great help.
For me too. Pops was always working and that commute was forever long. He did not use or have most of this equipment, so seeing it in action and being assembled really helps as I piece a shop together.
I started watching this video after work tonight and ended up watching you build one of the most beautiful work benches ever. Great job. Gave me some great ideas and inspiration for a new bench. Keep it up W. God bless you and your family.
You've taught me quite a bit through this channel of yours. I appreciate the time you put into making these videos and the effort required to dispense some of your knowledge. Thanks.
Snap on is just a Wilton you can buy directly from Wilton much cheaper
YES! thank goodness someone besides me knew this. I collect Wilton's so seeing a snap on branded wilton bullet vise is almost sickening.
Does it have Wilton stamped on the other side? I couldn't tell.
@@Teabagz4fun no it does not but search "wilton bullet vise" on google. Exact same means of retaining the leadscrew and overall shape. Snap on always uses William's for their wrenches. If you love tools you can buy " snap on quality" for way less usually. I bet you if wranglerstar was to read this, if he pulled the movable jaw assembly out and looked at the square key on the bottom that it WILL have a date code, meaning it is in fact a Wilton bullet vise made for snap on.
Yeah but you don't have to track down a truck when you break it. What's the fun in that?
@@edfleming9600 exactly, paying more for that 25 cent snap on plate and then tracking down a truck and paying three times the parts cost than what wilton wants 😂😂 that's my ideal of fun
Vices, gripping content! 😄 Thank you, Thank you, Im here all week.
Great comparison. I can't imagine spending $800 for a vice. I've had my vice for 30 years which isn't even as nice as your new Yost and I've never once thought that I needed a better one. Enjoyed the video. Keep them coming.
Restoring an good old vise is a cheap option as well and it makes very good practice. I am a beginning maker at 18 years old and restored 5 vises by now. It's nice to find an old Heuer vise or blacksmiths vise and to restore it. Besides that it's a real joy to see an rusty vise turn into a like-new one. I recommend an angle grinder with a wire wheel, this will do a lot of work for you.
I also think it's good that old tools get a new life instead of buying new things all the time. Old tools which are not broken or something like that are also made of a much higher quality that new, cheap tools these days. So for the long run restoring an old tool might be the best option
Goody, goody, gumdrops!!!
Alewijn, I started like you and I now have a shop full of tools and machinery that were once going to be thrown away or scrapped by someone else. I couldn't afford to have bought all of that stuff new. What I didn't need for myself, I sold or traded to others. You are definitely on the right track to building your own tool empire.
When you chat with yourself
Are you European?
Heuer , Hillus,FZA,Ariex and others are very common here in Italy
I did as you at 18 years old I restored my first vises
@@daniele3275 I'm Dutch, so yea the neighboor of the 'made in germany' stuff. For my gold/silversmith coarse/study I mostly use Ferman, Swiss, Czech or Italian tools which is all of the good stuff as well.
I got one of the low end American made 6" Yost vises and I love it... been using it for 4 years and I expect to give it to my grandkids
I love how Snap-on put their logo and markup all over that Wilton vise.
I have that exact Yost vice. Perfect for my needs! I actually have two, one on my workbench and one on my gun-smithing table.
Keep fighting the good fight, Wranglerstar! Unbiased reviews with honest commentary are a rare breed, and you have a lot of experience to share to boot.
You are going a great job giving us honest opinions about items to better our lives with. I appreciate integrity in your videos. Keep up great work. Thanks, John
I'm getting the blue one. Thanks for the research. I need one. Building a new work bench to.
Been watching your videos for a few years and absolutely love them. Great and to the point reviews. Best tool reviews on TH-cam.
For a young apprentice $ 800 + for one tool is lots of $ to start making money.
Alternative brands works for them until the gravy train comes.
I love my Yost 906. I bought it a few years ago at the recommendation from my grandfather as he said to always get a cast steel vise if I really wanted to use it a lot. It cost a little more at $100, but it is worth every penny.
My favorite woodworker, machinist, historian, homesteader, and all around genuinely good human being on TH-cam! God Bless
I remember your old snap-on vice vid. It took about a year to find one but got it for 60 bucks.
Seems like a small nice little unit! I have a small 5 inch Wilton vice that mainly used to hold my chainsaw bar when Im sharpening so I wouldn't need anything super beefy. I do like how it rotates 360. Mine only rotates so many degrees each direction and the 360 is nice for sure! Thanks for a great video as always
How many people want to see a Snap On vise restoration video??
I'd love to see that Snap On look new, then compare it to the Yost.
