I have a banshee 10mm as well. I shot it side by side with my 10mm Stribog. Both are awesome. I like the feel of the Stribog a bit better. I’m not getting rid of either :-)
@@1308SPAZZeverything I’ve seen regarding the CMMG Mk10 Banshee suggests that it’s reliable. Perhaps even more so, as it’s design shares many components of standard AR pattern rifles rather than being wholly proprietary like the Stribog. From its inherent simplicity to its natural acceptance of Glock factory and aftermarket magazines, to it’s reported performance with all factory 10mm ammunition ranging from the downloaded “light” loads to full power, all while doing well suppressed… the Banshee is a compelling option. That said, I’m in the market for a PDW. A true PDW, not a PCC. The major and most important distinction here is the inherent compactness of the Stribog.
MAC: I suggest we petition Federal to load all 10mm offerings up to a reasonable velocity. Federal’s current 10mm velocities are unacceptable. The SIG ammo would be a good benchmark. 180 gr at 1250fps, warm but not too hot.
It's a what's your budget game? If you have the money, buy a stribog, if you don't have much get a cheaper pcc , minimal accessories and plenty of ammo and mags. I've been a poor (500 and under) and made trial by error mistakes. Fortunately, I can buy upper mid(100-1000) priced guns and make good accessory decisions. Ngl, I've gotten the itch for 10mm pistols. Personally, I'd get a banshee, but it's a bit rich for my taste.
@@joew5792I have learned to use 10mm Magtech for training ammo which will be 1300fps with that barrel length. Then use Underwood for serious use which can be over 2000fps.
It is very interesting that there's a resurgence of the 10mm happening now, I've always thought the 10mm would make for a good PPC due it's power level, I know several guys who use cheap 10mm hipoints to hunt deer with with good results here in KY. I just built an AR in 10mm using glock mags, although I would prefer the Stribog mags for looks. It will be interesting if the Stribog mags end up being the defacto alternative mag to the Glocks and if so if others will make AR lowers for them. I will say building a blowback AR does have the advantage of being cheaper (much cheaper, like $750 less), seemingly fewer reliability issues and the ability to use either 40 or 10mm ammo (the headspace in a blowback gun is not fixed as it is in the Stribog). Of course, the drawback is more felt recoil due to the mass of the bolt/buffer and spring but even then the 10mm isn't quite so back that blowback is that bad.
@@ShizawnSanders So far the SGM mags have worked flawlessly in my AR but I'd prefer the look of the straight Stribog mags. I guess owning a 9mm Stribog I'm just partial to the look of the orginal...
I think it was IraqVeteran8888 who did a video clip at SHOT at the Grand Power booth several years back when they first came out, and Jaro was there smiling next to him. When Eric pronounced it “Stry - Borg” you could see Jaro visibly flinching. 😂😂😂
@@Fishlord136slovakian here, use whatever suits you. It was old slavic god of thunder and wind, but most of current population wouldn't recognize the word (unless they are into firearms :) ). Nobody expects say native english speakers to have 100% original pronunciation. But if you care, ie that strybog when pronounced by google translate is matching original (words with "i" and "y" sound the same back home).
I wanted a stribog a3 but the ap1 was on sale so I got it. I was apprehensive to invest in mags given your past videos. I had the opportunity to buy all the stribog mags; straight plastic 30, straight metal reinforced 30, curved 30 and straight 20 round. Shot all fully loaded and had no malfunctions. I keep all fully loaded for a year and no cracking feed lips. It was fun to try. The metal ones are quite revered on reddit and hard to get.
Done seen some other reviews regarding this 10mm SBR/ PCC as well as your review. There's been great positive feedback, it's actually awesome to see 10mm is making a great comeback as does Rocky Balboa. Many gun manufacturers are getting in on this great round. Thnx and keep up the great work.
I have to use a punch on my SP9A3 as well on the takedown pins. I really want the 10mm SP10A3 and was extremely impressed with how smoothly it shot… perfect pistol for the money.
I got mine a couple months ago. It almost instantly became my favorite 10mm PCC, and one of my favorite PCCs period. I do wish there was a 30 round option. Or it could use my 30 round 10mm MP5 magazines.
I think James Reeves interviewed a rep from Grand Power at IWA about this SBR. He was told that the magazines were the same as the H&K UMP. It will accept UMP mags. And, James was informed that a .45 Stribog SP03 is coming soon.
