How to replace shutter in Canon 50d Timelapse

Canon 50d camera teardown. See the whole camera disassembling process. I only replaced the shutter blades, not the whole shutter. Bought from AliExpress.com for only $ 8.49 The camera worked perfectly afterwards. Filmed with Panasonic Lumix FZ200.

[@finkleart]

Thanks. You have convinced me that I'd never get it back together.

[@maxfactor4209]

lol

[@denispol79]

Pay attention that the sensor assembly is factory adjusted by springed screws.
They are not necessarily screwed to the end. You should adjust them back after the partial assembly, and that's not easy.
Otherwise the sensor won't sit parallel with the focal plane.
Maybe you should count how many screw revolutions is there on each of them till they are tight before taking the sensor apart.

[@maxfactor4209]

so conclusion is dont u ever think about it

[@finkleart]

I found an almost new 50D on ebay, for $215, including shipping

[@indigobaloon8091]

A nightmare.

[@ivanpolak9578]

Friend, I did everything according to your video. I have a problem replacing the slats. The video does not show exactly how to do it. Can you help me.
These are spring settings. Excuse my English.

[@brendonstanley437]

Great Video , makes it easy to see what you are doing, thanks for sharing it ..... Will replacing the shutter blades on the 50D possibly fix "ERROR 20" shooting is not possible due to an error...?

[@harrystevens3885]

Another reason to keep my film cameras....My Rolleis are 60 years old and the shutters are still going strong...

[@ImJeeb]

Thanks man, helped a lot, I change the shutter part without the motor. Found the shutter on Aliexpress and it solve the error. Missing the reassembly ^^

[@chsbadsly]

By chance do you remember where the fpc for the shutter goes? I'm losing my mind I forgot to take note of where it goes

[@solosoulet]

no screw left unturned... jeez...

[@marenke5337]

Thanks, it worked for my EOS 50D . 7:34 that sensor screw is the key of focusing adjustment.

[@marcthomas9831]

MA RENKE No one ever covers the importance of that when taking the camera apart! Do you know of any tutorials on what to do?

[@flashbackproducciones3713]

excelente

[@egilamundsen5426]

Amazing

[@pixelspotmedia9046]

Hello, thanks for the movie, can you tell me which screwdriver u used, i can't find
such small screwdrivers in my neighbourhood, PH0 is the smallest I can find....

[@peavyteborge]

Hello, I used screwdriver PH00.

[@pixelspotmedia9046]

Thanks for your reply :-)

[@pixelspotmedia9046]

That's correct, i have already changed the shutter, only one thing i forget, when i removed the sensor, i forgot to count the rotations of the sensor screws, but in you film i saw your notes :-) now it's ok again, thanks man !!! I saved my 50D..... a super camera....i still love it, better than my 650D......