I straight up used J-B Weld with steel reinforcement to bond it. I took off the 3M tape before and after that my door handle cover didn’t move like yours did. I had to remove them to sand them and wash them before bonding them. I wrapped the button in carbon fiber wrap though so it wasn’t bare. Also wrapped the back of the handle since that never gets damaged.
Looking to get a white 370z. They look very nice and this along with some nice black alloys will top it off, assuming the windows are already tinted dark.
@Adam Galindo I just put the honeycomb carbon fiber on my z yesterday. The passenger side went smooth, but the driver side handle was just too tight of a fit. But Overall, it looks nice so I'm satisfied
Thanks man! Scratches aren’t too bad but fitment is still kinda annoying and is almost falling off. Definitely go with EvoR carbon fiber handles instead of carbon alliance though
They’re holding up fine. Haven’t gotten worse but I think I would still recommend people get them from EvoR instead since I’ve heard those don’t have problems
@@adamgalindo shave off what rubs with 600 grit sandpaper, but hit up alliance carbon in the email, tell him they don’t fit good, that you’ve had a problem since day one, send him your order # he’ll send you a new pair, i got a brand new pair waiting for me when these ones go bad
Not a fan at all of aluminum either. I would not dish $250 for CF. Not a fan of stickers (no matter how "light weight" they are, they are stickers). I am looking for a better solution to black out my 2018 Z Nismo. Anyone?
Fyi alliance carbon door handles have seem to have gotten a bad rep for that fitment you pointed out when opening the door. I see tons and tons of complaints on Z groups on Facebook complaining the door handles don’t fit how they should for the price point. Also some people talking about how they had to shave down the handle to fit properly. Alliance carbon was a really good company when they started, but again in a lot of Z groups everyone has come to the conclusion the company has gone down hill.
@@adamgalindo from my understanding everyone wanted alliance door handles because they came with the key hole… but then were let down by the poor fitment & modification needed to fit properly and not scrape. I see most people recommend evo-r door handles for far better fitment, unfortunately just no key hole.
![How to Make a Carbon Fiber Door Panel 370Z [DIY] (Carbon Fiber Skinning)](http://i.ytimg.com/vi/oThwzsywC5U/mqdefault.jpg)
![How to Make a Carbon Fiber Door Panel 370Z [DIY] (Carbon Fiber Skinning)](/img/tr.png)
What do you think of the new addition?
Looks clean bro
I straight up used J-B Weld with steel reinforcement to bond it. I took off the 3M tape before and after that my door handle cover didn’t move like yours did. I had to remove them to sand them and wash them before bonding them. I wrapped the button in carbon fiber wrap though so it wasn’t bare. Also wrapped the back of the handle since that never gets damaged.
Woah that’s a good idea actually, was it hard to do?
Looking to get a white 370z. They look very nice and this along with some nice black alloys will top it off, assuming the windows are already tinted dark.
Yup white looks so good on Zs 👌
I had the same issue with my driver side door. But your z looks nice with the new handles man
Thanks man! Yea it’s a little annoying but not a big deal
@Adam Galindo I just put the honeycomb carbon fiber on my z yesterday. The passenger side went smooth, but the driver side handle was just too tight of a fit. But Overall, it looks nice so I'm satisfied
Those look pretty good, a better option might be a carbon wrap for the hamdles. It would have better coverage ,.Good looking car though.
Hey man great video, I was wondering how are the scratches holding up now? Have they turned into big noticeable scratches over all this time?
Thanks man! Scratches aren’t too bad but fitment is still kinda annoying and is almost falling off. Definitely go with EvoR carbon fiber handles instead of carbon alliance though
I went with evo r for door handles then alliances carbon side mirror cap
Wow they look nice.
Thanks man! 🙏
Hey how are they holding up? Are the fitment issues still as bad as they were or getting better?
They’re holding up fine. Haven’t gotten worse but I think I would still recommend people get them from EvoR instead since I’ve heard those don’t have problems
way to go bro
I wish they had pearl white ones
That would be sick
You should paint the button black
Same happened to me, had to sand down where it needed just so it opens, mine was so bad that my door didn’t even open
Yea mine sometimes gets a little stuck and have to open it carefully otherwise I’ll break the carbon. Definitely don’t see them lasting much longer
@@adamgalindo shave off what rubs with 600 grit sandpaper, but hit up alliance carbon in the email, tell him they don’t fit good, that you’ve had a problem since day one, send him your order # he’ll send you a new pair, i got a brand new pair waiting for me when these ones go bad
Nice I’ll try that out thanks
Where did you get the front bumper emblem?
Here: www.thezstore.com/page/TZS/PROD/370z03b/31-1164
They also have the rear emblem, should be suggested below on the site
sheezzz clean!
Thanks man 🙏
how long does it take to arrive?
Took about a month
@@adamgalindo thank you
What year?
2015
Not a fan at all of aluminum either. I would not dish $250 for CF. Not a fan of stickers (no matter how "light weight" they are, they are stickers). I am looking for a better solution to black out my 2018 Z Nismo. Anyone?
That’s your only solution. Or paint them but they’ll chip eventually
Who else sells some good carbon fiber doorhandles covers I have a 2010 370z and I have been looking for a set
Evo R sells carbon handles as well, seems I should’ve went with them instead
I got evo r door handles they fit perfect
Fyi alliance carbon door handles have seem to have gotten a bad rep for that fitment you pointed out when opening the door. I see tons and tons of complaints on Z groups on Facebook complaining the door handles don’t fit how they should for the price point. Also some people talking about how they had to shave down the handle to fit properly.
Alliance carbon was a really good company when they started, but again in a lot of Z groups everyone has come to the conclusion the company has gone down hill.
Damn that’s a shame, probably should’ve done some more research before
@@adamgalindo from my understanding everyone wanted alliance door handles because they came with the key hole… but then were let down by the poor fitment & modification needed to fit properly and not scrape. I see most people recommend evo-r door handles for far better fitment, unfortunately just no key hole.
Liked them until the end of your paying that much for something so small you would expect it to be a good fit
Yea unfortunately just went with the wrong company. EvoR makes the exact same thing for the same price and have heard that those fit perfect
Time to shoot!!! Haha
Yup soon!
Bro 220 plus 5 weeks of arrival fuck no 😂
Tbh evo r dont have that problem these u got will fall off
Hopefully not, we’ll see 🤷🏻♂️
That does not look durable at all.
Yup they didn’t last, had them removed already