I just got some new key\ remote combos for my new Xterra and the instructions that came with them were COMPLETELY wrong. I had programmed remotes for my old Xterra and Pathfinder a few times and knew the process was much simpler than what the instructions were that came with the new remotes. They wanted me to get in and do all the things that you did up until hitting the new remotes. Thanks to your video you saved me a lot of frustration. Thank you!
Omg I really appreciate you making this video I lost my key remote Kayaking in the ocean.. in 2010 and still haven got one and my vehicle alarm keep going off on its own I have to keep going out to open the door and clock it. Or bring and if it's Annoying to me Just imagine my what's its like for the neighbors I'm in a tide budget and I can't afford to take it in to the shop as a single mother I have to keep disconnecting my battery to stop it from going off. Thank you ones again for your video.
Mine is unlocking on its own when I enter the key in the ignition, it will however enter pairing mode, but when I go to press the key the hazards won’t come on or anything. And yes I HAVE made sure the key fob has a fresh battery. Any help is appreciated
You have to have a locksmith do it. I just called and let the locksmith know when I was coming to be sure he would not be out, and He did it. I ordered the keys from amazon they were under 10 dollars at that time 2 years ago so I ordered two and had the locksmith program them both it cost more, but worth it to have 2 keys,especially when you can’t just drop by anywhere anymore to get a spare car key, unless the car is very old!
You can also take the old key with the transponder and tape it inside the dash close to the lock cylinder, that way you can use multiple keys without the transponder.
When I saw your comment, I felt I had a chance. It worked! My problem is it is still stuck on the immobilizer. I think someone tried to break in and broke a key or something in the door. Thanks for your comment!
Make sure your key is in the right position (two clicks, dash lights come on). I made the mistake of only putting it into the first position and it wouldn't do anything.
Tried this a few times. The best result was if I had the key on the ACC mode the fobs would work. Otherwise no luck! Will keep trying but not having a lot of hope. Even the old fob that was working fine isn’t working.
Similar issue for me, my wife started having Issues with her fob and it won’t work unless you’re right at the door, it doesn’t work at a long distance, I even swapped the battery and tried cleaning it, still nothing. It’s only a 2010, I have an 08 and mine is fine . Curious if it’s something else for me
Will not connect to a 2000. Cars computer wouldn’t see the new fobs. Would program the original, so swapped the innards. Old circuit, new plastic. Not perfect, but my fob was in rough shape. Trucks 25 next month.
I get through all the steps (hazards blinking after pressing any button on the new fob, take out key, unlock door, open and close door) but the fob doesn't work after all the steps. Anybody else have this issue?
No matter what I do, I cannot get the hazards to blink. I shut the door, lock it using the driver panel, then insert and re-insert my key over and over. I tried taking it all the way out. I tried not taking it all the way out. I tried endlessly. All my doors shut and lock correctly. NO idea what I'm doing wrong.
Try again man sometimes your not fast enough or your too slow. It took me about 5 minutes , also sometimes the signals don’t work too well so sometimes u need to keep trying
Why does everyone use the ORIGINAL keyfob when you show new keyfobs in beginning of video? Just program the NEW unprogrammed fob already, its clear the old one will work even if this us all just BS 👎🏼
I just got some new key\ remote combos for my new Xterra and the instructions that came with them were COMPLETELY wrong. I had programmed remotes for my old Xterra and Pathfinder a few times and knew the process was much simpler than what the instructions were that came with the new remotes. They wanted me to get in and do all the things that you did up until hitting the new remotes. Thanks to your video you saved me a lot of frustration. Thank you!
Perfect! Two days of trying to figure it out and TH-camrs.
Thank you, Sir! I had to reprogram my second key fob after getting my Xterra computer replaced. This worked like a charm!
Thanks for the short, succinct video! It worked immediately for two new fobs!
Great video. Worked perfectly. Thank you.
I don’t like or subscribe to many, but this saved me a ton of money so I had to
Worked on my 2012 Xterra. Thank you! Mine also wouldn't complete until I opened and closed the door.
Omg I really appreciate you making this video I lost my key remote Kayaking in the ocean.. in 2010 and still haven got one and my vehicle alarm keep going off on its own I have to keep going out to open the door and clock it. Or bring and if it's Annoying to me Just imagine my what's its like for the neighbors I'm in a tide budget and I can't afford to take it in to the shop as a single mother I have to keep disconnecting my battery to stop it from going off. Thank you ones again for your video.
Mine is unlocking on its own when I enter the key in the ignition, it will however enter pairing mode, but when I go to press the key the hazards won’t come on or anything. And yes I HAVE made sure the key fob has a fresh battery. Any help is appreciated
Awesome thank you it worked.
Worked great thank you
How do you program the key after you have it cut?
You have to have a locksmith do it. I just called and let the locksmith know when I was coming to be sure he would not be out, and He did it. I ordered the keys from amazon they were under 10 dollars at that time 2 years ago so I ordered two and had the locksmith program them both it cost more, but worth it to have 2 keys,especially when you can’t just drop by anywhere anymore to get a spare car key, unless the car is very old!
