Spider-Man Mask PlayStation 4 !!! WITH MECHANICAL LENSES ON A 3D PRINTER !!! TUTORIAL VIDEO
ฝัง
- เผยแพร่เมื่อ 8 ต.ค. 2024
- HELLO !!!
Now you can assemble the Spider-Man mask from the PlayStation 4 game using a 3D printer and my files
here you can buy my files www.etsy.com/l...
you need to assemble the mask
1) files for 3d printing
/The front shell is one piece, the front shell is divided into two parts for printers with a printing area of 220x220x250
/Lens, right and left
/ lenses are movable
/driver mechanism mg 90s and sg90
/bar
/ housing for infrared sensor, cover for tumbler, cover for infrared sensor board
2) templates for lens and chin
3) arduino sketch, detailed circuitry for the spider man mask electronics
!!!!!!! all files are zipped, use winrar archiver to unzip !!!!!!
//////////////////////////////////////////////////////////////////////////////////////
3d printing tips !!!
1) I print the face shell with a nozzle 0.6 / layer height 0.3 / speed 60 / support / plastic Petg
At these printing parameters the mask will print for about 17 hours
2) Lens / nozzle 0.4 / layer height 0.2 / speed 60 / backing / plastic Petg
3) printing of mechanism and other parts / nozzle 0.4 / layer height 0.2 / speed 60 / plastic Petg
//////////////////////////////////////////////////////////////////////////////////////
ARDUINO
the sketch shows a 94 degree servo angle, this is the correct angle for my servos,
.
If you don't like the angle, you can change it.
If the sketch does not work on your board you can try
download arduino version 1.0 or 1.0.6
//////////////////////////////////////////////////////////////////////////////////////
the tools and materials you will need to assemble the playstation 4 spider-man
1) 3D printer
2) computer
3) pliers
4) insulation cleaner
5) file
6) utility knife or scalpel
7) screwdrivers
8) scissors
9) screwdriver
10 hair dryer
11) soldering iron with a fine needle
12) tin with solder
glue
1) hot glue gun
2) rubber based glue
3) cyanoacrylate glue
other
1) 1 mm thick transparent plastic / size 15x40 cm
2) perforated film / 15x40 cm
3) eva foam with thickness of 1-3 mm / size 10x15 centimeters
4) !!!!!!22 screws m3 length 10 mm and 3 screws m3 length 25 mm !!!!!
////////////////////////////////////////////////////////////
THE ELECTRONICS NEEDED FOR THE ASSEMBLY
1) arduino nano or pro mini
2) IR sensor HW-201 2 pcs.
3) infrared diodes Tcrt5000L 2 pcs.
4) 10 K resistor
5) SS12D00G3 toggle switches 2 pcs.
6) Servo drives MG 90s 2 pcs. or SG90
7) Battery compartment for 2 AAA batteries 2 pcs.
8) 4 AA 1.5 volt batteries (I recommend to buy 4 pcs / AAA 1.2 size 1100 milliampere batteries and a charger)
9) wires (the wires can be disconnected from the umbilical charger)
///////////////////////////////////////////////////
links to accessories (all electronics I bought on aliexpress)
1) arduino nano
aliexpress.ru/...
2) IR sensor HW-201 2 pcs.
aliexpress.ru/...
3) Tcrt5000L IR diodes 2 pcs.
aliexpress.ru/...
4)resistor 10K
aliexpress.ru/...
5) SS12D00G3 toggle switches 2 pcs.
aliexpress.ru/...
6) servos MG 90s 2 pieces or SG90 (on aliexpress very often send fakes, so it is better to look for servos in your city or in internet stores in your country)
7) perforated film (you can buy it in an advertising agency)
aliexpress.ru/...
I didn't buy the perforated film from this link, so read the reviews carefully.
I love the fact this dude LITERALLY shows us how to get the eyes moving, such a badass.
I think it's cool that we've gotten to the point where we are so close to just having a spiderman mask that is just about there in terms of hownthe tech likely function. Small eye sensors controlling gear functions. But also, spidermans mask i believe has some form of screen or HUD in-game.
