1/24 Lancia Delta S4 '86 San Remo rally. Engine detailing. NuNu 24005 #4
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- Hi guys! Today we will have a long video with engine detailing. Let me remind you that in this series we are building NuNu's Lancia Delta S4.
Since in this model the engine is given in some detail, we have a little space for creativity. I had to look through a lot of references in order to understand which wires, hoses are used, and most importantly, how they are connected. For detailing, I used many different wires, transparent pipes for the fuel line, imitation of flexible metal hoses. In addition, I created 3D models of components that were not in the set and printed them. Fans of technical accuracy, do not judge strictly, I could be wrong in detailing due to insufficient information on the real prototype. The whole work took a very long time, about 75 hours. I hope you will enjoy!
Thank you in advance for watching and see you in the next video:)
playlist for full serie:
• Lancia Delta S4 '86 Sa...
social media here:
Facebook / scaleautoshop
Instagram / scaleautoshop
Scalemates:
ongoing projects www.scalemates...
projects on the shelf www.scalemates...
And how is this possible, that you have only 12,6k subs? Nice and beautifull engine!
may be because i don't buy subs and views 😃. thanks for viewing👍
I've been building models for longer than I'd like to admit. Never have I seen your level of detail & attention. As far as accuracy, no race car is like any other. I doubt anyone beyond a team technician could find any fault.
Great job.
thank you for comment, mate!
😮 Im a huge rally fan , and S 4 is my fav rally car. RIP Henkka and Sergio . Your skills are from the another galaxy .
Thanks mate
Wow, what a build! And what a power such a relatively small engine has, thanks to the twincharger.
thanks for reply!
From tig welds made from glue to the the coil inside the heat shrink to keep it from kinking that was 29:49 of pure artistry. I’ve seen a few modelling channels but this is a few levels above all of them. 👏👏👏👏👏👏
thanks mate for such a nice comment for me 🤝
I have been building models since I was teen I am now in my 50s. I consider myself a modeler but you my friend you are not a modeler, you are an artist with God giving skills. Thank you for sharing.
thanks my friend, your comment give me more inspiration ❤
Lavoro incredibile!! Bravissimo 👍
Ogni volta che vedo lavori così mi passa la voglia di fare modellismo😂
Anch’io ne sto facendo una(trovi il wip su mab modellismo alla buona)e non mi avvicinerò neanche lontanamente a questo pezzo d’arte
Lo stesso posso dire quando vedo il lavoro di Alessandro Prini 😂 Grazie Ragazzi
I watched this video on my TV. If you view it on a phone, you miss most of what he is doing. I was amazed by all of the tiny detail work you did Oleg! The tiny fittings, the welds, the wiring... you made this kit beyond belief. I’ll stick with box stock my friend 😁
thanks James that you spent some time to watch it :) :) :)
Amazing bro👏👏👏, this kit is brutal👍👍👏👏👏👏
Glad you like it Roman🤝
You kill me once again... I'd love to only approach your skills.
Thanks mate that you watch it
You brought this kit to the next level !! :o
Thank you mate :)
Close to perfection
thank you !
Inspiring. Thank you.
You are so welcome!
My goodness man! You truly are an artist. The level of detail is incredible, absolutely stunning. You have got to be the best on youtube.
Wow, thank you!
Love your use of putty and styrene to simulate weld lines. Ingenious!
thanks:) styrene weld lines are easier to make, but putty can take any complex form.
The amount of datails is insane. Marvelous. The only thing that I don't like too much is the Kevlar decal. It looks a bit off in front of all that impressive work.
may be that is because kevlar is not weathered and looks vivid. thanks man!
If I were told this is a real engine I'd believe it, incredible work!
thanks :)
Amazing detail. Makes all my models look like a 10 year old built them. 😂
Thanks man :)
The amount of details is just unbelievable. Thank You for sharing. Great work. Cheers!
Glad you enjoyed it!
Beautiful craftsmanship, keep up the good work. Cant wait for it to be done
Thank you very much!
OMG. That is incredible. The S4 is my next build, but I know it will never get anywhere near the quality of your build. Superb man, you are off the scale. Thank you.
You will get it, man. Thanks✌️
Scale modelling taken to the next level. Absolutely amazing. Thank you for sharing your skills.
Any more realistic and we shrunk ourselves we'd be flying down a rally stage.
thanks for watching, welcome everytime :)
Truly a masterpiece, exceptional! And extra Kudos for the Need for Speed Porsche Menu Soundtrack at the end ;)
Glad you liked it! :) NfS is our all :)
this is absolutely the most perfect model I could ever see on yt and this modeller is for me the biggest star there is on yt !!! absolute master !!!!!! I'm a fan of you !!! wonderful work it just can't be found !!!! GOOD LIUCK TO NEXT MODEL !!! SUPER !!! WOW !!!!!!!!!!
