Thanks for videos, I too recently replaced my oil housing gasket, oil supply line on my EP6CDT Peugeot 508 engine at 150,000kms. Although I discovered the oil turbo hose to housing was perished later and recompleted the removal and replacement again. Fortunately the Peugeot 508 has much more room around the motor to work 😀.
I just did this job and don’t remember if I put bigger hole bolt on motor block and small one on turbo…my car hasn’t ran right since. What would doing that cause ?
I was wondering why there were two different banjo bolts as well. My thinking was that a restriction is a restriction regardless where it is in the pipe (or circuit). I still don’t understand why the oil ways in one of the bolts are so small compared to the other bolt in the kit and the OEM bolts I removed. How’s your car running now?
Hi there, very good video and instructions. I have a Peugeot 308 with the same engine and problem. I am getting the Mamba oil feed line kit but it comes with a oil restrictor to the turbo. Will it affect turbo?
Thanks for videos, I too recently replaced my oil housing gasket, oil supply line on my EP6CDT Peugeot 508 engine at 150,000kms. Although I discovered the oil turbo hose to housing was perished later and recompleted the removal and replacement again. Fortunately the Peugeot 508 has much more room around the motor to work 😀.
why the one banjo bolt have smaller hole then other one?
I just did this job and don’t remember if I put bigger hole bolt on motor block and small one on turbo…my car hasn’t ran right since. What would doing that cause ?
I was wondering why there were two different banjo bolts as well. My thinking was that a restriction is a restriction regardless where it is in the pipe (or circuit). I still don’t understand why the oil ways in one of the bolts are so small compared to the other bolt in the kit and the OEM bolts I removed. How’s your car running now?
@@Nath_Buys_Cars I took it all back off and reused OEM banjo bolts. No problems since!
@@jeffroberts2279 really, you had to take it all apart again, Oh god what a ball ache 😢. Just about to take my car out for a test drive. Wish me luck
@@Nath_Buys_Cars your ok if you put bigger hole bolt at block
01:38 was there a torque spec or did you tighten it by feel?
Hi there, very good video and instructions. I have a Peugeot 308 with the same engine and problem.
I am getting the Mamba oil feed line kit but it comes with a oil restrictor to the turbo. Will it affect turbo?
It actually prevents too much oil goes into the turbo and making it smoke. It won't affect turbo. Please don't worry.
The pipe doesn’t look like this… It only has a screw fitting on one side
Too fast. I’m trying to see the fittings, it seems I’m missing one or was given something different
was it to brain taxing for the engineers at Mini to not use these types of oil feed lines ? actually Puegout uses the same engine in the 207 gti