I had the same problem with my 2007 GMC Yukon. I followed you directions and got the hatch open, after that the motor works from the overhead counsol. Thanks for the video. Yours was the best. I had one problem, I attached a string so I could open it manually if the latch didn’t work. Somehow I didn’t have a good exit , therefore it doesn’t work manually. My bad. Once again great video.
I think there is a dimple you can drill out with a 1.5" bit which will allow you to manually release the door so you can take the interior apart easier. They then sell a cover for the dimple hole.
Chip LeMont can confirm I did this exact thing. Haven’t covered the hole yet though. I replaced this motor but it still won’t open. I still have to open glass and reach in and activate the manual unlock.
@warriorpluto nope it is still unable to open with motor. I am told that the new motor has to be calibrated the dealership and I don’t feel like taking to stealership!
The camera moves around too fast and does not give the viewer sufficient time to see what needs to be done. Hold the camera steady and move it very slowly . The video says "remove this remove that" but the camera does not stay focused on the procedure long enough to show the viewer what the removal procedure is.
i know this is random as hell but can you get to or reach the license plate bulbs through there? My screws stripped out on mine lol im trying whatever before i just drill them out
Do you happen to know which part is called for the driver door. My door won't open in inside latch only outside. I heard a pop and after that it didn't open no more from the inside.
It’s a 2017 Yukon SLE with a power lift gate, after I washed the vehicle the lift gate doesn’t work properly,I pressed the button it unlocked and i can opened manually
Bryan Hauschild rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F113558079377. Go to picture number five you’ll see the little clip there its round
S Perez hey thanks. Im trying to open it by drilling a hole in the plastic then sticking a small Philips screwdriver in there and release it. In photo 5, which way is that facing in vehicle?
I had the same problem with my 2007 GMC Yukon. I followed you directions and got the hatch open, after that the motor works from the overhead counsol. Thanks for the video. Yours was the best. I had one problem, I attached a string so I could open it manually if the latch didn’t work. Somehow I didn’t have a good exit , therefore it doesn’t work manually. My bad. Once again great video.
taxicab1365 You can find his motor very cheap on eBay
I think there is a dimple you can drill out with a 1.5" bit which will allow you to manually release the door so you can take the interior apart easier. They then sell a cover for the dimple hole.
Chip LeMont Yes that will work as well
Chip LeMont can confirm I did this exact thing. Haven’t covered the hole yet though. I replaced this motor but it still won’t open. I still have to open glass and reach in and activate the manual unlock.
@warriorpluto nope it is still unable to open with motor. I am told that the new motor has to be calibrated the dealership and I don’t feel like taking to stealership!
Eddie Wright no sir still inoperable, manual opening only. Dealership visit required after new motor installed...
This actually helped me
instagram.com/s.p.j2022?igsh=OGQ5ZDc2ODk2ZA%3D%3D&
The camera moves around too fast and does not give the viewer sufficient time to see what needs to be done. Hold the camera steady and move it very slowly . The video says "remove this remove that" but the camera does not stay focused on the procedure long enough to show the viewer what the removal procedure is.
Have you ever taken the whole thing apart? I took my apart and pretty sure fixed it but it's a nightmare to get back together
instagram.com/s.p.j2022?igshid=OGQ5ZDc2ODk2ZA%3D%3D&
OMG!! No one is making videos like this anymore. You get seasick watching it.
You see it?
There is a dimple you drill out and stick a small screw driver in to pop the lock.....
i know this is random as hell but can you get to or reach the license plate bulbs through there? My screws stripped out on mine lol im trying whatever before i just drill them out
Truth Time Yes , you can drill them out as well
Do you happen to know which part is called for the driver door. My door won't open in inside latch only outside. I heard a pop and after that it didn't open no more from the inside.
Path Safety I totally apologize it’s been so long have you figured out the issue already if not so I can help you
It’s a 2017 Yukon SLE with a power lift gate, after I washed the vehicle the lift gate doesn’t work properly,I pressed the button it unlocked and i can opened manually
PS after it dry out it worked normally
My name is GILLES H. FORTIN. BECAUSE FORTIN FORTIN, IS NOT MY NAME
I don’t know were you get my name is Gilles H. Fortin thank you.
Gilles H. Fortin your liftgate motor went out the part I’ll replace on this truck
S Perez Thank you very much G.H. Fortin
What motor part # is it and where can I get it at boss?
Path Safety rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F152207692475
Awesome and thank you
Mur Diesel 👍
Koo and this is probably also same to a Tahoe, Yukon, escalade etc
Path Safety yes they are the same
Our exterior push button doesn’t work. Everything else does.
I couldn’t see the release clip, you were either moving too much or it was off camera.
Bryan Hauschild It’s literally right next to your motor on the right side can’t miss it
Bryan Hauschild rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F113558079377. Go to picture number five you’ll see the little clip there its round
S Perez hey thanks. Im trying to open it by drilling a hole in the plastic then sticking a small Philips screwdriver in there and release it. In photo 5, which way is that facing in vehicle?
Bryan Hauschild right
CEO of you see it
It a easier way and don't have to do all that
I don’t thing you can help me.thank you very much
See it? Jesus...lol