Have a good day Mr RY the car guy, i a question about my 2006 Nissan Xterra off-road, every time I start my Xterra there a white smoke came out to the exhaust every morning hopefully you can give me advice please
I have a 2008 Frontier and my key fob works, but it's finicky most of the time, replaced the battery in the fob, but it's still finicky. If I reprogram the key fob like you did in the video will it make it work better?
Hi. I have a question. I replace the clock spring in a nissan xterra 2010, but after I put everything back turn the vehicle on and drive it the dvc and slip lights came on. How can I reset them. Advise please
Very interesting. Thank you. So, theoretical, this method should work for any Nissan cars?! (I just bought a 2023 Nissan Versa S, of which a fob wasn't included.)
I tried this and didn't worked because every time I inserted the key in and out in the ignition, actually unlocked the doors not allowing me to get the hazard lights to flash, any idea why the insertion of the key followed by the removal the doors unluck, I would appreciate any input at this time, thank you.
My Xterra did the exact same thing. You have to first turn off the Automatic Door Lock feature. After doing this it worked exactly as Ry explained. First - Close all doors. 2nd - Place the ignition switch to the ON position. 3rd - Within 20 seconds push and hold the power door switch in the UNLOCK position for more than 5 seconds. When the hazard indicators flash twice the feature is deactivated. Remove the key and then try Ry's procedure. After you're done programming your remote if you want to re-enble the Auto Door Locks just do that same procedure above to re-activate it. You can find this information in the Owners Manual in the Door Locks section. On my 2013 Xterra manual it is on page 3-4.
Hello! I really need your help ASAP. We changed timing chain, then when we started engine, it worked rough, and code p0300 appeared, and nothing else. Is that a problem of timing chain or something else, repair station cannot find the reason of the problem?
That very well could be the timing. Especially if it's not telling you a specific cylinder. Be sure to check at the spark plugs and coil packs. Ensure the coils are all pushed down nice and tight on the plugs and that all the connections are snapped into the coils
im not having any luck with an 07 infiniti g35. its a key/fob combo and the key isnt cut. but even with the original cut and working key it never enters programming mode.
@@Rythecarguy I have power locks. I followed your amazon link for some fobs. "You should have an antenna for a remote"? Not sure what your saying. If I have power locks then I have an antenna OR if I am going to do this I will need power locks and to purchase FOBS and an antenna.
What if there's no ignition and you have an Infiniti, not a Nissan.😢 Edit: I got to the step where the hazards are flashing with the red car with the key in the dashboard was also flashing. I put it in accessory mode but the hazards didn't turn off. I couldn't get past this step and I have a Push button. Any help please? 🙏🏾
I bite the bullet cause the Fob was no more than the cost of a burger. It worked I have a Key FOB. Thank you Thank you Thank you. Coffee Black coming your way.
the wire harness where the a/f sensors plug into. I am trying to track all my grounds and have not a solid layout plan for them. 08 x with 270k miles for reference. Installing new sensors and wanting to verify grounds.@@Rythecarguy
the only problem i have now is that the new aftermarket key doesnt disable and enable the horn lock sound n it was shut off by my other aftermarket key n i have no clue what i did bc i followed rhe directions in the owners manual, press and hold unlock and lock button at the same time, n it still doesnt work. key fob locks n unlocks everything like normal just dont know why the horn doesnt work when locking anymore
What? Of course it goes into accessory mode. People have reset a bunch on push button. You just need to learn how to use your car. Do the same procedure I describe but instead of turning the key, press the button. Scroll through the comments. Many people have made it work.
I got mine from amazon for 12 bucks for a pair 3 years ago, still works, havent had to change the battery yet
🤟🏻🤟🏻
Thanks!
Mann, thanks 1 million this was very very helpful. Keep up the good work.
Glad it helped!
how do you do this with a push to start?
Great video man. Side note.. Nissan really likes to take it in the ignition hole... 😂😂😂
Yes it does! 😂
Worked perfectly on 2007 Nissan Quest to program 2 new remotes off of Ebay. Thanks!!
Have a good day Mr RY the car guy, i a question about my 2006 Nissan Xterra off-road, every time I start my Xterra there a white smoke came out to the exhaust every morning hopefully you can give me advice please
I have a 2008 Frontier and my key fob works, but it's finicky most of the time, replaced the battery in the fob, but it's still finicky. If I reprogram the key fob like you did in the video will it make it work better?
Super easy! Awesome video!
