You, my man, teached me a valuable lesson! Glad I am watching this before going crazy as I have to repair 4 bikes with battery issues and just thought about the main battery, but this is also something I have to consider now. ðð
Nice video. Thank you. would you be so kind to tell me the resistor value R71 at the bottom site of the controller, close to the 12 pin connector ? It exploded on the bord....
I bought 2 VanMoof bikes and accessories for over $5,000 USD as a Christmas present for my wife and myself. Each were ridden less than 50 miles and both are dead and can not be charged. THESE ARE NOT THE APPLE OF E-BIKES. They are literally garbage and the people who run this company should be put in jail for ripping people off and not providing solutions for their expensive and horribly flawed product.
I opened my cartridge because after taking it out it still emitted noise (I initially thought of selling the cartridge). Unfortunately I somehow managed to loosen the cable for the display from the main platine. Now I am somehow stuck to get it back in place. Any suggestions? Even maybe a little video how to replace the display because some of the lights in the display have already gone dead....Thanks in advance!
Hello Raz, thank you for the video. I added a new battery (3.7v lipo), but when connected to charger, no charge sign. When I disconnect the charger, I get flashing skull, but then when I reconnect charger that goes away and no charge sign. Does this mean the battery is not charged enough? Thank you
Hi cool work. Regarding the error codes: Err 48 Motor controller Error --> you suggest replacing the motor. Regarding to the community and my certified VM bike workshop it is a problem of communication between motor and cartridge caused by faulty or broken cables. Solution should be changing the whole socket/hairness which is a royal PITA.
Nice videos!! What do you think err 2 is? If i plug the charge cable i see the charge sign, but directly with err 2 code. And it seems to not charge fully. It stays about i think 80% or so? I hope you know something about this. Thnx
@@Razspareparts you think its to fix? Now i plugged the charge cable back in and it doesnt show err 2, but if i unolug the cable is shut down again. And i cant unlock the bike with the left button. If i start the app then its connecting. Its making me sick. The origin vanmoof store its on the corner where i live and you cant go there. Thats so irritating
I actually did this and worked, now I get the bike is charging, note it was dead and sitting for a year. Problem is now the battery pack doesn't seem to charge, sits at 0%. Any suggestions?
@@juvenilu the link how to fix the charger... Somehow doesn't let me share it on eBay th-cam.com/video/l1J2TCutQds/w-d-xo.htmlsi=Nwdse4sApbMpe3a4 But if you don't want to ..pop in the box all make it for a extra 10 ...
You, my man, teached me a valuable lesson! Glad I am watching this before going crazy as I have to repair 4 bikes with battery issues and just thought about the main battery, but this is also something I have to consider now. ðð
Many many Thanks. It works perfectly.
I can't drink coffee anymore. Hopefully I'll be able to fix it!
Nice video. Thank you. would you be so kind to tell me the resistor value R71 at the bottom site of the controller, close to the 12 pin connector ? It exploded on the bord....
Is 100k ohm
@@Razspareparts Thank you!!!
I bought 2 VanMoof bikes and accessories for over $5,000 USD as a Christmas present for my wife and myself. Each were ridden less than 50 miles and both are dead and can not be charged. THESE ARE NOT THE APPLE OF E-BIKES. They are literally garbage and the people who run this company should be put in jail for ripping people off and not providing solutions for their expensive and horribly flawed product.
Why did they stop working? Were they stored for an extended period of time?
My van MoofS3 is showing the lightning sign but there isn't a battery on the screen. Do you know what I have to fix to charge the battery?
I opened my cartridge because after taking it out it still emitted noise (I initially thought of selling the cartridge). Unfortunately I somehow managed to loosen the cable for the display from the main platine. Now I am somehow stuck to get it back in place. Any suggestions? Even maybe a little video how to replace the display because some of the lights in the display have already gone dead....Thanks in advance!
Hello Raz, thank you for the video. I added a new battery (3.7v lipo), but when connected to charger, no charge sign. When I disconnect the charger, I get flashing skull, but then when I reconnect charger that goes away and no charge sign. Does this mean the battery is not charged enough? Thank you
Hi Raz, how long does the battery power last when module not connecting to battery?
Could be a year or so without any problems
Hi cool work. Regarding the error codes: Err 48 Motor controller Error --> you suggest replacing the motor. Regarding to the community and my certified VM bike workshop it is a problem of communication between motor and cartridge caused by faulty or broken cables. Solution should be changing the whole socket/hairness which is a royal PITA.
Nice videos!! What do you think err 2 is? If i plug the charge cable i see the charge sign, but directly with err 2 code. And it seems to not charge fully. It stays about i think 80% or so? I hope you know something about this. Thnx
Error 2 I think is from the module... The big capacitors are shorted ... And is burning the main Fuse also from the battery
@@Razspareparts you think its to fix? Now i plugged the charge cable back in and it doesnt show err 2, but if i unolug the cable is shut down again. And i cant unlock the bike with the left button. If i start the app then its connecting. Its making me sick. The origin vanmoof store its on the corner where i live and you cant go there. Thats so irritating
Hi great video. Again. Can you recommend a replacement battery for cartridge? The one you just recharged in this video? Thank a lot in advance! L.
Can you please share the link to buy new battery ?
So basically, you need a variable dc power supply right?
Hi nice video but i canât see where you put the pins in the battery. Can you show us ? Thanks
Hi Raz, I have the same question! How do you connect the pins to the battery?
How can I contact you Rez?
Razspareparts@gmail.com
Nicely done....do you do repairs? My battery is not chargingðĒ
I do ... We talk after 27th I restart the repairs on these.. thanks ð
Thank you Raz for your video. How can I replace the battery in the module unit ?
That video is made by vanmoof try on TH-cam Search
Thanks for your great videos. Do you have recommendation when Bluetooth connection is not possible? Error 23.
Is the Bluetooth chip .... Also you might not have sound
@@Razspareparts yes. No sound also
@@leonidbogas4202 Is there a repair for this? I also have Err 23 and no sound.
@@JonBonesteel Same. Did you fix it?
@@hstg No, there is no repair for this. You need to replace the smart cartridge.
Hallo! Super VideoâïļWhat can I do when I see error 23?
I actually did this and worked, now I get the bike is charging, note it was dead and sitting for a year. Problem is now the battery pack doesn't seem to charge, sits at 0%. Any suggestions?
@@juvenilu BMS shut down of battery dead .. open up and check voltage in the cells...
@@juvenilu the link how to fix the charger... Somehow doesn't let me share it on eBay
th-cam.com/video/l1J2TCutQds/w-d-xo.htmlsi=Nwdse4sApbMpe3a4
But if you don't want to ..pop in the box all make it for a extra 10 ...
@@Razspareparts yes, should be able to sort out the charger! Thanks for sending that link!