Thank you so much 😀
Chirurgical!!!! Much respect to your work!!
thank you mate
Da hast du dir richtig mühe gegeben!!!!!!
Absolut der Hammer!!!!!!!!!!!
Ja, es hat lange Stunden genommen.. Danke✌
Hut ab für diese Geduld und durchhalte Vermögen!!!!
what a epic engine ... well done very well done as always :)
Many thanks mate👍
Realmente impresionante el nivel de detalle, los recursos utilizados, el ingenio en la creación...y un sinfín de cosas más. Espectacular!!
thanks a lot mate!
Deine Arbeit wie immer der Wahnsinn, soviel Details, das ist einfach der Hammer. Klasse Arbeit 😊
Danke Benedikt 🤝
Mind-blowingly brilliant 👏
thanks mate!
You know how an engine is put together. And you know how to scale model too, a great combination. Well done, excellent work and I enjoyed watching your skills 👌
Glad you enjoyed it :)
awesome detailing, keep going!!
Thanks, will do!
That was just sublime 👌👌👌👌
thanks for watching :)
masterpiece
Incredible job!
thanks mate
Clean build, level of details is superb!
Glad you enjoyed it
Wow, unbelievable, you've got MAD skills. Treuly stunning work.
Thank you very much!
Great 👍
Ray
thanks Ray
So awesome you a a great model maker.
thanks mate🤝
Шедевр
благодарствую :)
Amazing job...
Thank you!
That is truly a work of art. Amazing! The detail is phenomenal.
Thank you very much!
Amazing amazing amazing 🙌🏻
Thank you 🙌
so GREAT!!!!
thanks man:)
That’s some absolutely beautiful work
Thank you kindly
Incredible job, a real master!
thanks for visit mate
It's a great job !!!!
thank you for visit :)
Totally amazing! You are very skilled!! I’m far from that !! Thanks for sharing
Thank you! Cheers!
Fantastic work Sir, I'm sure that took many hours to do.
Yes it was many hours.. :) thanks
Amazing work mate!
Thanks for the visit👍
I saw the video like 10 times and I'm only beginning to absorb all that detail, really an inspiration, someday I'll post mine !!
This is awesome
thanks a lot :)
Wonderful, methodical, minimal production here. I really liked the music and mood. Regarding your soldering, keep working at it! The basic problem is your metal surfaces are not warming up enough to receive the solder - you are making what is called cold solder joints. Keep the iron on your metal longer; once the flux boils, slowly add solder to the iron tip. It will flow to the flux once you have enough solder on the iron. Beautiful result, Oleg - I was wondering what happened to this model! Haha.
hi Сurtis, yes you are right. Soldering photo-etched steel is a headache for me. thanks for the advice👍
Measmeeising viewing my friend. You’ve done a fabulous job so far. Loving the engine rework and little details, they make a huge difference don’t they
Thanks Robert, yes, I really liked to do these details.
Wow amazing work man keep it up!!!
Thanks, will do!
Absoluter Wahnsinn. Wie kann man hier den Daumen runter klicken???
Danke sehr:) Vielleicht schaut man das Video kopfüber 😀
WOW ! Imm 74 and know how to learn more, faster! U r really good. WmRD
thnks man!
Amazing work!! :)
Thanks a lot!
Really really nice again! Your detailing is just amazing👍
Thank you so much 😀
Einfach nur genial 👍👍👍👏👏👏❤️❤️❤️
ich bedanke mich 👍
Love this build. It is tough to differentiate between the real car and the scale model! Keep it up! :)
Thanks! Will do!
Very nice job Tom. I think you do incredible work. I do remember telling you that I would like to see you do some super detailing and you telling me it was not your style...LOL looks like you are in the groove now. I hope to see more like this and see you continue to add even more details.
because this kit good suits to a little upgrade :)
That's a masterpiece!
thanks mate✌
Really Nice Work!!!
Thanks for the visit Michael
Incredible work!!!! I started my Beemax S4 now and your videos help so much. Not that I’ll be even close to your perfection, but I’ll try my best ☺️
Quick question, which glue are you using for the photo etched parts?
Thank you
Thanks for comment mate,
i use CA glue for PE parts in mostly cases.
@@Scaleautoshop thank you
May I ask you which wires and joints you are using for your engine?
Thank you
Thomas
Amazing
Thanks
as usual incredible work! I wonder what you can get out of the similR Ford GT.
thanks mate. yes i need to start with similR someday..
@@Scaleautoshop do you have a similR kit at home? I look for the pescarolo for ages but it is rare and to expensive on ebay
new to the channel ,your work is inspiring , stunning attention to detail!