@@10mikemike89yes, there is a UMP 10mm and the 30rd mags are like $120 per magazine. They should have made this as a Glock compatible lower where the 30rd mags are only $20 per magazine
@@10mikemike89 H&K only made the UMP in .40 & .45. There is another company that made a replica for the UMP in 10 mm with a conversion kit. OMEGA GIDEON SHADOW 10MM PISTOL.
$150… I just ordered 2 from HKParts . This gun is amazing and recoil impulse is extremely pleasant. Only thing missing were the 30 rounders so had to grab em before they are gone.
@@benmorall7664 yeah but thats just nuts on another level. $150 per magazine to have a 30 rounder. Why didn't you just get a CMMG MK10 Banshee which are $20 per 30rd mags.
Always wanted to be a gunsmith/builder. I'm in the process of getting a small business set up. I plan on focusing on ak/comblock style firearms. I hope one day you test one!
Stribog came out with a 10mm, and grandpower's website says 45 acp is on the way as well. So hopefully (for me at least) 40 s&w will also be on the way.
I still love my sp9a1 and I got it with the brace for $799 a few years ago. I’m sure the roller delayed a3 version shoots a little softer but for the money it’s probably one of my best bang for the buck guns I’ve ever bought. As far as I know they don’t make the a1 model anymore though so any stribog you buy is going to be over a grand now
Every PCC review I've watched over the past 3years, has been full of commenters sayig they're waiting for the company to offer it in 10mm. Well let's see how well this one does.
For those not in the know, the original design standards for 10mm is 200g @ 1250fps. Anything slower is considered an FBI load. 9mm is just .38 Super. Fight me. 😂
200gr at 1250fps would be great. That would be some serious power. I know Underwood has some that go over 2000fps in light loads. Very high energy for what it is.
I *REALLY* wanted the Stribog 10 mm when I saw it on the SHOT Show videos this year. I still like a lot of what I'm seeing. Internally, the operation is simple. Given the large size of the chunky bolt, the roller delay system almost looks like a combination of a roller delay and a blow back system. I love the clunky simplicity of it, side ejecting and easily lost roller pin not withstanding. It's good that they finally got their 20 round magazines to work. Mags are a common source of problems for semi-autos. They could have done themselves and their customers a huge favor by using Glock mags. "Does it take Glock mags?" is a bit of an industry joke, but with good reason. It's not a kindness to force me to buy proprietary magazines that don't fit my other firearms and that simple issue is a strong deterrent to me buying the Stribog. The price is the other deterrent. I suppose their business guys are looking at this as a profit maximization opportunity. They have a good 10 mm PDW when the market has been begging for something like this and has had a couple of undelivered promises such as the EP10 from Extar. The classic business school lesson is profit maximization. When entering a new market with great demand, sell all you can at $1299, and when that attracts competitors, lower your price accordingly. This is the "whatever the market will bear" marketing strategy. I feel abused as a customer and I don't like that. I don't expect the 10 mm to be the same cost as their 9 mm. There is additional development spread over lower production volume and there is a little more material in the beefier 10 mm version, but it's unreasonable (and a bit abusive) to expect your first hundred customers to pay for the development costs. The 10 mm version should be $100 to $200 more than the 9 mm version. More than that and I feel like a sucker for buying one, no matter how much I want one, and I don't like feeling like a sucker. Even though I'm a dirty capitalist by nature, I resent a manufacturer for selling products for "whatever the market will bear". I suppose it's safe to say, I won't bear it. :-( Maybe we can talk PSA into making a 10 mm PDW.
Your price difference was my exact thought when he said “$699 for the 9mm.” I thought he was gonna say like $899 but $1299 is such a shame. It’s like in your face price gouging
I’m honestly sick of Glock mags in everything. I don’t mind a proprietary magazine if it’s not Sig/HK priced. A 30 rd scorpion mag is the same price as a 30rd Glock mag, and I’d rather have the Scorpion mag cuz it’s curved and has a double feed column.
Glock mags are single feed garbage and they look like ass. If you want to use glock mags so badly then buy a glock compatible lower. Also, this gun actually is "$100 to $200" more than the 9mm roller delayed system.
I want to see that too but the Banshee already wins in magazine cost and compatibility. 30rd 10mm Glock SGM mags are $20. H&K 30rd 10mm mags(what this A3 takes) are $120. That's a whopping $100 per magazine savings for 30rd mags. The 20rd mags they make for this are still more expensive than the SGM 30rd too and I bet the SGM 30rd isn't that much longer then the Stribog 20rd. It was CRAZY for them to use the UMP magazine design.
