I find it quite interesting that you made a point to accentuate the importance of installing the handguard on the throttle side correctly a multiplicity of times. Only to then totally disregard the installation process, as well as the installation method used, when installing the handguard on the throttle side... Which just so happens to be the sole reason as to why I came to this video...and why I'm leaving it none the wiser. *insert slow clap*
Every video shows the non throttle side install, which, almost anyone can do. With factory grip on throttle side unless you cut the end off of grip and housing that twist throttle you CANNOT MOUNT THE SAME WAY AS NON THROTTLE SIDE B😊
I don't really know what you're saying.... the throttle sided fits into the end of bar with an expansion nut You have to use a spacer you can't bolt the end of the Brush guard to the end of the throttle grip...... People are hung up on that. I thought it was pretty self-explanatory.
First, there are no instructions included in kit. 2. Kit DOES NOT INCLUDE SPACERS AS YOU DESCRIBE. 3. “Self explanatory” no. Video say to do same on both sides; however, as pointed out in my comments unless you cut the end of throttle tube you Cannot install the expansion sleeve/bolt. As one TH-cam poster did, he pointed out that the end of grip needs to be rolled back. The. Using a hacksaw or similar tool cut the grip tube back about 1/8 inch. This allows the bolt, sleeve, and nut to be tightened without interfering with throttle operation.
@@yukonbill7172 Why are you complaining to me? Go make your own video. Put it out there if you're so concerned with it. And by the way number one, you have to have some mechanical aptitude. If you don't maybe you should just pay somebody to do it for you......
What are you talking about? Both sides are installed. I just started with the driver side out of chance.... If you can do one side you should be able to do the other right
I got the same ones. About to put them on my brand new templar x 😊
Nice !
I find it quite interesting that you made a point to accentuate the importance of installing the handguard on the throttle side correctly a multiplicity of times. Only to then totally disregard the installation process, as well as the installation method used, when installing the handguard on the throttle side... Which just so happens to be the sole reason as to why I came to this video...and why I'm leaving it none the wiser. *insert slow clap*
Thanks for watching
@@guzzifabrication3448😂😂😂 thanks for watching lol
Every video shows the non throttle side install, which, almost anyone can do. With factory grip on throttle side unless you cut the end off of grip and housing that twist throttle you CANNOT MOUNT THE SAME WAY AS NON THROTTLE SIDE B😊
I don't really know what you're saying.... the throttle sided fits into the end of bar with an expansion nut You have to use a spacer you can't bolt the end of the Brush guard to the end of the throttle grip...... People are hung up on that. I thought it was pretty self-explanatory.
First, there are no instructions included in kit. 2. Kit DOES NOT INCLUDE SPACERS AS YOU DESCRIBE. 3. “Self explanatory” no. Video say to do same on both sides; however, as pointed out in my comments unless you cut the end of throttle tube you Cannot install the expansion sleeve/bolt. As one TH-cam poster did, he pointed out that the end of grip needs to be rolled back. The. Using a hacksaw or similar tool cut the grip tube back about 1/8 inch. This allows the bolt, sleeve, and nut to be tightened without interfering with throttle operation.
@@yukonbill7172 Why are you complaining to me? Go make your own video. Put it out there if you're so concerned with it.
And by the way number one, you have to have some mechanical aptitude. If you don't maybe you should just pay somebody to do it for you......
Why you leave out the "most important side"
What are you talking about? Both sides are installed.
I just started with the driver side out of chance.... If you can do one side you should be able to do the other right
I had to dremel out the plastic on the throttle because it rubbed and wouldn't return to 0% throttle
Good job but I prefer the method of cutting back the grips and using the handlebar as the spacer rather than washers.
Hey thanks for watching !
We're did you get them?
That was a few years ago, I'm sure it was Amazon. Thanks
Getting branch slapped is no fun.... good job
iv never road i making that 1 before starting