That vice is still fully functional. What would you restore? The paint?
All true and good comments, the OCD in me would like to see the item cleaned up but the realist in me says, no he's already taking the time to do all this and take care of life responsibilities so he's already doing a lot and how do I know he didn't already wipe it down before doing the video?...
Would be nice if he cleaned it up a little, got rid of the surface rust. But then somebody is more likely to steal it. Trade-offs.
There's lots of Wilton bullet vise rebuild vids on youtube.
I have the Yost 455! I chose it off of Amazon last year for my home shop. It is perfect for my needs. I was so pumped to see you chose the same one Cody!
Just finished restoring a wilton 3.5 " machinist vise. Love it.
Very honest and wise approach to this evaluation. By contrast I have just watched another video posted on TH-cam where a guy destroyed by sledge hammering and over tightening using like a 5 foot pipe more than a dozen good vises just to see when they would break!
ohhh man you have hit the nail on the head with "me specific" content these last few videos. I have been planning to build a new bench and buy a vice for quite a few weeks now
I bought the YOST M7WW nearly two years ago. It has been FANTASTIC.
This vise seams like a great value, thanks for the insight!
Love this and ALL your budget vs heritage tools. Can't wait for the next and the next and the next. Thank YOU for all you do and your weath of knowledge and unbiased opinion.
Love the top of the line vs bottom comparisons :)
Honest reviews are the best reviews! Been loving this series
Man I’m loving this series !
I have a Yost 750-e and it has served me well for years and it's just a bit more on Amazon at 99$ and has a bit more functionality then the 455.
I personally would get the Yost 855 or even the ADI-4 as both of those are stronger and also have a lifetime warranty, as opposed to the 750e 1 yr warranty. The steel is 400% stronger on the Yost ADI-4, and 200% stronger on the Yost 855. If you need a big vise, the 855 is the best deal @ $135, but if you can get by with the ADI-4 (4"), its so strong it will last multiple generations for $109.
I have that same vise but I have the 6 1/2 in, my wife paid like 60 something last December for a Christmas gift, I absolutely love it!
Thank you soooo much!!! this is just what I wanted! I am working on my garage counter top work bench right now!!!!! THANK YOU!!!!!
These comparison videos are my favorite!
hey does snap-on still sell the ratchet extension with handle wanted to buy my dad one but couldnt find it
I mounted the mechanic's vice on a T made of 2x4's and had a wood working vice mounted on the
bench. This lets us use the mechanic's vice when we need it and have a clean bench when
we take it off
Even if you did want to do Product placements, i would still highly enjoy your content. Ive been watching for the last 4 years and i gotta say, this is the first place i come to if i'm on the fence about any tool. I also really enjoy the Cheapest vs Expensive. it gives us a chance to try before we buy and honestly thats great. If anyone who comes to your channel only to cry and moan about product placements are just clueless and have no idea how the world works. i think it would be great to see you make money while giving a honest review because i know you will keep the integrity and commitment to us and you always will.
I recently found a Columbia Red Arrow. Mounted up just like you use in the woodshop to chuck up in my Irwin bench vise
Awesome video. I am shopping for a vise. This was super helpful. Thanks!
I don’t have or really use a vise and even I’ve heard the Yost brand. Nice selection. This series has been excellent. I’m going through past videos, looking for recommendations for an air compressor for occasional use but good enough for tires and eventually air tools.
Hey do you have any videos on Manual wood splitting ? I’ve been driving around picking up wood that tree cutters are leaving on the curb, I have some nice size pieces, trying to see what is the best, cheap way of splitting them up. Thanks
I got spoiled working at the Hanford Nuclear Res for 31 years. We used the Wilton 400S or 600S vice. When I retired I bought a 400S for my shop bench, no regrets.
Fair play to you for not chasing the sponsorship/endorsement/patreon dollar. Just good quality, informative videos. Keep up the good work
That does look like a great deal. I have a 7" vice I paid like $120 for. oddly it looks basically like the Yost one. I'd say the Yost will get the job done for most any DIYer. nice find!
I've had experiences with different yours of vises. My first two were from harbor freight. The first was a big one with vertical and horizontal swivel capacity and pipe Jaws. It was a good vise but the lock screw to keep the jaws from rotating stripped out after one year. Stupid as I was I put it on the curb I should've taken it back they'd have given me a new one. Anyway the other one was a 6 inch woodworking vice it's worked like a charm since I got it. My other vises we're found on FB marketplace or acquired for free. The free one is a real classic. It's a huge Morgan Chicago. Probably 100 years old and we'll maintained by it's owners. It was left on a bench in the basement of the home my friends recently bought. It's not a Wilton but for sure my sons and their sons will use it.
great video, Cody, I will most likely build this table, a variation of it, or use your suggestions on outfitting it. But I will say I do see ads for loctite when a bottle floats across the screen.