Banshee with Glock 20 mags, AR Lower grips, trigger components compatible. Plus I have the 10 mm Banshee and then bought the 45 acp Banshee upper that takes Glock 21 magazines. I have a Striborg 9 mm but I like my CZ Scorpion better. 'In for a penny in for a pound' So I bought the A3 Tactical Striborg Lower Reciever. This conversion takes AR-15 drop-in Triggers and AR-15 grips. And it is compatible with CZ Scorpion Magazines including Manticore arms! So now both my Striborg and CZ use the same magazines.
Seems it should be easy enough for Grand Power to design and sell a "Lite Spring" set up, for running this lower power "Range " ammo by Federal and others? Even give the buffer a lighter color so you could easily recognize what buffer and spring set up are in the gun. ???
Since this is currently the only 10mm magazine pcc magazines know of other than the mp5/10 i wonder if this magazine will gain any popularity in aftermarket for other fireman's, such as a lingle lower for the b&t apc10 to take these mags
**10 mm is precisely where the 41 magnum was supposed to be, (the 41 ended up just being a junior 44) halfway between 357 and 44 mag. **Standard Glock magazines are 15 rounds the Arrendo accessories had a +5 floor plate designed like the Kriss floor plate. **So the 20-round magazine really isn't bringing anything new to the table, and why didn't they just make it 30 rounds, is there any reason why?
@@martinsonofwar395 so basically they put out a faulty product to begin with 🤔 **Then they should have made it 33 rounds **But thank you for the information!
MAC is this reliable enough for use as a duty gun, I worked for contractor / federal reserve as armored transport officer. I was considering MP5 clones but this seems like a good option. We can carry PCCS/SMGs in pistol calibers
Thanks for the video! Could we get a (subjective) evaluation of the felt recoil of the Stribog vs the CMMG Banshee vs straight blow-back AR 10mm vs DI AR 10mm (if you've had the pleasure of firing one)? I have a 16" DI 10mm upper from Macon Armory, but thinking about picking up either a Banshee or the Stribog for something a little shorter.
There is a DI 10mm? What's that like? Do they make like a 7"-10" barrel version? DI is a very soft recoiling system. Its why 9mm blowback literally has more recoil than 5.56 DI.
@@ShizawnSanders there isn’t a DI 10mm manufactured and available at retail, but you can order an upper be built by a few places. I had mine done by Rudy at Macon Armory, there is also RMW Xtreme and The AR Guy. They offer other (pistol) calibers as well.
@@johnnyk5 is there a 10mm DI barrel you can point me to somewhere between 8-10" with a pistol length gas port and a 10mm bolt that goes into a standard AR carrier? At point I can just build my own. Really wondering if hot 10mm makes enough gas to cycle DI. I'm actually interested. I can see anemic 10mm not working but as long as the hotter FMJ target loads work and Underwood and Liberty hot duty/hunting ammo works i will build me a cool 10mm pistol or SBR.
I've been wanting a sub-style 10mm for a long time. Plenty of reliable options for awhile, but none of them had the right aesthetic. I've never thought that magazines canted toward the grip look good (I understand it's usually from pistol mag compatibility). Enter the Stribog. I was pretty excited and got one early on when they were hard to come by. I haven't even shot it yet, I just like to look at it :) Tragic, I know.
I have yet to shoot a Pcc, other than a HiPoint Carbine (its not even mine). So have nothing to compare it to, but for $350. it is a brick, and capacity, aesthetics, and ergo's, all suck, however it runs like mad, with everything you throw at it. plus it has won several competitions (not me), when other PCc's couldn't keep up, without problems. However, if I were to be able too afford a PCC. I personally want the Stribog oor an Extra EP99 as my first Pcc/Pdw
Cool, but for 1299 that's a big strike it wouldn't run standard range ammo. Not everyone wants to get a suppressor. And 9 mm a1 and a3 still run $750 to $800 and 900 to a 1000 respectively. Good overall review though, I always appreciate the level of detail.
I'm always eager to explore new firearms, especially in powerful calibers like 10mm. The mechanics behind its operation are fascinating, and this video provides a great insight into how the SP10A3 performs.
Yeah, it looks like it would be a nice little camp carbine. I'm surprised how many people that I've mentioned that to have no idea what a "camp carbine" even is. Have you guys done anything on that?
@@martinsonofwar395 I had a vector 10mm and have a banshee mk10. Glock mags really aren’t helping 10mm PCCs with their lack of 10mm extendos and no aftermarket.
I like but I don't $1300 with an additional $200 tax stamp like it. That's before stock and optics too. So, looking at $2k+ unless you have spare parts laying around.