You can also take the old key with the transponder and tape it inside the dash close to the lock cylinder, that way you can use multiple keys without the transponder.
Thank you with your instructions it worked the first time😊😊😊
Outstanding, thank you so, so much for this video...really helpful and clear.
Thanks for the informative video. I just did couple of my new keys. It worked.
Perfect! I follow you every step of the way. Thank you. 👍🏽
Perfect instructions spot on easily reprogrammed my 2007 X after replacing battery. Thanks!
When I saw your comment, I felt I had a chance. It worked! My problem is it is still stuck on the immobilizer. I think someone tried to break in and broke a key or something in the door.
Thanks for your comment!
I can’t get mine to go into program mode. Any suggestions?
Mine neither 😢
Make sure your key is in the right position (two clicks, dash lights come on). I made the mistake of only putting it into the first position and it wouldn't do anything.
Thanks 😅 you’re a life saver
Ty❤
SUPERB, It worked perfectly.. Thanks and keep up the good work..
Great to hear. Pretty easy procedure once you know the secret code
Thank you! Worked like a charm!
Tried this a few times. The best result was if I had the key on the ACC mode the fobs would work. Otherwise no luck! Will keep trying but not having a lot of hope. Even the old fob that was working fine isn’t working.
Followed his directions exactly and worked just fine for me.
Similar issue for me, my wife started having Issues with her fob and it won’t work unless you’re right at the door, it doesn’t work at a long distance, I even swapped the battery and tried cleaning it, still nothing. It’s only a 2010, I have an 08 and mine is fine . Curious if it’s something else for me
Thank you for posting this video!
No problem, I hope we were able to make the job a little easier for you.
When I pull the key out the first time the doors unlock and the flashers never activate.
I have the same problem ☹️
Don't remember now how I solved it, sorry. @@toolzshed
Very helpful thank you
Great to hear. Thanks so much for watching.
So my driver door doesn’t unlock all the way, when I try to unlock all the doors. Would this programming the key fob fix that?
Does the xterra turn on without the key fob?
It will turn on as long as you have the key with the transponder. All the remote fob does is lock and unlock the vehicle.
It didn't worked for my 2007 nissan xterra any suggestions?
THANK YOU!
My xterra doesn’t honk when press the unlock on the key fob. Is that a setting that can be changed?
Keep press the unlock and luck together at the same time about 5 - 9 second
Like a charm
Awesome, so useful
thank you
my xteraa won't lock unless i turn the key on first what then?
Why does it happen? Could something be going wrong?
But why does that key light sensor keep blinking??? Is that normal?
Yea
Will not connect to a 2000. Cars computer wouldn’t see the new fobs. Would program the original, so swapped the innards. Old circuit, new plastic.
Not perfect, but my fob was in rough shape. Trucks 25 next month.
I get through all the steps (hazards blinking after pressing any button on the new fob, take out key, unlock door, open and close door) but the fob doesn't work after all the steps. Anybody else have this issue?
Is the key in the 2nd position (on, two clicks)? If you have it in the first position (acc, one click) it won't work, at least it didn't on mine.
Any way to stop the horn from honking when locking? Don’t want to wake my neighbors.
I think its telling u no key fob 😂
In all seriousness tho im not sure why that would happen
I think you hold down the lock and unlock button on the remote for several seconds and it will make it not honk.
I have a 2015 and the Hazzard lights never come on? Help?
Make a copy of your key, I had to do that for mine to work. The original won't get the Hazzards to turn on but my copied key does
Did it ever work? I have a 2012 and when I pull the key out the first time the doors unlock.
Wish I seen this earlier. Nissan told me that they have to go into the car Ecu to program the fob 😤
My flasher didn't go off, but the door unlocked when I moved the key in and out
Worked for only one but not the 2nd one.
I probably should have rolled my window down 0:45 into it
No matter what I do, I cannot get the hazards to blink. I shut the door, lock it using the driver panel, then insert and re-insert my key over and over. I tried taking it all the way out. I tried not taking it all the way out. I tried endlessly. All my doors shut and lock correctly. NO idea what I'm doing wrong.
My 2007 wouldn't complete until I opened and closed door
Good to know. Thanks so much for sharing.
I have a 2003 Xterra and it didn't work, pity
Didn’t work for me
Try again man sometimes your not fast enough or your too slow. It took me about 5 minutes , also sometimes the signals don’t work too well so sometimes u need to keep trying
@@eltaconator I tried a bunch lol it’s programmed but only works super close and I have to press the buttons a bunch
Would this work on a 2000 x terra ?
Idk how I'm doing this wrong its piss simple...
Is your key in the and position (on, 2 clicks, dash lights up)? A lot of people seem to only be putting it in the acc position.
Why does everyone use the ORIGINAL keyfob when you show new keyfobs in beginning of video? Just program the NEW unprogrammed fob already, its clear the old one will work even if this us all just BS 👎🏼
Як шкода що не має перекладу на Українську мову (((((
Thank you
My vehicle won't get out of programming mode. Now I have no key fob working. 😐