Added some sheet felt from McMaster-Carr - fantastic for using my vise to clamp tender items such as gun stocks or barrels. All the holding power you’ll ever need.
Just found your channel. Love it. Really enjoy your way of discussing things and thinking long term for the future of craftsmen and craftswomen also of course.
I just inherited a Starret 924 from my dad. It lived in a machine shop in Lockheed in Marietta Ga since the 50s. Currently giving it a good overhaul now.
been watching you channel thank you for charing, thank you for your integrity, I will make sure to hit the thumb up like on every new video! Thank you!
I've had a fairly inexpensive 5" Wel-Bilt vice from Northern Tool for the past 20+ years. I knew going in that at some point it was going to break and I'd be shopping for a new one. The other day I greased and oiled it, and it's still working like a champ.
From an Ex Snap-On dealer, you’re buying a Wilton. With that being said, the usual case is if Snap-On doesn’t make the best, they rebrand the best. So if you can find a used Snap-On vise for a relatively good deal, buy it!
Thank you for your series of what to put on your bench. I've been looking for a decent vice for an occasional use on my bench. I already have a drill press set up and looking at both a jointer & plainer and finally a bandsaw to complete it. Not a professional, but I like to tinker on the weekends and evenings. I just ordered it through Amazon - $84.25 + tax
I love my Yost vises. I have an 8" on my garage bench and a 4.5" on my gun bench.
Nice touch on the end of the video God bless you and your family.
Just bought a yost 750e... glad to see you appreciate the brand.
Cody do you know the part number on your snap on / Wilton vise jaws.? I have your same vise and tried to find replacement jaws and cannot the ones I bought the holes don’t line up I called snap on and Wilton and and went no where saying was to old? I think I Remember you put new ones on yours years back, any help would be appreciated . I used my die grinder and reground the waffle pattern but the jaws are not square from years of use prior to me being the caretaker . Love the vice and my quick fix is working but frustrating when I can’t properly get a purchase on things sometimes. Any help would be greatly appreciated thank you 🙏🏻!!
I would not accuse you of product placement, I like how honest you are. Also you were the inspection well one of the inspections to my other channel that I probably should have used to make this comment. Oh well.
Great video. wranglerstar do you have and run any older chainsaws or just new saws
We got a 5" Capri ductile iron vise for the shop; super versatile as the head rotates 360° (not just the base)
"For what I do" Key phrase. I appreciate your candor . Because "for what I do" that 455 may last a week.
Fireball Tool just did a good vise test with several different brands.
I have a small 4-foot workbench. Do you feel the Yost 445 which is essentially the same thing in this video except it's 4 and 1/2 in to be suitable? I think I'm going to need a smaller footprint otherwise I will have no room to work. If you could let me know I would appreciate it
Thanks for the comparison!
Love the Record no5 I have. Christmas gift from my father back in 1992. Have replaced 100 u joints give or take a few bent metal 3/8 by 2 in to 90 degrees by smashing it with a 5 lb hammer. This thing is an anvil with jaws.
I'm currently using an old Craftsman vice from 1957. Still in good working condition. I wonder if Tekton vises are any good, since all Tekton tools have a great warranty.
I have 3 vises, a Wilton that looks just like yours, an old Yost that's probably getting close to a hundred years old and a really old Chas. Parker that weighs about 200 lbs. All 3 are great vises but my go to always seems to be the Chas. Parker. It's massive and indestructible, opens about 10 inches yet operates smoothly and precise, for the monster that it is. Great video, though. I always look at garage sales and auctions for things like that. There are some great deals to be had, if you look hard enough!
Those old Wilton/Snap-on vises are still made, but like you said, 10 times the cost. Very Good video, as someone who has bought and sold, probably thousands, of vises over 30 years I can say you did an excellent job of real facts and presentation. Excellent Job sir.
Hey Cody, can you tell us about your main steel work bench behind you in this video? It looks like warehouse racking. What did you use for the top and how is it attached? If you've talked about that in a previous video, can you point me toward it? Thanks!
Where I work they have a load of wilton vises from the 70s and they all work great still.
I have a Harbor Freight
5" swivel with both straight and pipe jaws. Love it. Choose what you buy from HF carefully. $70
I feel lucky, I picked up a 5.5" IRWIN swivel vise for $5 canadian at an estate sale.