Yay for that! I'm glad more manufacturers are supporting 10mm.
love my Stribog, sending regards from Slovakia!!! ❤
I've been loving my Banshee 10mm. No mechanical issues. Very accurate. Great ergonomics.
After learning the price on the Stribog, I am leaning hard towards the Banshee.
@@brianwinkler8183 For what it's worth it's got my vote. Big plus - no proprietary mags.
I have a banshee 10mm as well. I shot it side by side with my 10mm Stribog. Both are awesome. I like the feel of the Stribog a bit better. I’m not getting rid of either :-)
Banshee 👍🏻
@@mjohn3006what do you like better? How does the recoil compare?
It's nice to see a 10mm PCC that's reliable with true 10mm power ammo.
cmmg banshee10mm not reliable ?
@@1308SPAZZeverything I’ve seen regarding the CMMG Mk10 Banshee suggests that it’s reliable. Perhaps even more so, as it’s design shares many components of standard AR pattern rifles rather than being wholly proprietary like the Stribog. From its inherent simplicity to its natural acceptance of Glock factory and aftermarket magazines, to it’s reported performance with all factory 10mm ammunition ranging from the downloaded “light” loads to full power, all while doing well suppressed… the Banshee is a compelling option.
That said, I’m in the market for a PDW. A true PDW, not a PCC. The major and most important distinction here is the inherent compactness of the Stribog.
MAC: I suggest we petition Federal to load all 10mm offerings up to a reasonable velocity. Federal’s current 10mm velocities are unacceptable. The SIG ammo would be a good benchmark. 180 gr at 1250fps, warm but not too hot.
Looks like shrinkflation has affected ammo now 😂
magtech is also way hoter than federal
I like how fed’s hydrashok is subsonic, so there is a factory suppressible load.
The $700 9mm Stribogs were blowback. When they started selling the roller delayed models they were $1000+, so $1300 for 10mm today isn't outrageous.
Perhaps, but when a PCC nears $1500, why not just save for a B&T? I love Grand Power's handguns, but the Stribog has had a lot of teething issues.
It's a what's your budget game?
If you have the money, buy a stribog, if you don't have much get a cheaper pcc , minimal accessories and plenty of ammo and mags.
I've been a poor (500 and under) and made trial by error mistakes.
Fortunately, I can buy upper mid(100-1000) priced guns and make good accessory decisions.
Ngl, I've gotten the itch for 10mm pistols. Personally, I'd get a banshee, but it's a bit rich for my taste.
So does it get 1000fps with federal 10mm like the handguns?
@@joew5792I have learned to use 10mm Magtech for training ammo which will be 1300fps with that barrel length. Then use Underwood for serious use which can be over 2000fps.
Nice 10mm pistol, but If they dont bring that price down they are not gonna sell as much as the 9mm Stribogs.
It is very interesting that there's a resurgence of the 10mm happening now, I've always thought the 10mm would make for a good PPC due it's power level, I know several guys who use cheap 10mm hipoints to hunt deer with with good results here in KY. I just built an AR in 10mm using glock mags, although I would prefer the Stribog mags for looks. It will be interesting if the Stribog mags end up being the defacto alternative mag to the Glocks and if so if others will make AR lowers for them. I will say building a blowback AR does have the advantage of being cheaper (much cheaper, like $750 less), seemingly fewer reliability issues and the ability to use either 40 or 10mm ammo (the headspace in a blowback gun is not fixed as it is in the Stribog). Of course, the drawback is more felt recoil due to the mass of the bolt/buffer and spring but even then the 10mm isn't quite so back that blowback is that bad.
It would be great if they made a Glock lower for this 10mm because 30rd SGM glock mags are reliable and only $20 per.
@@ShizawnSanders So far the SGM mags have worked flawlessly in my AR but I'd prefer the look of the straight Stribog mags. I guess owning a 9mm Stribog I'm just partial to the look of the orginal...
The mags are not proprietary the Stribog will take UMP mags
Good to see they finally made Stribog in the Loard's caliber
It comes in 357 magnum?
been waiting on your take on this MAC
I think it was IraqVeteran8888 who did a video clip at SHOT at the Grand Power booth several years back when they first came out, and Jaro was there smiling next to him. When Eric pronounced it “Stry - Borg” you could see Jaro visibly flinching. 😂😂😂
I’ve never heard it pronounced by a Slovakian but I feel like if you just stick with pronouncing it like стрибог you’ll be alright
@@Fishlord136slovakian here, use whatever suits you. It was old slavic god of thunder and wind, but most of current population wouldn't recognize the word (unless they are into firearms :) ). Nobody expects say native english speakers to have 100% original pronunciation. But if you care, ie that strybog when pronounced by google translate is matching original (words with "i" and "y" sound the same back home).