Either way, i wonder if there is a way to make the eye movement system even smaller?
the lens movement mechanism can be reduced. you can take a micro servo or fundamentally redesign the mechanism. the display is more complicated, it all requires power, and it is better to use lithium polymer batteries, but they can be dangerous, as if short-circuited can explode, so I use regular batteries
When I see comments like yours, I only think about how simple it would be for a technology company to get to work on that using its best engineers and scientists with a big budget, without a doubt we can create a Spider-man mask as simple but technological like fiction
@@Ninox32tgretwh If Disney wanted to they would, just look at the fully retractable lightsaber prop they designed for the Star Wars theme park.
Now we are just waiting for someone to develop a set of ICs especially made for this one, so instead of discrete parts, we well have one PCB integrated in the mask.
Yeah it would be cool if all you needed a was super small sensor that is thin and won't bother you at all
Stan Lee would be proud of you 🇧🇷
É br é?
@@pedrodanyelcostademoura867 sim
BR?👊😳
Facts
and steve ditko!
This is amazing!!! The fact that the sensor actually copies your eyes is just so cool!! One of the best lenses I've seen!
This video and creation deserves millions of likes and views down to your incredible engineering
I have no words to describe how cool that is. I am really excited to see the whole thing with the cloth and webs on it!
Dude this is freaking awesome! Props to you for all the hard work and dedication! 🕷
Love how everyone’s obsessed with the moving lenses lol. Cool mask
This is cool, you’re the only person I’ve seen that’s made it move using eye movement
Thanks so much for your indepth assembly! Much appreciated. You're an asset to the Spider-Verse community :)
Hey man, just gotta say happy to see you putting out another video and your older video on the homecoming eyes was such an inspiration to me to do it myself, I still cannot believe how you don’t have more subscribers or how more ppl don’t talk about what a great tutorial you’ve put out. Oh well I guess we can have the secret guide to Spider-Man eyes all to ourselves >:)
Everyone thought this was impossible. Until this chad came along
Such a helpful video for others who want to make this. You gave all the materials and files needed, amazing job
I have no idea what this guy is doing but it's amazing
The most badass Spider-Man mask I've ever watched!
Good to have u back uploading videos and btw can u try making the lenses with 3 expression the normal, shock, and serious/squinting like calvins?
this is interesting, you need to think how to control the emotions. or just make them turn on in turn
@@alexstark9471 yeah and I notice that cavin moving lens has multiple layers of lenses that can move which part would move and not but i hope u could try and do it in future videos or maybe not anyways I like your videos
@@alexstark9471 maybe it could be like a setting the lenses have, you flip a button and instead of squinting it's programmed to be surprised, and can be switched back and fourth. Sounds way easier said than done, especially because idk where to even start designing that but that's what I was thinking
This guy may become a real spiderman someday
Really amazing dude, I may be late to the party, but really great job my man, and even if you prefer that the PS4 suit, it can also be used for any suit in the MCU before Civil War (unless the eye emotion thing were introduced earlier and I didn't know)
Woow..... Finally the one of the worth watching here in youtube
Impressive, your parents must be very proud
Why don't you have millions of views??? My compliments on the work you have created!
Thank you for your support, I hope there will be millions of views in the future
hi!! love your work on it. one question: Why you didn't use the same sensor that you took off from the hw-201? the tcrt5000i are better or can i use the original ones from hw-201?
Hi tcrt5000 it's just infrared diodes , I use them because they are smaller
@@alexstark9471 thanks for your response !!!! Amazing
Really looking forward to giving this a try in a few months when I've finished making my advanced suit.
Not me watching this at midnight having an exam tomorrow
if youre able to make the timing close to exactly when your eyes squint, than this would be perfect. most this is very cool!
This is absolutely next level! Very underrated!!
idk why but i love the ps4 lenses
This dude is the real deal Spiderman/ Peter parker
Bro is gonna be the next spider man SONY HIRE THIS GUY
this is legit the coolest thing i have ever seen will i be able to buy the complete mask please mr stark
Hi, thank you. only the front shells without fabric will be on sale.