Guessing a lot of that cost is cast iron VS forged steel?
Another great video! Thanks brother. You are a wealth of knowledge. Please continue these type video's. And as always, keep walking with our KING!
If you want to save a few hundred dollars on the “snap-on” vice you can get the Wilton. Same vice that Wilton rebrands for snap-on.
I broke my Wilton a couple months ago. It wasn’t that hard. I had bought that one in the mid 1990’s. I got an Irwin from Lowe’s (also has a tag that says- Rocord since 1909 on it). So far so good and it does get used a lot.
I am almost ashamed to say that my workbench has the smallest vice Hazard Fraught sells, except that I haven't needed anything bigger just yet.
Thanks this video was just in time I am looking for a vise if you happen to see this comment I was wondering if you had any input on something in between those two maybe at the $200-250level thanks for all your help and knowledge
The vs stuff is cool please keep doing it
If I was using a bench vise to put victuals on the table, I'd get that Snap-on. Great video.
We have a really nice old vice that my grandpa bought about 50 years ago or so which is really nice
You guys should check out the Fireball tool fixture table vise. 120 bucks and he tests it to 10000 lbs of force before it broke. It’s very impressive for the money. It’s forged to not cast iron.
Any history and opinions on rebuilding chainsaws? Just got a free Stihl pro series 044 and I'm rebuild the engine with all OEM Stihl parts and I'm looking forward to getting it running and cutting and I was wondering if you ever had experience with this side of running saws
Does anyone know if they both cast or is the snap on one forged?
I just got the Yost ADI 4in vise off of Amazon for $115 or so. It's made of austempered ductile iron which is MUCH stronger than cast iron, cast steel, and even forged iron. The jaws open wide and have a lot of clamping force. Plus the pipe jaws and all internal part are also replaceable.
The Fireball Tool channel tested a bunch of vises to destruction, including the 5in version of my vise a few days ago. It held up extremely well, beating most of the other more expensive vises. The only failure point (after absurd abuse) was a soft iron strap that holds the vise body to the swivel base, (the vise in this video has the same swivel system) but after looking at it myself, that part would be extremely easy to upgrade by replacing with, or welding on, a small slab of 3/8 mild steel.
They tested impact resistance, clamping force, and maximum durability by tightening the vise to failure. The adi placed in the top 3 in all categories out of 10 or 12 vises I think. And the first place was a home made behemoth made out of half inch plate and square tube.
Great video, I highly recommend it.
Kur Norock thanks man, I’m gonna buy one now
Great demonstration send comparison wranglerstar
Found myself a "Matador 100" vice for 8,50€ (10 dollars) few weeks ago, didn't even realize how good it was before I took a closer look. Will serve me well at my small shed.
I have a machinist friend who built his own Vice and it weighs 44 pounds I am not kidding
I'm sure that thing will last forever
Dumb imo. For that time you could just buy a hydraulic cnc vice. Or just normal cnc vice.
is a 4.5 inch vise fine to use, its 55 on amazon.
You say that the jaw inserts are replaceable, but are they reversible? Knurled on one side and smooth on the other?
Just a tip for anyone looking for a good vise or good cheap tools, go to an auction or estate sale, they don’t care about that kind of stuff and I managed to buy an old but heavy and functional vise for around $35. I’ve bought snap on wrench sets for $10-$25, yes the WHOLE SET.
Thank You
Enjoyed the video
Be Safe!
Have been a subscriber for quite awhile and I just wanted to say thank you. I feel you go over the products in such a manner that we can make a education choice. I value your opinion and always look forward to more video uploads. Side not, would live some more manly manners!
Are there any other pro-grade vice brands that you would recommend that are made in the USA as an alternative to Snap-On and Yost (I believe you said early on that they had a pro line)?
i have been looking for a cheap good vise that works well, thanks!
I remember Cody honestly reviewing a few new products he was sent to try...well they did ask for his honest opinion 😂😉 some were good, some were bad......and a few were very ugly. Nice review and an interesting point on the swivel mechanism 👍
Thanks for the advice. I'm curious why you chose the 455 over the 855.
The Yost 855 also has a lifetime warranty (his here only has 1 yr), and the cast is TWICE as strong as the one here. Also the 855 is ductile iron, which can flex a little rather than break like the cast iron his 455 is made out of. If you look on Amazon at the reviews, there are many people who have broke the 455 series he has here. The 855 is made of better steel that won't crack.
I bought a vice at Harbor Freight for like 50 bucks and it's pretty good Vice works good. 👍
Thank-you and best!
Granpa John in England