Wilton Vise Restoration | Wrinkle Powdercoat???
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- In this video I restore a 3 inch Wilton bullet 930 machinist vise made in 1946. The original bullet was designed in 1941. They range from sizes of 2 inches up to 8 inches.
I start with disassembly and use electrolysis to remove most of the rust, after electrolysis I move on to sandblasting all the large parts.
Once all the parts were cleaned up I turned my attention to the defects. I welded up the dents and missing letters. Cast iron is difficult to weld. After welding I had to file and sand down the parts.
I wanted to use a durable finish since this vise will get used. I chose a wrinkle black powder coat and I think it turned out great! The small parts were polished and then nickel plated for protection.
I hope you guys enjoyed the video, if you do leave a like and a comment. Subscribe if you would like to see more awesome content ;).
Much Love,
Dr Restoration
If you would like to support my channel check out my merch and Patreon: / @drrestoration
Patreon: patreon.com/DrRestoration
Facebook: / drrestorations
Instagram: / dr_restoration
Tiktok: www.tiktok.com...
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
I hope you guys enjoyed this video! Leave a like, comment and subscribe to support my work! 👍😀💙
Who knew that a vise could be beautiful? This one belongs in a museum!
Yeah, like the Smithsonian Museum or something. 😂
This has been my favorite restorations.
Thanks
This came out better than factory finish !!
I have my father's Wilton bench vise. It's from the early 50s. Your restoration is awesome.
That’s awesome Katie!
Can I send you my vise?
That came out better than new. And it's nice to see someone putting the right amount of grease in it.
What a nice beautiful vise!!! well done!
Thank you very much!
We all have our vices, but yours is sight to behold.
That vise will never be used again! Not for a long time, anyway. What a beauty.
This is the art of perfection Dr
Thanks Wade 😁
That now is a work of art and even if it’s never used for it’s purpose it’ll look good on a shelf as an ornament
Thanks for sharing
Love and Peace from Ireland
Thanks Sid! I’m afraid to use it now 😂
Outstanding! I would use it to remember that part of the era where men worked hard for the things they had.
Very nice restoration! You are close on the date but old Wiltons had a 5-year warranty and they would stamp the date on the key of when the warranty expired so that would mean yours was made in 1941.
I might be a bit biased being a Chicago native but Bullet vices are just 🤌🤌
That subtle wrinkle paint turned out sooo clean. Never would've thought to do it like that myself!
Thank you friend 😊
Great job...better than factory finish!
@@johanschoeman869 thanks!
Very nice work Dock... Ready for another decade or two.. I don't think I've ever seen anyone powder coat a vise before, came out beautiful... I especially like the wrinkle finish.. Take care my friend...
OME!!!! You actually did the dab method on the raised letters. Drives me crazy that every one else does paint brushe
beautiful restoration. And I appreciate the details like adding the missing letters!!!
I know these channels are about what *can* be done and not necessarily about what *should* be done, but I would have wirebrushed the bare metal parts and given it some grease - done. Maybe smooth jaws.
I’m happy about the successful screw extraction, that was good news.
I'm just glad none of the parts were buffed to a high bright finish like other channels do. The cast imperfections make this vise the only one exactly like it. I would have left them.
Whatever keeps us moving and grooving, keep on turning those wrenches! 😊
To be fair, black is a good, natural choice for the colour and deserves an extra point. Unfortunately we need to take 100 points away for tracing the letters 😭🙂
@@mm9773 😂
Great video! The restoration of the vise is impressive and satisfying to watch. You did an excellent job of bringing the old and rusty vise back to life. The attention to detail and the careful approach you took during the restoration process is admirable. It's amazing to see how a little bit of cleaning, sanding, and painting can transform an old tool into a functional and beautiful piece again. Thank you for sharing this restoration project with us, it was both educational and entertaining. Keep up the great work!
Thank you for the kind words! 🙂
Awesome restoration. Very happy to see the welding of damage instead of bondo. I'm pretty sure Wilton did not have a stocking order for Bondo back then.... Good to see a total lack of short cuts!!
I'm not a big fan of black on certain items. But that looks pretty sharp! Never heard of that color.
Wrinkle black powder coat is pretty popular among the hobbiest automotive crowd. When done right it can really dress up an engine, suspension components, interior pieces, etc. A good friend of mine used it on his Oldsmobile 455 that was going into his 1971 Cutlass. The block and heads were painted olds gold and he ordered some chrome finned valve covers and an aluminum intake. He did the wrinkle black finish on all of the valve covers except the tops of the fins and he did the whole intake too except the logos and lettering. Looked very very nice and I'm usually not a fan of black on engine parts.
Отличная реставрация!
Привет из Беларуси! 🇧🇾
Thank you, greetings!
Excellent work. Loved the restoration.
I never tire of watching your videos.
That means a lot, thank you!
All I can say is beautiful
Thanks Benny!
Spectacular rejuvenation!
