🔋VANMOOF S3 / X3 Error 6 Error 17 /18/19/20/21 how to hard Reset the BMS
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Hello guys thanks for watching..
Also I'm trying to make a channel regarding problems like this
if you have any suggestions or challenges for me I'm happy to try solving them :)
if my videos help your business and you will like to help back with a donation or simply get in touch please do so on razspareparts@gmail.com (PayPal) also don't hesitate to contact us
Razspareparts UK
this is the full list of errors to your S3/X3 Bike 🚲
Here are the battery-related
errors for the VanMoof S3:
1. BAT SCP: Short circuit
protection (main battery
related)
2. BAT_ MOTP: Mosfet over
temperature protection (main
battery related)
3. BAT_PDSCP: Pre discharge
short circuit protection (main
battery related)
4.BAT_PDOCP: Pre discharge
overload circuit protection
(main battery related)
5. BAT_UVP2: Under voltage
protection 2 (main battery
related) (try charging for a
longer period, could solve
issue)
6. BAT_UVP1: Under voltage
protection 1 (main battery
related)
7. BAT_ OVP2: Over voltage
protection 2 (main battery
related)
8. BAT_OVP1: Over voltage
protection 1 (main battery
8. BAT_OVP1: Over voltage
protection 1 (main battery
related)
9. BAT_COCP1: Charge over
current protection 1 (main
battery related)
10. BAT COCP2: Charge over
current protection 2 (main
battery related)
11. BAT DOCP2: Discharge
Over current protection 2 (main
battery related)
12. BAT DOCP1: Discharge
Over curent protection 1 (main
battery related)
13. BAT_CUTP: Charge under
temperature protection (main
battery related) (it's too cold to
charge)
14. BAT COTP: Charge over
temperature protection (main
battery related) (it's too warm
to charge)
15. BAT DUTP: Discharge
under temperature protection
(main battery related) (it's too
cold to discharge)
16. BAT DOTP: Discharge over
temperature protection (main
battery related) (it's too hot to
discharge)
17. BATFP: Permnanent fail
(fuse burn) (main battery
related) (likely socket short
circuit)
18. Error 17:
BATTERY_ NO_DSG - Could
not set discharge mode (main
battery related)
19. Error 18:
BATTERY_MISSING - Signal
bat_key_in is low (main battery
related) (battery not
recognized, also the error you
get when no battery is present)
20. Error 19:
BATTERY COMMUNICATION
Modbus battery (main battery
related)
21. Error 20:
BMS
seems to shutdown (main
battery related)
22. Error 21:
NO_ CHARGE_CURRENT
Charging state but no current
reported (main battery related)
23. Error22
SSP TI Motor chip (module
related)
24. Error 23:
BLE chip (module related)
(Bluetooth chip)
25. Error 24: OAD _ABORT
Transfer from app aborted
(Module related) (Upload was
aborted?)
26. Error 25: OAD_ CRC -
Transferred image crc error
(Module related)
27. Error 26:
OAD file transfer took too
long (Module related)
28. Error 27: OAD_PACK - No
or invalid file in pack (Module
related)
29. Error 28: ICF_TIMEOUT -
Timeout during flash
programming (Module related)
HEADER -
30. Error 29: ICF
Header not found (Module
related)
31. Error 30: \CF_ NO_FILES -
No files in pack (Module
related)
32. Error 31: ICF ERASE -
Flash erase error (Module
related)
33. Error 32: ICF WRITE -
Flash write error (Module
related)
34. Error 33: ICF CRC - File in
pack has CRC error (Module
related)
35. Error 34 -
Programming of the motor
Controller failed
36. Error 35:
PGM_BATTERYWARE -
Programming of the BMS
Controller failed
37. Error 36:
PGM_SHIFTERWARE -
Programming of the shifter
Controller failed
38. Error 37: PGM_BLEWARE -
Programming of the BLE
Controller failed
39. Error 38: -
STVC3115 read error, LiPo
might be missing (Module
related) (check if battery
m o io hor)
40. Error 39:
READ_LIGHT
_SENSOR
CM3232 12C read u - Kick-
Lock coil not detected
44. Error 43:
SHIFTER_NOT_IN_GEAR -
After 10 tries, gear has not
been reached
45. Error 44:
SHIFTER
COMMUNICATION -
Modbus Shifter (Shifter not
recognized) (Plug in tester
Shifter)
46. Error 45:
MOTOR MOTOR CABLE -
Bit2/NTC motor cable not
Connected (Motor not
recognized)
47. Error 46:
MOTOR MOTOR_OVER CURRENT
DRV8301 over temperature
(bit6)
48. Error 48:
MOTOR CONTROLLER_ERROR
Error in user parameters
(bit8) (replace motor)
49. Error 49:
MOTOR CURRENT_ERR -
Current offset calculation +-
from default value 1.0
50. Error 50:
MOTOR_VOLTAGE_ERR -
Voltage offset calculation
+*from Vbat/2 or Vbat
51. Error 51:
MOTOR_ DERATING - Max
current limited due to high
temp
52. Error 52:
MOTOR TORQUE_SENSOR FAIL
Torque sensor failed, only if
sensor required
53. Error 53:
MOTOR NOT READY - Motor
not ready during motor test or
error
54. Error 54: NO SIMCARD -
SIM card not present (Module
related) (SIM not recognized)
55. Error 55: 12C3_FAIL -
Started with l2C error on bus 3
56. Error 56: CCID_SIMCARD -
SIM card wrong CCID
(VanMoof) number
57. Error 57: READ_SIMCARD -
SIM card is detected but no
communication (Module
related) (Check ICCD number
in BO)
58. Error 58: GSM_MODEM -
Modem startup sequence
failed (Module related) (often
gone after reset)
60. Error 60: FACTORY_MODE
Display 60 when factory
hope it helps ☺️
Great! I have Err 20.
