ฝัง
- เผยแพร่เมื่อ 20 เม.ย. 2020
- How To Install Rear Shock Honda CRF250L Rally Suspension Upgrade
In this video I install a YSS brand rear shock in my 2018 Honda CRF250L Rally. At the end of the video i give a quick overview of my initial impressions of the shock. keep in mind this is meant for entertainment purposes only and is based completely on my opinion. If you have any questions please leave a comment below and I will do my best to answer them. Thank you for watching and please consider liking this video and subscribing to my channel!
Below is a link to website I purchased the shock(select your model of crf250l and look for the yss rear shock)
PLEASE NOTE: The rally and normal L model do not have the same shock so be sure you choose the correct one.
bikerzbits.com/honda/crf250/?...
Music:
www.epidemicsound.com/
Subscribe animation credit:
/ @daniel_batal
#hondacrf250l #rally #crf250l - ยานยนต์และพาหนะ
Finally my YSS Dämpfer Einstellbar MZ456-395TR-10-X Honda Crf 250 L 2013-2014 arrives today and will install it tomorrow. Order from Ebay on 27 April and arrives 9 May 2023. It is very costly EUR 362.54 Shipping EUR 55.8 as it comes from UK. I find it cheaper to import from Thailand as Brunei is only 2 hrs away. Where else UK to Brunei is 14hrs 30min.
Your vidoe is very helpful, thanks for the nice content.
I own a CRF300L Rally and I weigh 150 lb and you are correct it still bottoms out. Thanks for the review of the shock. I have heard that YSS shock works well. So I am going to do the same as you as soon as I can.
Truly EXEMPLARY my friend.
No other CRF250L shock installation TH-cam video comes close on level of detail and explanation.
TOP JOB. You deserve way more subscribers.
Thank you! I really enjoy making these videos, hoping to have some more up soon! 🍻🍻
You made this look relatively easy (although I’m sure it was harder especially with the tight spaces). I found your channel on Discord and subscribed. You are very skilled at “how to” videos. Nice job!
V Track thank you! That really means a lot! I try and take my time and be as thorough as possible without being too in depth that it gets boring. Thanks for the sub and for watching! 🍻
Great vid. That YSS shock looks sweet!
When greasing the lower linkages it's best to put the grease actually into the linkage needle bearings. If you put it on the bolt the linkage oil seal will stop it passing into the bearing area.
Keep up the good work 😁
Thank you for watching and the tip! I will definitely re grease it properly and with the right grease. Cheers🍻
Awesome video man , you made it look so easy . I have the Ohlin's with the external reservoir and it was fun installing it . you'll love it once you get the settings just right.
Thank you! I’m looking forward to taking it out this weekend. Just riding around town it feels better already. Just did the race tech front fork kit too. Thanks for watching!
NIce video, more informative than anticipated, now waiting for the RaceTech front forks update video. Great Job.
Thank you! I try to make it so people of any skill level can follow along, but a side effect is that it can sound a little silly sometimes! I’m hoping to have the fork upgrade video done by this time next week. Thanks for watching! 🍻
really useful , thanks for taking the time to do this! subbed / liked
Thank you! I’m glad you liked it. I’ll have the video on the fork spring upgrade out soon as well! Thanks for the support! 🍻🍻
Thanks for this video, it helped me on getting the top bolt loosened. For me it was a little disappointment that this only has rebound adjustment and no compression adjustment, but I am installing is currently and might still be enough for me. I have the same YSS part number as you and as information to those are interested in weight saving, stock one is 3700g and YSS is 2800g, so this is helping 900g (~2 pounds) in weight loss.
Thank you for watching! I’m glad you weighed the yss shock and compared it to the oem one, I was curious after I installed it how much the weight difference was, now I know!
Got it did it love it
Good to hear!
Very well done. Thanks
Thank you for watching!🍻
Hi, useful and informative thanks. Was trying to get the shock of my 250L and had the issues with access from the battery side, didn't consider using the spanner as you have suggested, will have to go back and give it another go. Although I'm now wondering if it's even worth trying to adjust the OEM shock and should just go right ahead and purchase an upgrade.
I’m 190 ish pounds and after I adjusted the factory shock to its maximum level I saw very little improvement. I can’t recommend this yss shock enough, I’ll be posting a full review video on it soon. If you have the spending money I definitely recommend just replacing it.
Nice Shock.
Thank you! It was a very welcomed addition to the bike. Thanks for watching! 🍻
Dude, that looked easy as pie. Why haven't I done this yet?? Thanks for the vid.
Nice place to park a boat. LOL
Critter_moto Thank you! it really is not bad at all. I can tell you right now this, combined with the fork kit I got is and will always be one of the best add one I have done, the bike feels amazing! Haha yeah someone just decided to get rid of their boat I guess. You couldn’t see it on my face but I was pretty taken back buy it!
Stag Adv guess it’s time for me to start saving some pennies. 👍🏻🤣
Critter_moto It’s cheaper than the Ohlins at least haha! If you need any links or anything let me know! 🍻
Stag Adv cheers
Critter_moto not sure what the best option is for us in Canada?