@@alexstark9471 can i get like a fully assembled mask without the fabric
marvelous! I watched this video from start to finish!🤟 full immersion in the process. cool job! and plus asmr) so calm. you are definitely a genius! respect! it's LIT!🔥🔥
you back bro love you work just amazing and they way you show 👏🏻👏🏻💪🏻 just amazing 🔥🔥
Awesome! Looks just like from the game, only the red fabric is lacks.
bought the file off etsy i cant post the pic here but man you are talented thank you so much im so excited im waiting for my FFH suit to come in before I debut the whole thing buts it came out really clean
Your talent is really cool, that's crazy, and I want to have it🙂
Best one out there this is way better then a dumb button!!!! Hope u dont mind but I'm gonna steal that and work on making it u have to hold ur eyes to keep it like that. May the force be with u
It's very cool, and the thousands version of the faceshell? will you also upload it? you should also make iron man helmet tutorial, this very cool
This is the best one by far
Great work!! What function does the 10K resistor serve in the arduino? Is it just for protection?
10k acts as a pull-up resistor
i dont have a printer or time to make something like this but god i wish i did, just let me buy that lmao XD its so cool
I will buy one as soon as it’s available! It looks amazing
This is so amazing.. I also want to make this but...i dont have face shell... 😥 and either I don't have money to buy that face shell...
New subscriber. And I’m telling my friends to subscribe as well. Dude this is amazing!
Super amazing!! I wonder if there’s a way to make it track your eyebrows/cheek. When you squint, your cheeks scrunch up, and when you frown, your eyebrows go down… so I wonder if that’s a possibility!
Now Peter Parker can build this for his new suit if he decided to drop the Stark tech.
INCREDIBLE JOB!!!! Buying the files to support your work
What are you head measurements if you don’t mind. What sizes did you use for this mask
Stan lee would be soooooo proud of you
Parece que fuera el canal de TH-cam de Peter Parker y nos está explicando cómo hacer una máscara con nanotecnología
The perfect one and it's the only one I can't make or buy since I don't have a 3D printer
Great question: when scaling, do you need to scale the machanized parts? or just the outer lense etc?
Here's a sort of price guide (without taxes),
Everything without the 3D Printer or filament will run you about 225 USD, including the template.
On amazon I couldn't find the Sidewinder X1, but they did have the X2. That along with the filament will give you a cost of about 640 USD in total.
The Artillery Hornet w/ the filament will give you about 470 USD in total.
In conclusion, if you have a way of getting a 3D printer for free, like through a friend, then at the very least this will cost you 220 - 230 USD. The second cheapest option is getting it done at a 3D printing service, I don't know how much they usually cost though. If you don't have both of those then your best bet is just getting the Artillery Hornet. I don't see what the difference is between the Hornet and the X2, and for an almost 200 dollar difference I'd say it's a good deal.
What amazing work do you sell ready-made?
Hey man, awesome mask! Just one question though, how much experience do you need to make this in terms of electronic skills?
You need to learn how to solder with a soldering iron with a thin stub and buy a good tin and solder and you'll get it all much easier
Hello , i just wanted to say this video is amazing from fiction to reality kinda stuff. wanted to ask what the necessary skill's that you mastered to get this idea to work. I really want to learn more about this, thank you keep up the good work spiderman.
Thank you, I have mastered 3D modeling, 3D printing, worked with the arduino and servos, like everything. the mechanism I made in children's 3D program tincercad
Нереально круто. Был бы ещё 3д принтер..
Wish I had a welding helmet like this
This is spectacular my guy!
Ha spectacular spider man
So, is there a way they could close all the way?
Also, is the way they’re being controlled is when you squint, you check moving out in triggered the sensor? Did I get that right?
Cool spiderman mask i would buy it if i had enough money can you make miles morales version of it?
Hi, thank you. The mayle morale is in development, the mechanical part needs to be corrected for stable operation
@@alexstark9471 alright thanks to let me know
Can we make this on a mask instead of face shell that would be so ps4 accurate...can make one video on that tutorial....pls I would love to see that!❤
Can we see u wearing full spiderman suit pls i really want to see it :)
Are your m3 screws made of plastic? I'm trying to cut steel screws and it's impossible.
Do the color of the wires matter besides being positive and negative?