I wanted a stribog a3 but the ap1 was on sale so I got it. I was apprehensive to invest in mags given your past videos. I had the opportunity to buy all the stribog mags; straight plastic 30, straight metal reinforced 30, curved 30 and straight 20 round. Shot all fully loaded and had no malfunctions. I keep all fully loaded for a year and no cracking feed lips. It was fun to try. The metal ones are quite revered on reddit and hard to get.
I have had mine for a couple weeks,so far so good
Done seen some other reviews regarding this 10mm SBR/ PCC as well as your review. There's been great positive feedback, it's actually awesome to see 10mm is making a great comeback as does Rocky Balboa. Many gun manufacturers are getting in on this great round. Thnx and keep up the great work.
Another quality video. Thanks, Tim and Jason.
I have to use a punch on my SP9A3 as well on the takedown pins. I really want the 10mm SP10A3 and was extremely impressed with how smoothly it shot… perfect pistol for the money.
I got mine a couple months ago. It almost instantly became my favorite 10mm PCC, and one of my favorite PCCs period. I do wish there was a 30 round option. Or it could use my 30 round 10mm MP5 magazines.
Have you tried ump 10mm mags?
@@EvanDickersonM81 no. I don’t have any
Wait-do you actually have an HK MP5 in 10mm? If so, I need to immediately meet you at the range.
I have a 10mm mp5k :-)
Yeah, 30rd UMP 10mm mags are over $100 per. Would be great if they made a glock lower then good SGM 30rd mags are only $20 per.
Man, I’ve been waiting for this video to drop!
I ran 200 rounds of blazer 180gr range ammo no feed issues
Yep! I have pushed “notify me” for numerous company’s. I will have one when they are available.
I drooled over the G40 MOS because of your video in 2015. Its been my bear gun for 4 years. SRO and all
Very cool...if i remember right from the shot shpw and iwi videos 45acp is up next....hope that one comes out strong with no issues as well...
I agree with you about 10mm. Love it! I'm not spending that on a rifle that I can't afford to shoot and can't find properly loaded ammo for.
Wat?
I like 10MM very well also this Stribog......Thanks Mac....
Old F-4 Shoe🇺🇸
Sounds terrific. Nice review. Thanks !
I think James Reeves interviewed a rep from Grand Power at IWA about this SBR. He was told that the magazines were the same as the H&K UMP. It will accept UMP mags. And, James was informed that a .45 Stribog SP03 is coming soon.
I do mention the mags are UMP based in the video. I know of the 45 but wasn’t sure if I could talk about it yet.
@@Militaryarmschannel The Grand Power rep only mentioned the .45 was still being developed. But, didn't give out any further information.
There is a 10mm ump?
@@10mikemike89yes, there is a UMP 10mm and the 30rd mags are like $120 per magazine. They should have made this as a Glock compatible lower where the 30rd mags are only $20 per magazine
@@10mikemike89 H&K only made the UMP in .40 & .45. There is another company that made a replica for the UMP in 10 mm with a conversion kit. OMEGA GIDEON SHADOW 10MM PISTOL.
It's good to see that the Strib is redeeming itself with its newest offerings.
Ive got stribog taste and hi-point budget 😂
I hear you brother! Me too!😂
You and me both. 😢 😂
😂
Whatever you do don't look up the B&T apc10
@@epapa737 Holy smokes it's $2700 😱💀😭
Look forward to your review on the SP45A3.
I remember watching Ronin and the German guy Gregor had one of those red dots mounted on his Glock 17L, haven't seen one in years.
Pretty sure it takes H&K UMP mags which are made in 30rd but last i checked they are $120 per magazine!
$150… I just ordered 2 from HKParts . This gun is amazing and recoil impulse is extremely pleasant. Only thing missing were the 30 rounders so had to grab em before they are gone.
@@benmorall7664 yeah but thats just nuts on another level. $150 per magazine to have a 30 rounder. Why didn't you just get a CMMG MK10 Banshee which are $20 per 30rd mags.
Got 3 of those holosights! Hush yo mouth! We ain’t old MAC! DAMN IT MAN!🤣🤣🤣🤣🤣🤣
I like it!!! Love my B&T though.
Thanks again
You’re a little late to this party, but thanks for finally making this video.
Always wanted to be a gunsmith/builder. I'm in the process of getting a small business set up. I plan on focusing on ak/comblock style firearms. I hope one day you test one!
