Nicely put together. I'm looking at a complete rebuild of the guides for the carriage on my press. Too much slop and they continually need re-adjustment.
As a bladesmith, it looks like a dream machine. Only concern I have, is the fact that the base rises up rather than the top coming down. Might be hard to get the proper angle on the iron when the base is moving. Other than that, awesome.
Plans are in progress! Rough material cost is between $1500 and $2000, depending on motor, pump, steel cost, etc. Once everything is finalized, a bill of materials will be included, as well as links to purchase each component 👍🏼
Hell yeah! I'm on Formula SAE for my senior design, and I've been able to spend some time in the machine shop. But I'd love to check it out in the future 👍🏼
Build cost ranges anywhere from $1500 to $3000, depending on motor, steel, etc. Ours was under $1500 because we used scrapyard steel and got a great deal on our motor. For 5hp, it will be easiest to find a 240V motor. If you don't need as much horsepower, it's possible to use 120V, but realistically the entire system will have to be downsized.
![[FULL EP.16] เซียนพาลุย "เผือก-ฟรอยด์" กรี๊ดลั่น จนปูหนี | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/FsqUvwS3b-Y/mqdefault.jpg)
YES!!! Looks like a whole lot of squishing power!
very much looking forward to this series! i've been thinking about building a press, so maybe this will be the kick in the pants i need
Nicely put together. I'm looking at a complete rebuild of the guides for the carriage on my press. Too much slop and they continually need re-adjustment.
As a bladesmith, it looks like a dream machine. Only concern I have, is the fact that the base rises up rather than the top coming down. Might be hard to get the proper angle on the iron when the base is moving. Other than that, awesome.
Nice piece of gear!!!!!!
Very good video thanks you
Are you doing a series on this build?
Yup! Next one will include fabrication 👍🏼
i love the Rio Linda comment ... dog whistle to Rush fans
I’m interested in your plans, will there be a materials cost to?
Plans are in progress! Rough material cost is between $1500 and $2000, depending on motor, pump, steel cost, etc. Once everything is finalized, a bill of materials will be included, as well as links to purchase each component 👍🏼
Airborne Productions thanks
Are you a Cal State Fullerton Alumni? I noticed your shirt.
Good eye! Going into my senior year
@@FormulaJake Awesome. You gotta check out the local Fullerton Hackerspace sometime, once everything settles down.
Hell yeah! I'm on Formula SAE for my senior design, and I've been able to spend some time in the machine shop. But I'd love to check it out in the future 👍🏼
What the estimated build cost, and does the electric motor have to be 240v or 120v?
Build cost ranges anywhere from $1500 to $3000, depending on motor, steel, etc. Ours was under $1500 because we used scrapyard steel and got a great deal on our motor.
For 5hp, it will be easiest to find a 240V motor. If you don't need as much horsepower, it's possible to use 120V, but realistically the entire system will have to be downsized.
How much to build one and ship to ohio
Are the plans available now?
Yes they are!
www.etsy.com/AirborneProduction/listing/858775510/24-ton-hydraulic-press-build?Copy&ListingManager&Share&.lmsm&share_time=1600503579870
I'll take 20
Rio linda haha man They have their own special language over there I still can’t understand what the hell they’re saying half the time