Stan lee would be proud of you
wow ~ real Mask~
DUDE I LOVE THE MASK! Just wondering what's the name of your 3d printer and if you remember how much did it cost?
my printer is called Artillery sidewinder x1 price of about $300
so if i wanted to attach a fabric mask to it i would just take off the tape that’s holding the lenses and reattach the lenses after the fabric is on shell? i hope that made sense 💀💀💀
Is there a already pre made mask on your shop because I don’t have a 3D printer😢
Hi! Your mask is a dream!! Is there anyway to shut completely the lenses of the mask?
I think it is possible to close the lenses more, but it is necessary
to redo the mechanism.
This is freaking awesome
Огонь!🔥 Очень много труда🤪
This is amazing!!by the way can i have the arduino code you use?
Wish I really want to make this mask!
Hello Alex Stark,
Can I only buy arduino sketch parts in your shop?
I really need that
I love the mask~ tho one note... Your support's Z distance is too close which is why you had to manually remove all the supports so roughly... have you tried setting it farther? Im using a .4 nozzle in mine and i have set my supports to .15 so that its still close but not too close that it get stuck with the main print. Not sure how far a .6 nozzle tolerance tho
If I increase the gap between the model and the supports, the model begins to pull away from the supports at the edges, and then the model comes out the wrong shape and there is more vibration on the last layers of the model on the axis z. Perhaps it depends on the plastic.
Can i use this method for any spiderman 3d printed mask
Incrível, envia 1 para minha casa por favor !
I have a question... what you sell are just the files for us to print? Or do you sell the materials already printed so that the buyer can only assemble it?
I sell files and ready-made masks. I do not sell kits for self-assembly yet.
I don't have a 3d printer or access to one, can't you sell everything ready-made so I can assemble it at home? and excuse my english but it is not my native language
Can I print all parts with PLA ? Why do you use PETG ? Awesome video btw
you can use pla, I just feel more comfortable printing with petg, thank you. try petg, it's strong enough. it's easy to work with and shrinkage is minimal.
@@alexstark9471 thx man ! 👌🏻
I’m debating buying this to print it myself, but my printer isn’t big enough to fit the files. If I did buy it, is there a tutorial you know of of using a CAD program or maybe blender to split it up for good attachable prints?
hello , the front shell is divided into two parts , but if you want to divide more you can use the meshmixer program
mano você é muito esperto que mascara foda
124.010 view e 6,5 mil likes e 2,57 mil inscritos e 191 comentários
Hi, will you ever sell finished kits??? This looks amazing
Yes, ready-made face shells are on sale from time to time in my store, the link to the store is in the description under the video
Would this work without a faceshell? Like of course using a thick fabric and thinner batteries and such
no lmao it would be so distorted
@@tubbsy_ What would be distorted
Would Arduino IDE 2.2.1 work or does it need to be 1.0.6
So i have been seeing the shop and i have a question, are all the products the files for the 3D printer and arduino? Like, are they all just files, or you sell the assembled mask? I'm asking this because unfortunately i don't have a 3D printer
Also, if you ever start selling the masks already assembled, would you international ship it?
@@widebhb950 Hi . I make pre-made masks . soon to be a small batch in the store on etsy
@@widebhb950 I send to many countries
This is amazing dude I will make this 100k vewis
I tried building this but after compiling the code to my nano, nothing happened, my connections seem to be fine and everything lights up so it has power, but no movement happens
When will it be back in stock on etsy?
Very perfect !
Крутая маска!!!!!!
Soooo Amazing 👏👏 😁😁😁👏👏
So probably a stupid question but when you pull out the pink and blue red and yellow wires where did those come from you said from an umbilical charger in the description but I can’t find what that is.
I take the wires from the usb cord
@@alexstark9471 thx
@@alexstark9471 if I already have positive and negative wires does the wire color matter?
@@q-pid06 colors do not matter, I usually use red for + power and black for - power. and for the other pins any colors
@@alexstark9471 thanks
Serious question how much do you want for it
This is gold
Excellent 😊😊😊👌👌👌👌😊👍👌
1:39:43 can you make the anti ock mask?
What a cool video
It's rad, but I feel like it could have been much smaller
Dude, thats such a badazz!11