Extremely well done that man.
That's such a beautiful restoration that it's much too nice to use now! 😁
I think so too!
Nice shots and nice edits and in the beginning at disassembly I think i noticed a tool from rustland revision???
Yes sir! Chris at Rustland Revision is awesome!
Excellent job. Wrinkle finish is top.👍
Thank you MFT!
*_That turned out absolutely gorgeous, dude! A fantastic piece to use for years to come! Please keep up this excellent work and videography! You are doing a fantastic job! 🍻🤘💜_*
Thanks a lot my friend!
Wow, so interesting watching the restoration, I love the black wrinkle finish. Way too nice to use now, you are a master craftsman.
Thank you 🙏 I am now afraid to use it 😂
love the black wrinkle finish
Excelente trabajo. Quedo espectacular. Felicitaciones. Saludos de Uruguay.
You made it clear restoration
Perfect one. really that was fantastic restoration
Thank you 🙂
The painting is awesome 👏🏻
It's a perfect restoration.👍👍
Very nice. I enjoyed the restoration.
Thank you Frank!
Very clever electrolysis system
Incredible outcome!
Thanks bro! 🙂
I love how you filled in the couple of hammer blows with weld. I thought don't, because it adds character, but im glad you did. Now you can put your own mark on it! I'm glad you came up on my feed, and i had to subscribe.
This is the most incredible restoration I’ve seen. Better than new. Bravo.
Thank you!
Incredible job. Just beautiful.
Thanks a lot Marc
Very nicely done. I never saw crinkle-finish powder coat before.
Thanks, I was surprised how nice the wrinkle coat came out!
My Mechanics, Cool Again Restorations and this guy are all the same guy. I am sure of it!
That’s very next level
Thanks Big Pete!
REAl SICK VISE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
BETTER THAN NEW!!!
You've got me wanting to try powder coating now, absolutely beautiful. Thanks
You should! Thank you
Really nice work
Thank you! Cheers!
Nice restoration. You are doing well 👍👍
Thanks 👍
Great restoration, ya got a new vice.
Absolute pleasure watching your videos!
Too nice to use !!
Really good mate - well done 👌
Thank you :)
Great work dude 👍👍
Thanks bro!
This comment is just to support this channel
Awesome restoration
Thank you!
Beautiful restoration
Nice restoration!
omg such a wonderful job thank you for this vlog. your fan from Ontario, Canada
Greeting from Florida 👋
looking at the seams and imperfections on the vice, quality control wasn't a priority. Great job in not only restoring, but improving on it when new!
Hey thanks Phil!
Those seams and imperfections are a byproduct of the sand casting process. They in no way would have impacted the usefulness of the vise. What would have been of concern are voids that reduce the structural integrity of the parts. While the outcome of this refresh is visually pleasing nothing was done to actually restore the vise.
Thanks @@joedowling5452
Always the best. It would be great if you could make videos with the subtitle function and auto-translation function turned on so that Japanese can understand them. Please consider it.
I gotta get one of those! Nice job on the restoration. Looks great!
Thanks 🙂
absolutely awesome I really liked the color of paint. excellent outcome.😉
Thank you!
I want this! Awesome restoration
Damn fine work sir!!!
Thanks!
Nice job looks better than the one i got lol
Un trabajo de restauración completamente impresionante!!!!!!😍😍😍😍
😁
What a beautiful restoration!! 👍
Perfection
Thank you Chris! 🙂
Oh . . . so that's how to paint letters on metal, not bad!
Yes it’s sooooo much easier than a brush
So nice it should be in the kitchen!!!!
Maybe that’s where I’ll put it 😂
Man!! You do nice work. Enjoyed this one. I subbed you.
Great job. Awesome outcome.
Nice job
Great job!!
Was about to be upset you didn't paint the letters but then you came through in the end
Put some SAE flat washers under the acorn nuts and they won’t tear the paint every time you move them.
Very nice job ❤✌️💪
Thank you 💙
Wow! Beautiful job!
Thank you 🙂
Great job my friend
Thank you! 🙂
Very nice indeed!
what a visual feast
And the Doc is hungry for more!
That is the most awesome restoration I have ever seen. Well done, great tips, perfect!
If I may ask, what would something like this sell for?
Probably 3-500 but not for sale
I enjoyed that 👍🏻
Glad you enjoyed it 🙂
Very good
Good job 👌
well done, thnxs
Thank you!
Lovely job!
Thank you! Cheers!
Uhhh wow that was great! SUBSCRIBED!
Amazing job!
Very good 👍👍
God job bossd👍👍👍👍👍👍👍
ادامه بده.از این کانال هم خوشم اومد مثل شما.psycho engineer
1:10 I wouldn't find this pin... 😅
Fantastic work man.
Well done!
Thanks Brotha!
Superb...👏👏👏
Thanks 🤗
Damn! Wow. Oh yeah. 👌
Thanks man!