Would it help with err 44
Hey. Thanks for your videos. Last week i charged my bike. Next day i start the bike, I've got error 17 and the front light doesn't work. Also the engine got no power. Do you know what the problem could be?
@@martinm8037 I think Is just left without charge for Long time I'll try modify the charger and try charging it again... I made s video about the charger... Have a look .. cheers
@@Razspareparts thanks for your answer. I charge the bike every two to four days. And the Battery is at 96%. I will watch your Video about it.
@@Razspareparts thanks for your answer. Could you give me a link for the right video? And do you have a clou, what else could be the problem? I already disconect/conect the frontlight and the battery. But nothing changed. Would be very happy, if you can help me, so i can keep my bike alive.
Thanks for the informative video.
I would say this only works about 15% of the time.
I have tried this on numerous s3 batteries with errors 6 / 17 / 21 etc.
Even desoldering the VP cable from the battery to initiate a BMS hard restart doesn't always help.
This is despite checking / replacing the SKF-4055A BMS fuse.
Despite all I have a few batteries stuck with error 6, with balanced cell voltage of 4.1v.
Has this solved your issues?
Heyyy...
I have also this prob...
17, 20...
I replaced the little fuse and made this reset like in the video.
Have you a solution for these faults?
I also had to charge the small Cartridge battery Yesterday... But this is now working again...
Best greetings ☀️
Sven
Just gave it a try and "no luck". Still showing error 17. Any thoughts on next steps? Thank you.
Thank you for this, do you know if this also resolves Error 3 ?
Error 3 is battery related but Is short circuit I think Is something brown inside ... But you can try
Sometimes it's just a blown fuse in the battery pack print, which can be repaired. It will cost though. luckily i have zero problems until now s3 2021.
Hi, Why is in all the forums everybody saying the SKF-40 fuse has to be replaced especially wuth error 6. And what does this fuse do and why can it trip? How can it be properly tested? Can you explain? Then can you make a video on how to replace the cables inside the bike. I have another S3 with a motor related error 45. The motor is fine, since it works in another bike and the cable is broken inside the bike.
Tonight I'll solve that ..if you watch the video you will understand 😊
Hey, I looking almost every video of you and I am a DIY. I have a vanmoof S3 battery what give error 17 now I have tried to reset the BMI by connect GND and RST but did not work for me. Now on the BMS at the end there is a fuse is it possible that this fuze is broken? Because if I test it with my multimeter from the left side of the fuse to the right side there is no signal but from top to bottom of the fuze it have a signal. Or do you have another idea what is wrong. All the cells are around 3.50 volt each serie
From left to right should be full continuity to be a working fuse .... Now you need to figure out why the fuse blown depending on the state of charge you can figure it out ....
@@Razsparepartsthank you for your fast reply. Good to know that I am on the right path.
Not sure why the fuze got blowed out but I am not sure if I can figure it out because I have bought the bike like this for a very good price:) €150 euro. Now I think the fuze got blow because the owner plugged it in for a couple of months and after riding his bike try to charge but it did not charge any more.
Now I need to search for that same fuze to replace. Do you maybe know what kind of fuze it is?
Like to hear from you!
3.5 volts are at the limit of the charger....go on my latest video... Hoe to lower your charger voltage...and it will pick the battery up
@@Razsparepartsthanks, I have replaced the fuze and also changed the charger so the output is on the lowest. Everything is working now. I have fixed now over 4 batteries but looks like it is time to invest in a laboratory power supply because I use now a IMAX B6 but it take me a lot of time to charge the battery
After the reset I have error 6,17,20 on my bike
( a bike with only 200 km on iT)
what if batzery has zero energy?
You need bench power supply and Ballance charger to recover the battery... But if is 0 volts no change..
They getting permanently damaged ,you need a replacement!
Had Err 19 and 21. After the hard reset Err 21 and the symbol of an empty battery is displayed. Before the reset, the battery was at approx. 80%.
@@thomasmeyer7097 reset doesn't empty a battery
But will refresh the status of charge showing you why you had those errors in the first place....
Hey I have done it and now the bike doesn’t get battery. I’ve tested it twice. No connection to battery now. How can I solve it ? Before repair there was error 6. can u help me pls ?
ERROR 6 ...It has a blown fuse
After this, the same error 6,17,20
@@michaelbauer8637 you have the battery fuse blown...
For the last 6 months my X3's motor and gears will turn off if I turn too far to the right, for most of that time if I turn all the way to the left, the motor and gears will turn back on again. But now it doesn't work and I have error 6 and 17. I assume mine has something to do with a cable if anyone knows? Thank you:)
It might be cable inside the fork crushed and is only the signal for the speed
@@Razspareparts I will open it up soon and check. They did tell me they put too many cables through the X3 head tube when I had previous issues.
I have a S3 with sometimes error 19 then it is not reading battery level properly. To make the error go away I just have to put my handle bar to the full right and then the error is gone. My friend had the same issue also turning the bar to the full right solved it. I think a problem with the cable tree and easy to try :)