VW / Audi 2.0 TSI intake update and valve cleaning!

This video I go through the cleaning process I use to clean carboned up intake valves! I also show a time-lapse of replacing the intake manifold with updated intake!
Follow OE service manual and replace required hardware and seals. Wear proper safety gear.

[@GuyBucktastik]

Thanks! 2.0t is a great engine to work on, because it always needs somethin!
Vdubs look nice up in sconsin

[@RedEyedJedi]

I've been thinking you must be able to use premium petrol to clean these valves and you are the first person to confirm this can be done. Thank you.

[@paulfoldes3873]

when you where showing fuel injectors assembly of nylon rings it would help if you would explain using special tools you using thank you

[@cityneckmediallc]

Thank you for your feedback. I will definitely take that into consideration on the next one.
Thank you

[@JJJobson]

I’m assuming if you use break cleaner it will desolve eliminating any hydro lock concerns right?

[@cityneckmediallc]

It's just generally not as effective. Also if u use it in a spray can it can create a mess.

[@JJJobson]

@@cityneckmediallc thanks

[@jakub.686]

i have a loud whistle up to 5 seconds after my cold engine started, what maybe the cause? crank case went? 1.8 tfsi CDAA

[@cityneckmediallc]

Definitely sound like a crankcasevent/oil separator! I touch on this at the 7:47 mark in the video. Quick diag - Have your hood open and engine cover off. Start it up, and if u hear the noise, find the vent/separator on the top of the engine and temporarily plug the hole on the side of the round part of the vent/separator. If the noise is gone, then ur vent/separator diaphragm has failed. The diaphragm is sold as a separate part, but I suggest replacing the whole unit, and I would look into if you have other issues that are causing the failure.
*take advice and perform at your own risk*

[@jakub.686]

@@cityneckmediallc it's not happening every time. But if it happened I will try as you said. Thanks for your response!

[@paulfoldes3873]

go faster so nobody can see what you doing

[@cityneckmediallc]

I assume you are talking about the removal of intake part. I apologize that it's not to your liking, but I didn't intend it to be a step by step tutorial on how to remove the intake. I wanted to focus on the actual cleaning tips and tricks.