Lovin' mine so far. Also, my rear pin is much easier to get out. Purchased from DK on 02/01.
Stribog came out with a 10mm, and grandpower's website says 45 acp is on the way as well. So hopefully (for me at least) 40 s&w will also be on the way.
I still love my sp9a1 and I got it with the brace for $799 a few years ago. I’m sure the roller delayed a3 version shoots a little softer but for the money it’s probably one of my best bang for the buck guns I’ve ever bought. As far as I know they don’t make the a1 model anymore though so any stribog you buy is going to be over a grand now
Never really wanted to jump on the 10mm bandwagon due to the cost of ammo and I’m a fan of .357 mag revolvers. This is a game changer for me.
Great video. I still run one of those old bushnell holosights! It's held up for me since the 90s
Every PCC review I've watched over the past 3years, has been full of commenters sayig they're waiting for the company to offer it in 10mm. Well let's see how well this one does.
Nice review. I was wondering if you could review the Beretta PMXs. I saw your short and was hoping for a full review. Thanks
For those not in the know, the original design standards for 10mm is 200g @ 1250fps. Anything slower is considered an FBI load.
9mm is just .38 Super. Fight me. 😂
I have some 10mm 100gr Lehigh Defense Extreme Defenders I loaded to ~1700fps. 😂
@@martinsonofwar395yeah. That's one of my favorites too.
200gr at 1250fps would be great. That would be some serious power. I know Underwood has some that go over 2000fps in light loads. Very high energy for what it is.
I *REALLY* wanted the Stribog 10 mm when I saw it on the SHOT Show videos this year. I still like a lot of what I'm seeing. Internally, the operation is simple. Given the large size of the chunky bolt, the roller delay system almost looks like a combination of a roller delay and a blow back system. I love the clunky simplicity of it, side ejecting and easily lost roller pin not withstanding.
It's good that they finally got their 20 round magazines to work. Mags are a common source of problems for semi-autos. They could have done themselves and their customers a huge favor by using Glock mags. "Does it take Glock mags?" is a bit of an industry joke, but with good reason. It's not a kindness to force me to buy proprietary magazines that don't fit my other firearms and that simple issue is a strong deterrent to me buying the Stribog.
The price is the other deterrent. I suppose their business guys are looking at this as a profit maximization opportunity. They have a good 10 mm PDW when the market has been begging for something like this and has had a couple of undelivered promises such as the EP10 from Extar. The classic business school lesson is profit maximization. When entering a new market with great demand, sell all you can at $1299, and when that attracts competitors, lower your price accordingly. This is the "whatever the market will bear" marketing strategy. I feel abused as a customer and I don't like that. I don't expect the 10 mm to be the same cost as their 9 mm. There is additional development spread over lower production volume and there is a little more material in the beefier 10 mm version, but it's unreasonable (and a bit abusive) to expect your first hundred customers to pay for the development costs. The 10 mm version should be $100 to $200 more than the 9 mm version. More than that and I feel like a sucker for buying one, no matter how much I want one, and I don't like feeling like a sucker. Even though I'm a dirty capitalist by nature, I resent a manufacturer for selling products for "whatever the market will bear". I suppose it's safe to say, I won't bear it.
:-(
Maybe we can talk PSA into making a 10 mm PDW.
Holy moly that’s a long comment! I’m gonna read the whole thing though, because it looks like you got a lot to get off your chest. Lol
Your price difference was my exact thought when he said “$699 for the 9mm.” I thought he was gonna say like $899 but $1299 is such a shame. It’s like in your face price gouging
I’m honestly sick of Glock mags in everything. I don’t mind a proprietary magazine if it’s not Sig/HK priced. A 30 rd scorpion mag is the same price as a 30rd Glock mag, and I’d rather have the Scorpion mag cuz it’s curved and has a double feed column.
Glock mags are single feed garbage and they look like ass. If you want to use glock mags so badly then buy a glock compatible lower. Also, this gun actually is "$100 to $200" more than the 9mm roller delayed system.
@@danfromthesouth5352 - Yeah. I'm working through some issues. 🙂
Could you compare this to the CMMG in 10mm? 😊🙏 Good review as always, thank you!
I want to see that too but the Banshee already wins in magazine cost and compatibility. 30rd 10mm Glock SGM mags are $20. H&K 30rd 10mm mags(what this A3 takes) are $120. That's a whopping $100 per magazine savings for 30rd mags. The 20rd mags they make for this are still more expensive than the SGM 30rd too and I bet the SGM 30rd isn't that much longer then the Stribog 20rd. It was CRAZY for them to use the UMP magazine design.
