Creality Ender 3 V3 Setup Guide, OrcaSlicer, Upgrades, Review, vs. K1C
ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2024
- In this video I will walk you through the set up of the Creality Ender 3 V3 Core XZ high speed 3D printer from unboxing to your first print. This printer requires very little in terms of assembly but I will show you how to get started with the Ender 3 V3 and share with you what I was able to achieve in terms of print quality.
We will be starting with Creality Print as our slicer but after months of printing - I would highly recommend checking out OrcaSlicer. I was able to use the K1 profile with the Ender 3 V3 and achieve really high speeds with very little sacrifice in quality.
I also have several upgrades that I have made available for the V3, and other Ender 3 models such as the SE/KE and older models. See the links below:
Creality Ender 3 double sided (smooth / texture) PEI flex plates:
► embracemaking.com/collections...
Universal Spool Stand:
►embracemaking.com/products/un...
Links to Universal Spool Stand adapter brackets for various machines (like the top mount in this video)
► embracemaking.com/blogs/resou...
I hope to provide you with insight into the pros and cons of using the Creality Ender 3 V3 KE. If you are considering purchasing this equipment please consider supporting the sponsor of this video @Creality3D (As an Amazon associate I may earn a small commission at NO extra cost to you)
Creality Amazon Store (Creality Ender 3 V3)
► amzn.to/3xC31jC
Creality Amazon Store (HYPER PLA Filament)
► amzn.to/3M8zrXc
Looking for the PLUS version of this printer?
Ender 3 V3 PLUS (New!)
► shareasale.com/r.cfm?b=256912...
As Creality provided me with both the Creality V3 and their HYPER PLA filament for the making of this video this wouldn't be possible without them and I would like to sincerely thank them for sending me this equipment.
If you have already purchased the Creality Ender 3 V3 I hope this video provides you with some insights that you find useful. To support my work, please consider visiting my website where you will find other upgrades for a large variety of other printers such as the Ender 3 S1, Ender 5 S1, CR10 Smart, CR6 SE, Ender 7 and many more!
Overall, I would recommend the Creality Ender 3 V3 for beginner and advanced users alike. For the extra money over the KE model it seems you will not have the same minor quality control issues that I experienced with the KE. Overall the V3 with the Core XZ motion system feels like a more bespoke printer than the SE/KE. The Core XZ motion system makes for silky smooth layers and the four strain gauge sensors in the print bed ensure perfect first layers every time.
I loved the Ender 3 V3 so much that I purchased four more of these machines for my print farm and have started to put the new 3D printers to work. The Ender 3 V3 has been producing dimensionally accurate parts for me with no need to compensate for any strange skewing or inaccurate dimensions in any axis.
If you are new to 3D printing I still think you should have realistic expectations of the learning curve involved with the hobby. The machine works well out of the box but if you happen to run into issues you will likely get frustrated at first. Take a deep breath, stick with it and don't give up! It doesn't matter if you have a Creality, Bambu Labs, or any other popular high speed printer of this era, eventually you will need to do some troubleshooting eventually - especially if you start printing with new and exotic materials.
A few other cool tools and things for 3D printer enthusiasts. (As an Amazon associate I may earn a small commission at NO extra cost to you)
Polymaker PolyTerra PLA (One of my favorite filaments):
► amzn.to/3sdhK1x
eSUN PLA+ (Another one of my favorite filaments):
► amzn.to/3QA4tuq
Amazon Basics AAA Batteries (shown in the battery adapter)
► amzn.to/4bKqVcp
Electric Screwdriver (shown while working on the printer):
► amzn.to/3JRbbZe
Other 3D printed models in this video:
Deadpool Bust:
► www.printables.com/model/3668...
Sawtooth Twist Vase:
► www.printables.com/model/2791...
Thank you for watching!
