Thank you for posting this video! I just tore mine down and am ready to reassemble. The part that most concerned me was reassembling the shaft to the fork with my big fat hands in that tiny box. It would seem like a no brainer to remove the knob first, but it is probably something I would have fiddled around with for a while before it occurred to me to do that. I have only had the mill 2 months. Again, thank you! Jerry
Kirk, thanks for taking the time to video this! I chewed up the first plastic gear driven by the motor pinion and now I'm looking at mine to see if there is a way to eliminate the hi lo gear and still have the function of the quill. Thanks!
You can increase the spindle speed to around 3000 by just adjusting the speed pots on the board marked Min & Max with a small screwdriver, only takes a few minutes.
For the love of Christ compels us, because we judge thus: that if One died for all, then all died; 15 and He died for all, that those who live should live no longer for themselves, but for Him who died for them and rose again. 16 Therefore, from now on, we regard no one according to the flesh. Even though we have known Christ according to the flesh, yet now we know Him thus no longer. 17 Therefore, if anyone is in Christ, he is a new creation; old things have passed away; behold, all things have become new. 18 Now all things are of God, who has reconciled us to Himself through Jesus Christ, and has given us the ministry of reconciliation, 19 that is, that God was in Christ reconciling the world to Himself, not imputing their trespasses to them, and has committed to us the word of reconciliation. 20 Now then, we are ambassadors for Christ, as though God were pleading through us: we implore you on Christ’s behalf, be reconciled to God. 21 For He made Him who knew no sin to be sin for us, that we might become the righteousness of God in Him. 2 Corinthians 5:14-21
Thank you for posting this video! I just tore mine down and am ready to reassemble. The part that most concerned me was reassembling the shaft to the fork with my big fat hands in that tiny box. It would seem like a no brainer to remove the knob first, but it is probably something I would have fiddled around with for a while before it occurred to me to do that. I have only had the mill 2 months. Again, thank you! Jerry
Kirk, thanks for taking the time to video this! I chewed up the first plastic gear driven by the motor pinion and now I'm looking at mine to see if there is a way to eliminate the hi lo gear and still have the function of the quill. Thanks!
So glad someone documented this!
Thanks for sharing ;)
I'm glad you found it helpful
You can increase the spindle speed to around 3000 by just adjusting the speed pots on the board marked Min & Max with a small screwdriver, only takes a few minutes.
Thank you again ...blessed man
Great job thanx for sharing
Thanks for doing this.
Awesome!
For the love of Christ compels us, because we judge thus: that if One died for all, then all died; 15 and He died for all, that those who live should live no longer for themselves, but for Him who died for them and rose again.
16 Therefore, from now on, we regard no one according to the flesh. Even though we have known Christ according to the flesh, yet now we know Him thus no longer. 17 Therefore, if anyone is in Christ, he is a new creation; old things have passed away; behold, all things have become new. 18 Now all things are of God, who has reconciled us to Himself through Jesus Christ, and has given us the ministry of reconciliation, 19 that is, that God was in Christ reconciling the world to Himself, not imputing their trespasses to them, and has committed to us the word of reconciliation.
20 Now then, we are ambassadors for Christ, as though God were pleading through us: we implore you on Christ’s behalf, be reconciled to God. 21 For He made Him who knew no sin to be sin for us, that we might become the righteousness of God in Him. 2 Corinthians 5:14-21