Thanks, Tim. Now there’s another gun on my “get list.” I already get flak about how many guns I have!
You can never have too many. 😂
Banshee with Glock 20 mags, AR Lower grips, trigger components compatible. Plus I have the 10 mm Banshee and then bought the 45 acp Banshee upper that takes Glock 21 magazines.
I have a Striborg 9 mm but I like my CZ Scorpion better.
'In for a penny in for a pound' So I bought the A3 Tactical Striborg Lower Reciever. This conversion takes AR-15 drop-in Triggers and AR-15 grips. And it is compatible with CZ Scorpion Magazines including Manticore arms!
So now both my Striborg and CZ use the same magazines.
Have a Vector Enhanced with a 6.5 barrel chambered in 10mm. Thing is fun to shoot so 10mm is the way to go if you haven’t tried it
My bushnell holo sight finally died last week. After being on a dozen or so guns for many many rounds.
HB industries makes a Zhukov stock adapter, that thing fits good & tight and works great on the Bog.
I love how Karl Brügger strait up says the owner of stribog stole his design with the 9mm blow back stribogs
🇺🇸
Great video. Thanks.
Love my A2
Can't wait for Lingle Industrise lower to come out for 10mm/45acp
I paid $950 for the roller delayed sp9A3 so the 10mm isn’t that far off since it’s also the roller delayed version
Seems it should be easy enough for Grand Power to design and sell a "Lite Spring" set up, for running this lower power "Range " ammo by Federal and others? Even give the buffer a lighter color so you could easily recognize what buffer and spring set up are in the gun. ???
Would you prefer the Stribog or the CMMG?
CMMG
Very nice if im buying a pcc its gonna be in 10mm.
That's why the cz scorpion 9mm mags functions so well
I would like to see a velocity comparison out of radial delayed blow back system and ar buffer system. Also against a 5 inch pstol.
I can’t wait for the 45ACP😜😎
Will it handle a religious diet of underwood or buffalo bore ammo?
10mm has the power of 10mm.
Since this is currently the only 10mm magazine pcc magazines know of other than the mp5/10 i wonder if this magazine will gain any popularity in aftermarket for other fireman's, such as a lingle lower for the b&t apc10 to take these mags
getting this forsure!
Hk usp in 10mm = NEED
Edit: i imagine there is someplace where all thread protectors dwell in secret next to 1911 recoil springs
Great video
**10 mm is precisely where the 41 magnum was supposed to be, (the 41 ended up just being a junior 44) halfway between 357 and 44 mag.
**Standard Glock magazines are 15 rounds the Arrendo accessories had a +5 floor plate designed like the Kriss floor plate.
**So the 20-round magazine really isn't bringing anything new to the table, and why didn't they just make it 30 rounds, is there any reason why?
SGM make "30rd" 10mm mags. They work flawlessly. In reality they are 28rd mags, though.
@@martinsonofwar395 so basically they put out a faulty product to begin with 🤔
**Then they should have made it 33 rounds
**But thank you for the information!
@@martinsonofwar395My smg mag loads all 30 of 10mm, not easy when its new tho.
Glock mags are single feed, fragile, and look hideous.
@@HYDRAdude can't believe you said fragile. Who wants 20rds for a pcc when you have other cheaper options
Its funny that people in their 50's consider old, those in their 70's are young.
This vs the CMMG banshee… which wins?
CMMG, you won’t need a punch and hammer😂 They are awesomeness, soft shooting and all metal.
MAC is this reliable enough for use as a duty gun, I worked for contractor / federal reserve as armored transport officer. I was considering MP5 clones but this seems like a good option. We can carry PCCS/SMGs in pistol calibers
this is the modern alaskan bush gun
The old bushy holosight nice touch looks like it belongs 😊
Federal needs to load 10mm range ammo a little hotter
Perfect truck gun
The 10mm with 7.5 in barrel is man stopping definitely and 4 legged critter too
Ump magazines work. Expensive as hell but it is what it is if you want 30rd mags
From what i understand that thread pitch on the Stribog isn’t too common. What suppressor set up are you using
Thanks for the video! Could we get a (subjective) evaluation of the felt recoil of the Stribog vs the CMMG Banshee vs straight blow-back AR 10mm vs DI AR 10mm (if you've had the pleasure of firing one)? I have a 16" DI 10mm upper from Macon Armory, but thinking about picking up either a Banshee or the Stribog for something a little shorter.