#creality #ender3v3 #crealityender3
0:00 Intro
0:55 Unboxing
1:35 Assembly
4:56 Setup
7:13 Features
8:44 First Print
12:58 More Prints
15:21 Spiral Vase Mode
18:38 Upgrades
19:51 Runout Sensor Relocation
24:47 OrcaSlicer
26:33 V3 vs. K1C
29:20 Big Prints
31:03 Review
34:30 Outro
*********************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► www.paypal.com/donate/?hosted...
Follow me on Instagram!
► / embracemaking - วิทยาศาสตร์และเทคโนโลยี
Very nice .. I purchased (and finally received) the Ender-3 V3 Plus and LOVE it! I had the original Ender 3 when it first came out and have had to add so many updated parts to keep it halfway working -- this new printer took very little time to setup, self-test, and get working. My prints are turning out SO much better. The HyperPLA included allowed printing "Benchy" in less than 15 minutes. I still love my Resin Printer for very detailed prints, but I am totally digging this new filament printer and look forward to doing much larger prints than my resin printer can handle. (I really wanted the K1 or even the new K2 Multi-color, but just can't justify those prices yet as a hobbyist). Only issue I am having are slicers. I'd have to follow what you did and see if I can manipulate. I was able to get the new v5 Creality Print installed, but it still doesn't have the PLUS yet, and for some reason, I can't change the bed size to match mine in the profile. Still playing around.
Very informative. I really like your solution for the filament.
Thank you, really appreciate it!
Great video! I bought the V3 as soon as it hit Amazon and it's been hard to find videos that go really in-depth on it like this one does. Pre-ordered your spool stand! Seems like a huge upgrade over the included spool.
Amazing, thank you so much for your order and really glad you enjoyed the video :)
Your reviews are great, can u make a comparison of the KE and V3 and the S1, about which one to buy regarding the best value
I'll see what I can do! In the video I touch on the KE vs V3 and I would pick the V3 if you can justify the extra $$ it's definitely worth it. The S1 is a bit older and it's still a decent printer but the V3 is crazy fast out of the box with no extra work
This printer is at the next lvl
It's the Ender 3 we've all been waiting for.
Hi, very useful video.
Can you tell me the correct names of the wires for connecting the filament sensor? And where can you buy them?
Nice Video, I'll be pre-ordering your spool stand. Thanks
Amazing, thanks for your support!
Hello. Really enjoyed and learned a lot from your Ender 3 V 3 video. I ordered the spool stand. Could you explain how to configure Orca slicer to wirelessly network with my Ender 3V3? I was able to get Creality print to communicate with my printer with the IP address. I’ve put in the printer IP address into the Orca network page, but they are not communicating. I’m a complete beginner to all of this. Thank you in advance.
crazy accelerations
agreed!
great video. i recently received my printer and I am a total beginner. would you recommend i switch to something like orca slicer or stick to creality print?
Thank you! You can use whatever you're comfortable with but ultimately orca slicer is more powerful if you're doing more complicated parts and need more options and parameters. So it's worth learning it at some point
Hey, great review. Im justgettingg into 3d printing and ordered the KE, should i have chosen this one instead? Thanks alot
Both are a good choice but this one is better if you don't mind paying the extra $$
Thank you very much! I bought this printer. Can give link for filament sensor mount?
Sounds good! Right here: makerworld.com/en/models/428902
Would you be able to share the print file just for the Runout Sensor Harness Extension? Looking at this Core XZ as a printer option and would probably mount filament spool on a Skadis pegboard above printer.
I think this is the part you want? makerworld.com/en/models/428902 Let me know!
I don't understand speak english. Could you recommend me the best quality and simply to use printer between Ender 3 v3 KE, Ender 3 V3 and Ender K1C? I'm a beginner of 3D print and i need ti choose my first printer. Thank you
I’m debating on either getting the Ender 3 V3 or the K1C, if you were to pick just one, which would you recommend? Which one is the overall winner? That’s the one I’ll buy I don’t mind price
@crowndcrusader2341 it ultimately depends on your needs and budget...if you do not need to print in ABS or ASA, I see no point to spend almost $200 more.
