Victron Multiplus II with Raspberryi Pi 4 and VenusOS | Installation
ฝัง
- เผยแพร่เมื่อ 27 มิ.ย. 2024
- Come with me installing the first time the Victron Multiplus II 48V|300VA|35A and integrating it into the VenusOS installation on my Raspberry Pi 4.
Victron VRM Portal: vrm.victronenergy.com/
Victron Professional: professional.victronenergy.com/
Victron Connect: www.victronenergy.com/inverte...
Multiplus Configuration Tool: • How to Program a Victr...
DuPPa Isolated 4 port USB to TTL UART FTDI: www.duppa.net/shop/isolated-4...
DuPPa VE.Direct JST cable: www.duppa.net/shop/ve-direct-...
Affiliate links:
Victron Energy MultiPlus-II 120V, 3000VA 48-Volt Pure Sine Wave Inverter and 35 amp Battery Charger
amzn.to/3TDYdS4
XRH 48V 100AH LiFePO4 Battery
amzn.to/3Q6WoML
Victron Interface MK3-USB-C (VE.Bus to USB-C)
amzn.to/3xpONlz
Victron Energy RJ45 UTP Cable
amzn.to/3vzeFei
Victron Energy SmartShunt IP65 500 amp Battery Monitor (Bluetooth)
amzn.to/3PIIOP7
12 AWG Power Cord 12FT Open End
amzn.to/4afOUPh
Amazon Basics 6-Outlet
www.amazon.com/gp/product/B01...
Wire Ferrule Connectors Kit
amzn.to/4a6wqkh
Wire Ferrule Crimping Tool
amzn.to/4aDsmHV
Raspberry Pi 3 Model B+ Starter Kit
amzn.to/3Lb3Tig
Raspberry Pi 7 inch Capacitive Touch Screen
amzn.to/3O2VcJT
Victron Energy VE.Direct to USB Interface
amzn.to/2TbCEx4
Power Supply Raspberry DC-DC 12V to 5V 3A Micro USB Converter Voltage Step Down
amzn.to/2UE3Ftf
Raspberry Pi 3 B+ Case
amzn.to/3qt1Mf3
SanDisk Ultra 32GB microSDHC UHS-I Card with Adapter
amzn.to/3hArEBJ
Victron Energy Smart Battery Sense
amzn.to/3wXIdOp
Victron Energy SmartShunt
amzn.to/35Ufo9C
Victron Energy SmartSolar MPPT
amzn.to/3vVpWzF
Victron Energy VE.Direct to USB Interface
amzn.to/3jnvEaS
Timecodes
00:00 - Intro
01:23 - Why Multiplus II 48V?
05:12 - installation/Comnnect Wires
11:43 - Configure Multiplus II
15:02 - Connect to RPI
19:12 - Node Red Preview
20:54 - Summary
============================================================================
= AFFILIATE DISCLOSURE: This channel may earn an affiliate commission if you purchase products through links I provide.
= CONTACT: hello@tobisreallifeskills.com Business/Collaboration only. Please do not contact for personal project help, or advice.
= DISCLAIMER: These videos are documenting my own projects, and experiences. These projects, and activities can be dangerous. Do not try any of this at home, doing so will be at your own risk. - แนวปฏิบัติและการใช้ชีวิต
Perfect timing - just installed a Multiplus in our Camper Van - will be adding an RPI4 and VenusOS next
Dude you're an absolute genius and exactly the one I needed right now in front on my Victron's equipment juste saying myself "that's to expensive, let's try something with a pie!" Thank's a lot and lot of love!
Awesome this helps you! Thanks for watching and your feedback 🙂
I will be installing my 12/3000/120 2x120 soon with my Pie4 so this is all good stuff. Thanks and keep it coming please.
Thank you!
Nice! Fun fact :) Litteraly yesterday I was reinstalling my MPII + VenusOS. Open to hear your experiences!
Thanks for watching! I will share them for sure over the next weeks and months!
@@tobisreallifeskillswithtobi Thanks. Aspecially if you mind focusing on ESS Assistant. Still no so clear for me. Looks easy but I'm not sure I'm doing everything right.
Happy to see you have new blue stuff. I just got the multi-plus II and ever since I plugged in the mk3 to my pi 4 every now and then it disconnects all the devices. This was fixed for a while. I'll try the duppa part and see if that resolves my issue. Thanks a bunch for the tip
Thanks for watching! I will see how mine performs in combination with RPI
can you please when you try the combination show us feedback ?
@@tobisreallifeskillswithtobi
Hi 1stly a nice explanation of all. I think you need to reduce the absorption charge voltage to about 3.45-3.50v (55.2V- 56V) you don't want the inverter to charge your batter to the full 3.65V (58.4V) you can check the offgrid garage from Andy. He had done so many battery tests. You want the bms to be the last line of defense so u want the charging to stop before n if it don't stop then the bms will stop it.
Good call and thanks for pointing out! I just adjusted everything according to the battery manufacturer. :-)
Victron has Orion-Tr 48/12-30 (360 W) a 48-12V converter.
Thanks, let me check on this! I was not aware of it!
@@tobisreallifeskillswithtobiThey also have any number of MPPT which will view the 48v battery pack as a PV panel and charge a 12v battery very efficiently
Good guide, thanks. Why did you use the MK3 cable. Can't it be configured via raspberry pi?
wondering if the MK3-USB-C is same as a regular ethernet to usb adaptor, 60-80 $ for the victron one seems excessive,
Hola Tobi, qué sistema operativo has usado para ver la temperatura de la raspi y los datos más exhaustivos en la consola remota?
Saludos
Thanks for watching! The PRI is using VenusOS which is based on Linux. There are a lot of videos on my channel about VenusOS ;-)
@@tobisreallifeskillswithtobi hola, cómo puedo instalar ese OS en mi raspi? Quiero tener sensor de temperatura ya que donde la voy a poner hace mucho calor, así controlar que todo vaya bien. O si me puedes enviar el vídeo de cómo instalar las sondas de temperatura te lo agradecería. Un saludo y gracias por todos tus videos