There is a DI 10mm? What's that like? Do they make like a 7"-10" barrel version? DI is a very soft recoiling system. Its why 9mm blowback literally has more recoil than 5.56 DI.
@@ShizawnSanders there isn’t a DI 10mm manufactured and available at retail, but you can order an upper be built by a few places. I had mine done by Rudy at Macon Armory, there is also RMW Xtreme and The AR Guy. They offer other (pistol) calibers as well.
@@johnnyk5 is there a 10mm DI barrel you can point me to somewhere between 8-10" with a pistol length gas port and a 10mm bolt that goes into a standard AR carrier? At point I can just build my own. Really wondering if hot 10mm makes enough gas to cycle DI. I'm actually interested. I can see anemic 10mm not working but as long as the hotter FMJ target loads work and Underwood and Liberty hot duty/hunting ammo works i will build me a cool 10mm pistol or SBR.
@@ShizawnSanders I can’t point you to any off-the-shelf DI barrels, but the bolt is a standard 6.8/224 Valkyrie.
@@johnnyk5 no shit on the bolt? That's interesting.
I've been wanting a sub-style 10mm for a long time. Plenty of reliable options for awhile, but none of them had the right aesthetic. I've never thought that magazines canted toward the grip look good (I understand it's usually from pistol mag compatibility). Enter the Stribog. I was pretty excited and got one early on when they were hard to come by. I haven't even shot it yet, I just like to look at it :) Tragic, I know.
Like most 10mm range ammo, that ammo is about 100fps faster than 40sw range ammo.
10mm has potential.
But most manufacturers don''t use it.
More power More money
I put an XD 10mm in a MCK chassis, and it runs.
This second I see ejection cover and lock open when empty mags how did that part work!
I have yet to shoot a Pcc, other than a HiPoint Carbine (its not even mine). So have nothing to compare it to, but for $350. it is a brick, and capacity, aesthetics, and ergo's, all suck, however it runs like mad, with everything you throw at it. plus it has won several competitions (not me), when other PCc's couldn't keep up, without problems. However, if I were to be able too afford a PCC. I personally want the Stribog oor an Extra EP99 as my first Pcc/Pdw
You know how cool a real deal SD version of the Stribog would be?
They really should do a .40 version tho. 40 UMP mags exist.
.40 is a great PCC cartridge and more affordable than 10mm with good power yet.
That build really seems to lessen the recoil of a 10 mm. Nice
Cool, but for 1299 that's a big strike it wouldn't run standard range ammo. Not everyone wants to get a suppressor. And 9 mm a1 and a3 still run $750 to $800 and 900 to a 1000 respectively. Good overall review though, I always appreciate the level of detail.
I'm always eager to explore new firearms, especially in powerful calibers like 10mm. The mechanics behind its operation are fascinating, and this video provides a great insight into how the SP10A3 performs.
One of these companies need to make a 7.5 FK offering
10mm is a straight walled cartridge. Thats why the mags are straight. No need for any curvature.
Yeah, it looks like it would be a nice little camp carbine. I'm surprised how many people that I've mentioned that to have no idea what a "camp carbine" even is. Have you guys done anything on that?
You say camp carbine and most people are going to think of the Marlin Camp 9. So it doesn’t really mean much.
No need for another name @ camp carbine
@@echofoxtrotwhiskey1595correct
@@DinoNucci If he’s talking about like a woods gun for wildlife defense, sure this fits, but there’s tons of other good options out there.
@@echofoxtrotwhiskey1595 you misread, try again
for this being 1300 deer hairs, i would just spend an extra 2 or 300 for a CMMG
Stribog got it right by making a PCC in 10mm and making it not use Glock mags
On one hand, I would have to buy more and different mags. On the other, I want more capacity
@@martinsonofwar395 I had a vector 10mm and have a banshee mk10. Glock mags really aren’t helping 10mm PCCs with their lack of 10mm extendos and no aftermarket.
I like but I don't $1300 with an additional $200 tax stamp like it. That's before stock and optics too. So, looking at $2k+ unless you have spare parts laying around.
User error
I’m sold. Now if I could find one. Plenty of 9mm, no 10mm that I can find so far.
I'd be curious to see you fire that with a chronograph.
❤❤So it would still work without that roller or pin ??? probably work on the range ammo if the pin was removed ?
Aero survival rifles are good in 9 and 10 mm for a pcc if u dont mind a buffer tube
Direct blowback = 💩
Thank you for talking about 40S&W in this. I emailed Global many times and just silence. Guess I'll pair mine with my Ti-Rant 45M
They don’t want liability if something happens.