If the price doesn't matter go for the K1C , but if you want to save the extra $$ and you're mainly printing PLA the V3 is the best value
@@diegovn thank you so much for your reply
@@EmbraceMaking thank you so much for your reply. I highly appreciate the both of you and yes I feel like it’s time for me to get an upgrade I’ve had the Ender 3 v2 and it’s been my first printer but I feel like it’s time for an upgrade I just love the fact that you don’t have to mess with the printer as much anymore to print something Don’t even get me started on leveling the bed before every print😂 I appreciate your feedback
K1C it is!
i have this exact printer as my first printer. i am having trouble with filament getting stuck in the extruder gears. It currently has a piece stuck there and i don't know how to remove it without taking the entire head apart. I've tried heating it up, forcing it to extrude and pushing the filament. Any help would be great.
I have a short video coming soon showing the print head tear down. You may have solved your problem by now but for future reference I'll have something on this topic
I was finally able to solve it today but I will be looking forward for the video.
Would you be willing to share your 'Runout Sensor Ball Joint.STL' file? That is exactly what I am looking for!! It would be greatly appreciated!!
Hi Ron, I believe this is the file(s) you're looking for: makerworld.com/en/models/428902 Thanks!
Perfect!! Thank you very much!
Would your stand work with the new V3 plus?
It should, worst case you'll need to just print the extension splice to make it a bit higher... My v3 plus just arrived so I'll be putting it together over the next few days and confirming 🙂
Bro is so underrated
Thanks Ben! working on gaining traction, not easy!
Agree. He kills it
You guys are awesome, thanks :)
I have a question for the Ender 3 V3 KE and we don’t change anything right ? Leave everything where it is?
Would love to try and help you - what are you asking to leave where it is?
The upgraded part for the ender 3 V3 KE cuz I’m going to buy the filament mount kit u made and you don’t have a video for it
Ah okay, yes the top sensor mount is here: makerworld.com/en/models/428902 it will work with the KE without changes. There are two holes at the top that fit the M5 button head screws where the old spool holder used to go on the KE. You re-use those two screws. I am working on the spool stand assembly video right now it should be out pretty soon. There will be more info about all of the applications (including pictures etc) on my website here as I build all of the applications: embracemaking.com/blogs/resources/universal-top-mount-spool-stand-accessories-and-adapters Thanks!
@@EmbraceMaking thank you 🙏
Hello, how can I connect it to the PC? I bought a USB A to USB A cable, I connect it from the printer to the computer but it does not recognize it and I am not able to connect it to pronterface:'(
Btw i installed ch340 drivers
I seem to be having a clicking noise underneath the bed of my Ender3 V3 when it moves toward the back of the machine. Anyone have any toubleshooting ideas?
I can't think of anything that would be making the noise... can you see under the bed and perhaps there is something that got stuck under there?
Would you still recommend this one over the v3 KE even with a $120 price difference? This one being more expensive. I'm torn between choosing those two right now
If it's not too late I would still recommend this one given the price difference. The KE is great if you're bound by your budget but I would say this one is worth the extra $$
@EmbraceMaking sadly too late as I got the KE, it's been good so far but there's some occasional fails where it spits a ball of plastic. Otherwise I'm fairly happy with it.
ender is always so freaking stringy, I had an ender 3 se and returned it because of stringing. so I ordered ender 3 ke twice both of them were returned because of unsolvable stringing. and now I want to order this one and still I can see a lot of unexplainable strining
Could a guy use cura slicer
Yes absolutely!
I'm confused, this isn't a Ender-3 V3 SE? The naming scheme on their machines is pretty odd.
Yes they didn't make the naming that straight forward... but basically... Ender 3 V3 SE is the cheapest one with Marlin firmware, Ender 3 V3 KE is the next step up with Klipper, and Ender 3 V3 is the one in this video with Klipper and core XZ etc. That's what I was saying in the beginning of the video though... I feel like for this one they should have just called it something completely different.
All this 3d printing stuff is just make-believe.. we just have to believe we can make things ;)
Lol manifest your designs with positive thoughts