Thanks for finding an alternative reed replacement. I replaced mine about 8 years ago but couldn't find a replacement now except for some sketchy web sites. I also went through replacing all the part you did the first time.
Glad it helped. The reed valve works great. Overall the compressor runs like new. It’s been a few weeks now it is still holding pressure. Builds up much faster too.
I have had this same compressor since I purchased it new sometime between 2002 and 2005. Only issue I have had is the pressure adjustment knob has a brass left-hand thread nut in it that strips out after a while. I think I replaced it about 15 years ago and now today I went to use it and the same issue happened. Some people want $49. for the knob alone but I found it for $15. Luckily I found the spring that works with it as well so I did not have to order that; people want a lot of money for that as well. It's as loud as possible but it's worked well.I'll have to remember this video if I have any other issues. I don't really know that much about compressors, I have wondered if you had an additional holding tank attacked to a compressor like this would the compressor be able to accomodate the additional volume of tank and therefore give me a longer run time between recharging?
Hey Ed my compressor comes up to full pressure and works fine. The only issue is once I use the compressor and try to turn it on it struggles to compress so much that it stalls. Could it be the check valve? Where did you find one?
Less than $20 for piston and ring and cylinder ?? Sir where can I get the same deal I have exact same compressor motor on my Coleman the motor is 5 hp manufactured by San born oh forget it you just said wrong cylinder yes I also ordered wrong one was $16 they want $156 for kit I did find one for $56 online piston cylinder and ring
Thanks for finding an alternative reed replacement. I replaced mine about 8 years ago but couldn't find a replacement now except for some sketchy web sites. I also went through replacing all the part you did the first time.
Glad it helped. The reed valve works great. Overall the compressor runs like new. It’s been a few weeks now it is still holding pressure. Builds up much faster too.
Subscribed. Always looking for new channels where people do real things in real time.
I’m currently working on one of these,between eBay and Amazon I think I found all the parts I need
I have had this same compressor since I purchased it new sometime between 2002 and 2005. Only issue I have had is the pressure adjustment knob has a brass left-hand thread nut in it that strips out after a while. I think I replaced it about 15 years ago and now today I went to use it and the same issue happened. Some people want $49. for the knob alone but I found it for $15. Luckily I found the spring that works with it as well so I did not have to order that; people want a lot of money for that as well.
It's as loud as possible but it's worked well.I'll have to remember this video if I have any other issues.
I don't really know that much about compressors, I have wondered if you had an additional holding tank attacked to a compressor like this would the compressor be able to accomodate the additional volume of tank and therefore give me a longer run time between recharging?
My motor went bad, I can’t figure out how to remove the bearing to remove the motor. Any suggestions
Good video.... but how does the cowl come off? Also... anyone know what check valve fits this?
Does yours have a drain plug?
Hey Ed my compressor comes up to full pressure and works fine. The only issue is once I use the compressor and try to turn it on it struggles to compress so much that it stalls. Could it be the check valve? Where did you find one?
You have regulator and check valve part numbers. Thanks
Hi, do you now where can I get the run capacitor for that compressor?
Does this compressor need any oil to operate ?
@@rishmallall299 no oil
Hey where'd you purchase the cylinder and piston ring
This link:
arkansas-outdoor-power-equipment.myshopify.com/collections
Need to scroll way down to find part 048-0074
Low pressure is almost always the piston ring better to buy kit like you have probably notice won’t be so loud also
Need help locating parts
What direction are the main plug threads?
Less than $20 for piston and ring and cylinder ?? Sir where can I get the same deal I have exact same compressor motor on my Coleman the motor is 5 hp manufactured by San born oh forget it you just said wrong cylinder yes I also ordered wrong one was $16 they want $156 for kit I did find one for $56 online piston cylinder and ring
where did you buy it for that price?