Love your work, but as others have said the drains need traps and the whole drainage system needs venting to meet plumbing codes and operate correctly.
Watch out Balkan, I can hear the angry engineers on their way here from the Mechanical ducting demonstration! Still, good on you for exploring the full potential of Revit - definitely gives us more appreciation for how our engineers work! I assume we're likely to see electrical and fire services next as well to cover all the bases?
Well if there is enough interest in those topics I will make courses on those topics 🙂 Regarding the comment about the angry engineers, yeah I know, but I'm just trying to show Revit features, I'm not teaching plumbing
@@balkanarchitect Well, I was going to post an angry comment, but honestly I love your content! You and Aussie Bim Guru are my Favorite Revit Guys on TH-cam. I've learned so much from the both of you. I hope to do some collaboration with both of you. I think it would be great to design a building together and show how expert revit users can really change the game when it comes to Modeling in Revit. Hopefully we can show the community good collaboration between Architect and Engineer. I'm focusing on Plumbing videos right now, but will be doing some mechanical and Electrical videos in the future. Love you guys! Just remember, don't forget those vent pipes!
I was doing some research on the top ranking plumbing videos and Balkan (as expected) has the top 4 videos on plumbing. I was going to make a comment on the design, except I found your little conversation. You were spot on lol. But I'm holding back because I really respect both of you. I think its really good that both Architects and Engineers learn the others trades since we all work in the same model. It's insane that most engineers and mep designers have never drawn a wall in Revit and vice versa. But, I think with youtube we can really start to help the community. Hope to collaborate with both you guys in the future! A side note your family video where you create the duct hanger was insane. I was completely blown away how fast you were able to put that together. Keep up the good work!
@@mep_guy cheers! On the one hand I also sometimes question the subject matter and suitability of topic/presenter given experience, but at the same time it's a shame there aren't similarly dedicated MEP BIMtubers out there working at the same frequency/duration of upload I guess. Looks like you're working on changing that though!
If they are not face based, you can just go in an elevation or a section and move them up, if they are reference plane based then you will need to create a reference plane at a specific height and place your component on that ref. plane. :)
hello Agustin Dey, this is Aman from Balkan Architect tutor videos follow, Can I get drawing done with Revit, so i could do the plumbing with Revit software ? You see I'm a starter from scratch. Thank you
Yeah, ideally those would be a part of the Plumbing fixture, in this case some of the families I used didn't have them. If you want to include them I suggest searching specifically for a family that contains that. :)
Hi, thank you for your suggestion, I'm a bit sort on time, but in less then a month I will be finishing my master thesis project, and then I will be working on expanding to udemy and my own learning website. :)
This not McDonald's and you don't get it, are have it your way. Plumbers have to install plumbing to local code.. Read a code book about plumbing before installing a sanitary system.
I love how genuine you want your viewers to learn Revit! Keep it up man! 👍😊
Provided his viewers can afford revit. I'm watching this to learn about plumbing and apply it to sketchup.
th-cam.com/video/_3rhFv0rUlE/w-d-xo.html&feature=share
I want to be part of your training
Je suis du Congo, je te suis depuis plus d'un et je maitrise tes tutoriels par cœur. Grâce à toi je maitrise gratuitement revit et je t'en remercie.
Love your work, but as others have said the drains need traps and the whole drainage system needs venting to meet plumbing codes and operate correctly.
Thanks a ton Balkan!
Happy to finally see you
Watch out Balkan, I can hear the angry engineers on their way here from the Mechanical ducting demonstration!
Still, good on you for exploring the full potential of Revit - definitely gives us more appreciation for how our engineers work!
I assume we're likely to see electrical and fire services next as well to cover all the bases?
Well if there is enough interest in those topics I will make courses on those topics 🙂
Regarding the comment about the angry engineers, yeah I know, but I'm just trying to show Revit features, I'm not teaching plumbing
@@balkanarchitect keep it up 👍
@@balkanarchitect Well, I was going to post an angry comment, but honestly I love your content! You and Aussie Bim Guru are my Favorite Revit Guys on TH-cam. I've learned so much from the both of you. I hope to do some collaboration with both of you. I think it would be great to design a building together and show how expert revit users can really change the game when it comes to Modeling in Revit. Hopefully we can show the community good collaboration between Architect and Engineer. I'm focusing on Plumbing videos right now, but will be doing some mechanical and Electrical videos in the future. Love you guys! Just remember, don't forget those vent pipes!
I was doing some research on the top ranking plumbing videos and Balkan (as expected) has the top 4 videos on plumbing. I was going to make a comment on the design, except I found your little conversation. You were spot on lol. But I'm holding back because I really respect both of you. I think its really good that both Architects and Engineers learn the others trades since we all work in the same model. It's insane that most engineers and mep designers have never drawn a wall in Revit and vice versa. But, I think with youtube we can really start to help the community. Hope to collaborate with both you guys in the future! A side note your family video where you create the duct hanger was insane. I was completely blown away how fast you were able to put that together. Keep up the good work!