Hi. I have a question. I replace the clock spring in a nissan xterra 2010, but after I put everything back turn the vehicle on and drive it the dvc and slip lights came on. How can I reset them. Advise please
0:50 Xterra 9 months later 🤰👨👩👦
🤣😂
Very interesting. Thank you. So, theoretical, this method should work for any Nissan cars?! (I just bought a 2023 Nissan Versa S, of which a fob wasn't included.)
did you ever program a key fob? i also just a bought a versa with a fob not included
I have Altima 2008 new fob from Amazon, will this work?
I tried this and didn't worked because every time I inserted the key in and out in the ignition, actually unlocked the doors not allowing me to get the hazard lights to flash, any idea why the insertion of the key followed by the removal the doors unluck, I would appreciate any input at this time, thank you.
My Xterra did the exact same thing. You have to first turn off the Automatic Door Lock feature. After doing this it worked exactly as Ry explained. First - Close all doors. 2nd - Place the ignition switch to the ON position. 3rd - Within 20 seconds push and hold the power door switch in the UNLOCK position for more than 5 seconds. When the hazard indicators flash twice the feature is deactivated. Remove the key and then try Ry's procedure. After you're done programming your remote if you want to re-enble the Auto Door Locks just do that same procedure above to re-activate it. You can find this information in the Owners Manual in the Door Locks section. On my 2013 Xterra manual it is on page 3-4.
Hello! I really need your help ASAP. We changed timing chain, then when we started engine, it worked rough, and code p0300 appeared, and nothing else. Is that a problem of timing chain or something else, repair station cannot find the reason of the problem?
That very well could be the timing. Especially if it's not telling you a specific cylinder. Be sure to check at the spark plugs and coil packs. Ensure the coils are all pushed down nice and tight on the plugs and that all the connections are snapped into the coils
That is true bro I'm by six dollars that key on Amazon. I am reprogrammed which way you explain is working now I have two key
What am I doing wrong , everything is closed . But it won’t flash the hazards 😊
Did you ever figure it out?
im not having any luck with an 07 infiniti g35. its a key/fob combo and the key isnt cut. but even with the original cut and working key it never enters programming mode.
How do I clear programmed fobs? I have two Xterra’s and programmed both fobs to both vehicles. My wife HATES it.
Nissan versa 2020 I need a new fob how to program it
I have a 2010 Xterra S. Does it have the ability to work with a key fob?
If you have power locks then yes. You should have an antenna for a remote.
@@Rythecarguy I have power locks. I followed your amazon link for some fobs. "You should have an antenna for a remote"? Not sure what your saying. If I have power locks then I have an antenna OR if I am going to do this I will need power locks and to purchase FOBS and an antenna.
Worked on my 2005 Xterra. Thanks
You're welcome!!
Thank you for your help once again 👊
Happy to help!
Anyone know if there's a way to program an Xterra to unlock all doors on the first press of the key fob, rather than having to press it twice?
What if there's no ignition and you have an Infiniti, not a Nissan.😢
Edit: I got to the step where the hazards are flashing with the red car with the key in the dashboard was also flashing. I put it in accessory mode but the hazards didn't turn off. I couldn't get past this step and I have a Push button. Any help please? 🙏🏾
RY you're awesome
Thank you! I really appreciate it.
My infinity’s key fob locks and unlocks but it won’t let me turn the key AT ALL, accessory, on, etc.
Is it a new key?
@@Rythecarguy no I’ve had it for about 3 years, it’s happened before but it randomly turned on a few days later
Fantastic!!
Thank you! Cheers!
I bite the bullet cause the Fob was no more than the cost of a burger. It worked I have a Key FOB. Thank you Thank you Thank you. Coffee Black coming your way.
how do you find grounds?
For what? Where do you mean?
the wire harness where the a/f sensors plug into. I am trying to track all my grounds and have not a solid layout plan for them. 08 x with 270k miles for reference. Installing new sensors and wanting to verify grounds.@@Rythecarguy
Will do
👍🏻👍🏻
So are you using your original key because obviously, the new key with the new fob is not working to turn the ignition
The fobs are separate from the keys
works on my nissan altima 2006👍
the only problem i have now is that the new aftermarket key doesnt disable and enable the horn lock sound n it was shut off by my other aftermarket key n i have no clue what i did bc i followed rhe directions in the owners manual, press and hold unlock and lock button at the same time, n it still doesnt work. key fob locks n unlocks everything like normal just dont know why the horn doesnt work when locking anymore
Cool
Thanks for sharing
100% doesn't work on infiniti !
There's not even a place to insert a key into the infiniti with the start button. How could it even go to accessory mode? Funny
What? Of course it goes into accessory mode. People have reset a bunch on push button. You just need to learn how to use your car. Do the same procedure I describe but instead of turning the key, press the button. Scroll through the comments. Many people have made it work.
Too bad this didn't work for me. I trird 6, 8, and 10 times. Nothing worked.
Thanks!
Wow, thank YOU!