The Sig Sauer P320 Nitron is a budget priced pistol that felt good to shoot, accuracy was acceptable but the pistol was shooting very low as seen in this review.
I've tried a Sig P228 and also shoots low. Same from a friend with P226. Some sights are designed for a combat sight picture. Cover the target with front post with the setup you have. 6 o'clock hold, or centre hold, is too low. Give it a try, hopes that helps. The Sig P320 was adopted by the US military as the M17. So were the older Sigs P228/P226. The military tend to use a 25 yard zero, which results in shooting low at closer ranges. May explain why the sights are that way. I don't like a combat hold, just explaining why.
I know this is an old video, but I had the same issue of shooting low when I got my 320 as well. My issue was the ammo. I was running Norma 124 gr and they always went low. I switched to PMC and S&B and it was always on target. Also keep in mind for Sigs the point of impact is the center of the front sight and not the top. Lastly, make sure your front and rear sights are marked with a number "8". If for whatever reason they are marked with a number "6", that would make it shoot low as well.
Shooting low like that is usually an indicator that you’re anticipating your recoil and flinching a minuscule amount. You’re then stringing shots left in a subconscious effort to compensate for it. Nothing a bit of practice can’t fix
We’ve been hearing of many instances where these Sigs have been firing off a round when holstering or coping very minor bumps or knocks . Jarrod from Guns and Gadgets made a video around 4 months ago about all the law suits that have recently been filed against Sig , I think there are at least 100 individual cases . Police officers have had their pistols go off just by getting into their patrol car seats . There is I believe a case where the pistol fired off a round when the seat belt in the car rubbed against the pistol. Many people have been shot in their legs as a result of these pistol going off just by holstering it .
As a new pistol shooter i am looking at acquiring my first pistol and this SIG is one of the choices. Can someone please enlighten me what was wrong with these pistols?
I know this video is 2 years old but can’t you fix the shooting low part and i don’t care about it shooting low cuz I’m more of a collector just wanted to know if you can fix it shooting low
What state? Each state is probably different. Qld you have to fill out a form. QP515 I think it is. It is a request to Weapons licencing to join a pistol club. Once approved you join a pistol club. I am with Shooters Union. You have to be a member of the pistol club for 6 months and 1 day. You have to do a safety course during that time. You also have to record a minimum of 3 shoots at a pistol range. Once that is all done you send that off to your pistol club representative and they give you a certificate which you then include with your application to weapons licensing. Pay your fees and play the waiting game.
I’m in Victoria, I got my provisional licence in April, then Covid. So I’m stuck trying to get my comp shoots in. You can apply for the 6 or 12 month provisional. Go for the 12. Otherwise if you don’t complete your training/competition shoots etc within the given timeframe, that’s it mate. No pistol licence for you. Ever.
I've tried a Sig P228 and also shoots low. Same from a friend with P226. Some sights are designed for a combat sight picture. Cover the target with front post with the setup you have. 6 o'clock hold, or centre hold, is too low. Give it a try, hopes that helps.
The Sig P320 was adopted by the US military as the M17. So were the older Sigs P228/P226. The military tend to use a 25 yard zero, which results in shooting low at closer ranges. May explain why the sights are that way. I don't like a combat hold, just explaining why.
So much for uniform gun laws
us special people in NSW aren’t allowed to have them 🤨
I know this is an old video, but I had the same issue of shooting low when I got my 320 as well. My issue was the ammo. I was running Norma 124 gr and they always went low. I switched to PMC and S&B and it was always on target. Also keep in mind for Sigs the point of impact is the center of the front sight and not the top. Lastly, make sure your front and rear sights are marked with a number "8". If for whatever reason they are marked with a number "6", that would make it shoot low as well.
Ah only realised this was a recent video when you mentioned the price at cleaver! Exact reason why I’m looking at p320 reviews lol
Shooting low like that is usually an indicator that you’re anticipating your recoil and flinching a minuscule amount. You’re then stringing shots left in a subconscious effort to compensate for it.
Nothing a bit of practice can’t fix
Exactly my thoughts
Came from the Hickok45 video where he barely missed any shots in like 20 clips lol many from distance
We’ve been hearing of many instances where these Sigs have been firing off a round when holstering or coping very minor bumps or knocks . Jarrod from Guns and Gadgets made a video around 4 months ago about all the law suits that have recently been filed against Sig , I think there are at least 100 individual cases . Police officers have had their pistols go off just by getting into their patrol car seats . There is I believe a case where the pistol fired off a round when the seat belt in the car rubbed against the pistol. Many people have been shot in their legs as a result of these pistol going off just by holstering it .
That law suit is for pistols made before August 8 2017. The ones since then have been upgraded to mitigate the issue.
@Anthony Roberts That’s good to know . Thanks
As a new pistol shooter i am looking at acquiring my first pistol and this SIG is one of the choices. Can someone please enlighten me what was wrong with these pistols?
@@DiscoArma3 I believe there was something not right with the trigger sear mechanism that has since been rectified.
@@conservativesniperhunter7439 scary stuff! Thanks for that
Could you please do a review on the 22-250 calibre.
What a great little pistol...certainly one I’ll be looking into when I get my cat h
Can you get an extended round magazine for that?
Glad they changed the trigger design, the older p320 triggers were terrible. For me, anyway.
Ozzie thats a nice mic you got damnn !
I know this video is 2 years old but can’t you fix the shooting low part and i don’t care about it shooting low cuz I’m more of a collector just wanted to know if you can fix it shooting low
best 9mm
Good review.
how are you shooting that on farmland may I ask? thanks
Easy, it’s an approved range, so I have to sign in etc just like any other range in the city...
@@ozziereviews oh nice. you had me thinking there for a second. look forward to more handgun reviews bud. love your work
@@ozziereviews are you your own RO on this range?
ozziereviews haha, f#%k! I thought you were done their mate. It never even occurred to me that you weren’t at a club range.
@@ozziereviews what's an "approved range"? What guns can you only use on a range like that?
How do I get started in pistol shooting, currently have a, b class license, what are the requirements for pistol target shooting?
What state? Each state is probably different. Qld you have to fill out a form. QP515 I think it is. It is a request to Weapons licencing to join a pistol club. Once approved you join a pistol club. I am with Shooters Union. You have to be a member of the pistol club for 6 months and 1 day. You have to do a safety course during that time. You also have to record a minimum of 3 shoots at a pistol range. Once that is all done you send that off to your pistol club representative and they give you a certificate which you then include with your application to weapons licensing. Pay your fees and play the waiting game.
@@michaelvanwest6262 im in Tasmania mate, have emailed firearms services but no reply 🙄
I’m in Victoria, I got my provisional licence in April, then Covid. So I’m stuck trying to get my comp shoots in. You can apply for the 6 or 12 month provisional. Go for the 12. Otherwise if you don’t complete your training/competition shoots etc within the given timeframe, that’s it mate. No pistol licence for you. Ever.
I had my long arms licence already, it makes it much easier if your in the system. The paper work was next to nothing.
Good luck.
@@BadgerMcblasty you can't reapply?
Shooter error my friend not gun
865$ is that US?
How are people on the US shooting themsleves with this..?
Must this have one in the chamber..?
has ammo wemt scarce there. its literally a risk here to go sholting because you cant find more in the states
Can you get an extended round magazine for that?
Depends what country/US state that you're in.
If in Australia, try Southern Australia.