@@mep_guy cheers! On the one hand I also sometimes question the subject matter and suitability of topic/presenter given experience, but at the same time it's a shame there aren't similarly dedicated MEP BIMtubers out there working at the same frequency/duration of upload I guess. Looks like you're working on changing that though!
good job man. first time learning this software Revit. I've been using chief Architect
Your instructions are great. Love your vide and learn much. Keep up the good work!
Good video, should indicate the waste p-traps for the sinks and plumbing vents for the sink p-traps and watercloset.
Pretty cool overview. Ideally you would have P-traps though.
Thank you , klass 😊👍
Hi balkan thanks for your videos it helps a lot!!
I’m going to be dealing with air handlers chillers chill water piping condenser piping do you have a starters class involving those
Thanks a lot Sir. I always follow your tutorials.
Director u better finish the project here ooo
No p trap on the sink and vent branch.still nice tutorial.God bless
thank you balkan but i can't access to your video course in patreon
Just sign up on my Patreon page, and if you have any questions/issues for accessing courses, you can contact me there. 🙂
Hey how can I practice it over my laptop
I like ur tutorial
I don't know anything about plumbing but I want learn from you what can I do?
its great! but there is no vent pipe in waste line.
Hello Sir, could I please have the exercise file
I am a premium member in your patreon and couldn't reach the project files. How can I find them please?
If its possible can you do a course on it pleease??
Thank you man
I like you
From Yemen
😘
how do i find this house and files , i went to your patron but don't see how to find it ?
You have full course
Please tell
How to put support on pipe.
Also how to create new type of pipe support.
Why there is no P-traps?
Hello I have one question for you
How to Revit components object move in vertical. like bed, table, sofa
If they are not face based, you can just go in an elevation or a section and move them up, if they are reference plane based then you will need to create a reference plane at a specific height and place your component on that ref. plane. :)
Hi , how can I access to this tutorial , please let me know how can I pay for it and how much is thank
How to avoid color over piping in Rivet?
i just wonder why the sewer layout there is no Vent thru roof pipe
Hi sir I would like to ask ,I have new job I would like to ask how to start mep in revit with a large building, please help me for plumbing
Venting of all fixtures even floor drains are important , vent fixtures next time
I'm looking forward to check your tutorial
Where are all the plumbing vent?????
Can i share to LinkedIn
Thanks for the video. Someone know an independent software to do plumbing design, without using Revit. Thanks in advance!
Can we do the modelling of a septic tank in revit??
i need the water heater family can any body send web site to download it ???
terima kasih daripada haziq, pelajar politeknik PSIS
You are the best! Could you guide me on how to make overhead pipes show with dashed lines to differentiate from underground..
hello Agustin Dey, this is Aman from Balkan Architect tutor videos follow, Can I get drawing done with Revit, so i could do the plumbing with Revit software ?
You see I'm a starter from scratch. Thank you
Please keep a course for how to fix lighting in Revit with detail
Hi Mr balkan;
just from startx looking at your tutorials...its interesting. I'm new and don't know how to access to your video course!!
its interesting. I'm new and don't know how to access to your video course!!
Where Are The Cleanouts
your screen area is big pls small them the layout is hidden
Can you upload these courses on more popular platform where we can buy it , platforms like udemy, linda, etc
I will be uploading to udemy soon! :)
@@balkanarchitect Thanks so much!!!
So nice and Thanks. But You always start from beginner and always left on Beginner. Please go upto advance. Thanks
good
Hi my friend plz you can Help me to know plumbing well plz
Pozdrav, da li mi mozes opisati svoje iskustvo sa Arhitektonskim fakultetom?
Pozdrav, uskoro ce biti video u kome opisujem proces master teze i projekta, a kasnije i o diplomiranju i celokupnom iskustvu 🙂
@@balkanarchitect Hvala, ja sada zavrsavam 8. razred i upisujem srednju arhitektonsku (Vojislava Ilica) :)
can you help me
Please teach mass too.thanks
No vents
Je veux apprend
THE PLUMBING NOT DOING AUTO ROUTING
Hmm, your sinks and drains don't show any P-Traps.
Yeah, ideally those would be a part of the Plumbing fixture, in this case some of the families I used didn't have them. If you want to include them I suggest searching specifically for a family that contains that. :)
This guy is not a licensed plumber and has not put any p-traps in his drainage system. VERY DANGEROUS!!!!!!! ELEMENTARY, And Basic plumbing.
Please use udemy.
I want you on udemy
Hi, thank you for your suggestion, I'm a bit sort on time, but in less then a month I will be finishing my master thesis project, and then I will be working on expanding to udemy and my own learning website. :)
@@balkanarchitect Great, thanks alot sir.
Who much the course
All new video chhoda ji
Too much ads
So many plumbing code violations, not a single vent.
It's wrong
This not McDonald's and you don't get it, are have it your way. Plumbers have to install plumbing to local code.. Read a code book about plumbing before installing a sanitary system.
Does not help at all !
የመላጣ ልጅ