Thanks and welcome
Amazing work and incredible details. Where do you get the tool that you use for decals at 16:06? Looks like some kind of silicone or rubber, but I don't know what to search for :)
thanks mate. look fot this tool in web as art silicon brush.
@@Scaleautoshop Thanks :)
огонь!
спасибо :)
Looks awsome buddy really like how it turning out
Thanks Keith!
@@Scaleautoshop my pleasure buddy ur card shouldnt be much longer yet if it hasnt arrived already tjeres a delay in the irish post service wit all covid and my father inlaw just passed from it too not more than 3 weeks nearly anyway stay safe
amazing👍🏻👍🏻👍🏻
Thank you 👍
@@Scaleautoshop please sub my channel tq
That's art. But isn't a piece missing? The turbo inlet is open so far as i can see, there should be the connection to the airfilter.
it may well be.. if you have any references, send it to my email :)
Awesome build bud. Love the engine detail. Are those the top studio hose connectors? Where did you get the tie wraps? Thanks
thanks mate. Hose connectors i printed myself. Tie wraps are from Czech truck model CTM 24081 Cable binders
Quanta pazienza e precisione. questo è talento... bravissimo! posso chiederti che tipo di materiale usi per riempire al minuto 5:48?
Ciao, grazie caro amico. Questa è una fermata di mastice bicomponente "Tamiya epoxy putty"
Brilliant work. What reference material do you use for the extra detailing?
i looked for a tons of references - photos, videos in youtube.
A true masterpiece that inspires me a lot.
Same as all your other video’s.
Very interested to find out where you buy all your accessories (hoses, etc). Do you have links??
thanks mate! i have got them from the various on-line and warehouse shops. Just look in web.
Very good work!!! A question what kind of metal thread do you use??
thanks. i use copper wires 0,2-0,3-0,4-0,5 mm etc.
Hello, firstable my best compliments for your amazing job. Please, Can you tell tell me the size of hose joints and braided lines you used for gearbox oil? I saw you scratch build an exagonal tube tube for ignition, what size is and were I can found it? I hope I haven't disturb you with my questions. Compliments again
Thanks mate! as i can remember, for gearbox i used 0,6-0,8mm braided pipes. Hexagonal pipe is scratchbuild from 2mm tamiya's round beam. if you need i can send you some 3d parts to print them. you can write to my email.
My teen age year dream car....
yes, nice car..
Hi
good work !
I have a question the parts of the oil cooling system on the left side and under the radiator you made them or you took them from another kit?
thank you for your answer
see you soon
Hi, thanks! Some parts are from detail up set for this kit, some parts 3d printed. Tubes etc are MFH clear tubes.
This is a masterpiece! So many details. Is it even possible?! Did you try to start the engine? :)
Not yet, thanks :)
👍
🍻
Beautiful work as always. I have a question, where do you get your hoses and wires from?
Thanks mate. I cant remember all the shops. Ebay, hobby shops etc.
как научиться делать такую детализацию также красиво? и где такие крутые проводки купить?
я по ютубам и научился ) проводку покупал где прийдется, даже в хоз магазине. Посмотри там где есть товары для бисероплетения, катушки с проволокой.
Stunning work man! Hey quick question... that clear tubing you filled with the yellow paint, what is that and where can it be bought? Thanks in advance :)
hi, thanks! clear tube i bought at hobbyeasy i think this is MFH cleartube 0,6 or 0,8mm or you can buy similar
Олег, это божественно! Подскажите, an фитинги напечатаны на 3d принтере? Можете ссылкой на модель поделиться?
Привет, спасибо большое! Фитингов к сожалению нет, но они не сложные их можно самому нарисовать в простом редакторе. или Найти на бесплатных 3д ресурсах.
Fantastic work! What is your source for the hose fittings? I have been looking for that type of stuff for a while now.
thanks! i made them in CAD and printed with 3D printer anycubic photon.
@@Scaleautoshop I have a 3d printer as well. Been looking for an stl.
You should do a Tamiya sauber C9 !!
i am now work on it parallel :)
Cannot wait for the videos !!!!
Fantastic detailing, its going to be a shame to put the body on this.
thanks mate. rear cowl is detachable :)
Could you please tell me what wire did you use for the ignition leads ?
Hi, i use 0,3mm wires for ignition leads
@@Scaleautoshop Thank you. Is that the external diameter ?
@@secret_one without insulation, 0,5mm with it
@@Scaleautoshop That is of great help. Thank you so much.
Hi
Hello :)
Классная работа но нет нормальной фоновой музыки по этому ролик гавно
хахахаха, здесь не музыкальный канал.