LOST PRESSURE ON WASHER

Customer says he has no pressure and the stream pulsates. The pressure is actually good, but once the trigger is pulled, the pressure drops and the stream pulsates. This is a valve replacement job.

[@OldManYelllsAtCloud]

love these videos, thank you.

[@Brian_the_repair_guy]

Glad you enjoy them. IF you have a suggestion, let me know

[@alessandromarquez9782]

Hey bryan stumbled upon your video. I have a similar problem. Mine is a dewalt electric power washer.

[@Brian_the_repair_guy]

I hope the video helps you out

[@thomaswhitty3742]

Where to buy a valve kits from Thomas

[@Brian_the_repair_guy]

I usually turn people to watercannon.com for washer parts

[@sunnyp716]

Question on a Titan 840 sprayer I replaced the fuse in control box and it turned on for a bit but then I tried to reconnect it wouldn’t turn on again I assume fuse got blown is this power cord issue? Or could it be something else

[@Brian_the_repair_guy]

If the fuse repeatedly blows, It is usually not the power cord. I would check the switch first. If the switch is OK, replace the fuse and unplug the motor wires from the board. Turn the machine on. If the fuse blows again, the board is bad.
If it blows when the motor is plugged in, then the motor is probably bad. There are other scenarios, bit those are the first 3 to check.