Great video. Have you upgraded the front? I’m about to upgrade my Rally. The rear is way too soft off road
Thank you! Yes I put the race tech front spring kit in mine, I have an install video on that as well. Agreed, suspension on this bike needed a serious upgrade!
You have to get rid of the whale tail! Haha. I did the yoshimura. I like your bike stand. I thought about making one but the bike is so heavy,
I just use my car jack with a piece of plywood as a base
It’s on my list haha! I hate it! I got really bored one day and decided to make the stand, so far it’s holding up ok. I’ve heard good things about the yoshi! How are you liking it?
@@StagAdv I like the styling. It uses the stock turn signals. Some of them have turn signals built into the brake light which I think is not very good. I can't image how that is even legal. The wiring you have to do yourself on the Yoshimura but its simple.
Check out the seat concepts comfort seat for that bike I have it it is incredibly comfortable
I’ve looked into it a little bit but I just can’t do it haha. The stock seat hasn’t really given me any problems so I can’t justify it to myself just yet. Thank you though!
This is great thanks. Did you ever find the torque settings?
Did you ever find them? Im looking.
@@dingus5067I downloaded the service manual.
Can't seem to find a torque spec for either the upper shock mount bolt, or the two lower link bolts. Anyone have any idea on torque specs for em?
I’m 180lbs and bottom it out on mildly bumpy terrain. Getting the hagon shock soon
Fitting yss today 👍
Sweet! Let me know how you like it! 🍻
@@StagAdv the bike sits alot better. Doesn't look like it's going to fall of the the stand lol. Took it for a quick ride off road. Much stiffer on the back end. Worth the £270 all day 👍👍and 30 mins to fit. The stock shock looks absolute cheap garbage when I removed it
Darren Windle my thoughts exactly! Glad you are happy with it! If you haven’t done anything to the front yet try out the race tech fork spring kit, I can’t say enough good things about it, especially paired with the yss! Have fun and ride safe!🍻🍻
@@StagAdv I changed the front spring. Used a k tech
Hey how did it turn out I’m getting new shocks for my bike rally2020
ok you are about 195 lbs, ill see how far down the spring is (i think the heavier you are the further down it goes)
Can you put up a link to where you purchased the shock from please?
My Friends Not a problem! What year is your bike and is it an L model or a Rally? I want to be sure I give you the correct information.
@@StagAdv
I have a CRF250L and it's a 2018 model.
My Friends this link is for a 2017 so it should be the same as a 2018 250L. To be safe I would email them just to verify. They were very quick to respond when I contacted them. Hope this helps!
bikerzbits.co.th/honda-crf250l-yss-shock-absorbers-mz456-380tr-19.html
Do you happen to know what the torque settings are for the linkage etc.? Thx great video!!
I don’t sorry. I looked for a bit online but couldn’t find anything exact.
I have the same shock and same bike I’m 5-10. 200 pounds is the preload spring good with the factory setting?
I’m not sure, I had the manufacturer set the preload for my weight when I ordered it so I never actually experienced it in its stock setting.
I’m a similar weight. Which spring rate did you go with?
I’m not sure what it is set to honestly, I had it adjusted by the factory when I ordered it, sorry!
Do you want to ride Blackwater Sunday around 10 am ?
This bikes 10 times better with suspension but I was being cheap and did the front suspension but just put washers under the rear shock, when are you going to come to NC so I can take you up the mountain
I’ve heard the washer trick works good for what it is! I had thought about doing it but i saw this as an opportunity not only to upgrade the bike but maybe provide more information on the yss. Hopefully I can get it on some terrain tomorrow! I was going on a trip to Alabama to the pinhoti trail but covid -19 put a stop to that, hopefully one day when I get some time I can make it up to the NC mountains! I plan on hitting the mountains in Colorado next year for sure! Thanks for watching! 🍻
@@StagAdv yeah I'm sure it's not the same as a fully adjustable shock, but I'm building this a budget woods oriented dual sport so I tried it out. I was planning on going to hatfield mccoy but got canceled. I plan on going to west coast next year and hitting moab with my brother. But take it easy till next time boss
Jackson Davis you too brother! Maybe I’ll see ya out there sometime, ride safe!
Is that shock fully adjustable to fit each person?
It is adjustable, I have not adjusted mine, however when you place your order if you put your weight in the comment section they will adjust it for your weight. Mine came adjusted for my weight and I liked it so I haven’t messed with it at all.
Do you know what the torque was for the suspension bolts or did you just do it by hand thank u!!!
allan Shuben No problem! I looked but couldn’t find a torque value so I just did it by hand, I’m kind of paranoid about these things so after a bit of riding I rechecked everything.
How much was the YSS Shock?????
I believe it was under $400 shipped from biker bitz
What model number is the shock
Hi, the model number for this shock is MZ456-420TRL-05-85
You didn’t show the hardest part.
Still sagged alot hmm
I was thinking the same thing when I was making this video but it does feel worlds better and still can be adjusted. Time will tell I guess!