Normal Inverter to Solar Hybrid Inverter | MPPT Solar Charge Controller | Smarten Prime+ |

Solar Panel buying link: dl.flipkart.co...
MPPT Solar Charge Controller buying link: dl.flipkart.co...
SB Solar Shop TH-cam Channel Link: / @sbsolarshop2020

[@TechieVenkateshhTamil]

wow what a knowledge and explanation bro, superb

[@palaniappanmba]

வாழ்க வளமுடன்.
மிக அற்புதமான அனைவரும் புரிந்து கொள்ளும்படியான எளிமையான விளக்கம்.

[@kzzee]

Very Good for going Green! Thanks for sharing knowledge.
I have 200 watts panel , Smarten MPPT and Proper 4sq mm Solar DC Cable and MC4 Connectors. I am getting upto 2.5 Amps in morning 8am shaddy light. Sametime I tested with normal 4sq mm electrical wire, I was getting only 1.8Amps. The difference is huge. DC cables are made of more strands to minimize power loss during transmission. Also, note length of the cable affects the amperage. After converting to 220AC with interverter you can transport it to entire house, power losses are minimal.
I see you are getting 2.3 Amps. You have 180x2=360Watts panel cable of charging upto 15 Amps in full sunlight. Try to minimize the solar cable to 10 meters, you will see the difference.

[@mahind.s]

Nice & clear explanation bro👌

[@appaloelevens9130]

அருமை தம்பி.Very informative.Luminous retrofit எனும் சாதனமும் சாதா இன்வெர்டரை சோலார் இன்வெர்டராக மாற்றலாம் என கூறுகிறார்கள்.இதைப்பற்றி தகவல் இருந்தால் கூறவும்.

[@devasir2372]

Clear explanation....

[@jeevamanokaran6737]

அருமை, வாழ்த்துக்கள் மதன்

[@agathiyanveeramani2099]

Super machi

[@vigneshd8873]

Nice and good explanation thambi

[@venkateshvenkivkm873]

Super 👍👍

[@gautambalaji5859]

Tks bro

[@GS_Dhans]

Super👍👍

[@sopanammedia4642]

Super👍👍👍👍👍

[@revanthkumar4761]

😍😍

[@devikakala7463]

Flipkart solar panel Bangladesh Sunil Kenya Flipkart irangi vanthu fitting Panna mattanala

[@shahidkadayil8276]

If dc mcb box not connected what happens. If we will only mcb without fuse .what happens.

[@maathiyosiwithmadhan6005]

There is no problem if dc box not connected. But the fuse is must because in case of high Amps the charge controller will be shutdown. MCB is use to cut off the power supply from panel in case of any maintenance only otherwise it is not a essential thing

[@nathantilak201]

Better use mc4 connectors and branch connector. U have already purchased db box that cost is more. Branch connector u can get it from 250 to 300 bro.

[@maathiyosiwithmadhan6005]

Sure bro. Thank u

[@9791686565]

& also solar Dc cable should be in Solar systems

[@mannojkumar4448]

ji,mc4 conetor podala,,dc cable podavenama ,,normal cable podalama

[@maathiyosiwithmadhan6005]

Hi bro. Dc cable tha potrukkanum but enkitta ac cable vetla irundhuchu so adha use pannitan. Ac cable la above 4 sq mm use panlam

[@katpc2009]

How many appliances are running through panel in day time

[@maathiyosiwithmadhan6005]

I not checked it’s full capacity. I am using two 9 watt led light one fan and one led tv

[@user-eq1zb1fe2h]

நண்பா ஒரு சின்ன டவுட் ரெண்டு பிளக்கை உன்ன சேகரன் ஆல 24 வோல்ட் ஆகாதா தோளொடு தானே சொன்னீங்க

[@maathiyosiwithmadhan6005]

Parallel ah than bro connect panniruku so voltage add agathu amps tha increase agum. Series la connect pannuna tha 24 volt agum

[@harneetsingh66666]

Smarten mppt controller= 3800rs

[@dsramkumarful]

Total cost for conversion please

[@maathiyosiwithmadhan6005]

19500/-

[@rithyagagayathri6373]

னன