DOVETAIL CUTTER - EASY

Learn to make a DOVETAIL CUTTER EASY WITH TOOL BITS step to step in a simple and practical way.
Everything is made with small machinery.
I ALSO RECOMMEND THIS VIDEOS
MILLING VISE HOMEMADE⬇️
www.youtube.com/watch?v=gi50t...
MILLING MACHINE FINAL⬇️
www.youtube.com/watch?v=ss0px...
HAND WHEEL FOR LATHE OR MILLING MACHINE - HOMEMADE⬇️
www.youtube.com/watch?v=0SW16...
ANEL GRADUADO STEP TO STEP - HOMEMADE ⬇️
www.youtube.com/watch?v=UqpN3...
Do not forget to subscribe and write any question to help you.
#Dovetailcutter

[@johnmcclain3887]

Nicely done with a minimum of high accuracy tooling, good "seat of the pants engineering", something I've seen used around the world "to get things done" as needed. Thanks!

[@franciscomurciaprojects2327]

Thanks friend for that comment really use basic tool. Thank you

[@kulebyakinjoe]

A VERY USEFUL CUTTER. AND IT'S HOMEMADE, TOO!

[@franciscomurciaprojects2327]

Thank you for comment

[@user-zj9et2yd4q]

Браво маэстро! Супер!

[@franciscomurciaprojects2327]

Спасибо, мой друг, за твой комментарий

[@kwaaaa]

excellent design and looks to work great. Thanks for sharing your knowledge with others, very helpful!!

[@franciscomurciaprojects2327]

Hello, thanks for commenting, that appreciation is valuable.

[@franciscovalpassos3262]

Ferramenta eficiente, simples e de baixo custo.

[@franciscomurciaprojects2327]

Gracias amigo, si sencilla y eficiente

[@joseneriacoemel9825]

Show de bola mesmo hein laik grande tmjs

[@franciscomurciaprojects2327]

ok thank you

[@gonzalocamacho6971]

Excelente amigo. Gracias por compartir

[@franciscomurciaprojects2327]

Gracias amigo por compartir

[@rotating-alfadiq]

Nice post

[@franciscomurciaprojects2327]

ok thank you

[@rolandolievanoagudelo.5112]

Muchas gracias maestro por brindarnos sus conocimientos 👍

[@franciscomurciaprojects2327]

Gracias amigo por comentar cualquier inquietud bien puede preguntar. Saludos

[@balakrishnanacharya]

Good work

[@franciscomurciaprojects2327]

Thank you my friend

[@josemanon6295]

Excelente

[@franciscomurciaprojects2327]

Gracias por comentar. Saludos

[@sandronewman2286]

¡Buen trabajo y buen idea alomejor voy a hacer uno manana!

[@franciscomurciaprojects2327]

Gracias amigo por comentar, claro buena suerte en su fabricacion. Saludos

[@mrohny76]

świetna robota 👍👍

[@franciscomurciaprojects2327]

Thank you for sharing

[@valentim75]

Your idea is brilliant and also how it was done. Congratulations. It was just the tool I needed. Thanks so much for sharing.

[@franciscomurciaprojects2327]

Ok thank you for sharing

[@kumaresanr9321]

Excellent 👍

[@franciscomurciaprojects2327]

gracias por comentar

[@jefflyon100]

Great video, i made a similar cutter to remake the top piece of an existing dovetail slide. The part I don't understand is how you accurately grind the cutter angle so the part being made would fit any manufactured dovetail rail. I'm remaking a carraige for an existing male dovetail rail and found out it needs to be a lot more accurate than a lathe compound rest can provide. I'm out less than a 1/4 degree and trying to achieve final fit by hand scraping was an exercise in frustration. I ended up spending the $80 on a carbide dovetail cutter to keep myself from going crazy.

[@franciscomurciaprojects2327]

Thanks friend for asking, yes it is a bit difficult to achieve the perfect angle, in this case 60 degrees. but I advise you to help yourself with a used cutter that has 60 degrees and use a face gauge to achieve the exact angle, and you can do it very well.
thank you

[@markrainford1219]

For your purposes buying was the best option. If you are making the male and female parts with the same cutter, then the angle isn't important.

[@andersgrassman6583]

@@markrainford1219 Kind of true, but since you might have to regrind the tool during the job, there is some possibility / room for not so good fit. I expect there are dovetail cutters with changeable cutting tips these days?! That's the way to go unless you have a proper tool grinder - which extremely few hobbyists do.

[@ourtube4266]

@@andersgrassman6583a lot can be accomplished with a bench top grinder and a proper jig.

[@PundhyLuzino]

Menarik

[@franciscomurciaprojects2327]

Thank you for sharing

[@parvizaghayarov935]

Nice design

[@franciscomurciaprojects2327]

Ok Thank you for sharing

[@andriantoeko2895]

Good job mr. I will make this tool to. Thankyou for sharing

[@franciscomurciaprojects2327]

Thank you for sharing

[@andriantoeko2895]

My project in my second chanel " andrianto blitar " Mr

[@bahadersingh8880]

Good job 👍

[@franciscomurciaprojects2327]

Ok thank you for sharing

[@damarcastro768]

Muito bom 👍👍👍

[@franciscomurciaprojects2327]

thank you for sharing

[@ricdom2305]

Hola muy bueno el video.
El torno lo hiciste tambien?
Saludos desde Argentina

[@franciscomurciaprojects2327]

Gracias por preguntar, no, el torno es un emco compact 5. Saludos

[@Bianchi77]

Nice video, thanks :)

[@franciscomurciaprojects2327]

Ok thank you for sharing

[@hayathayat1462]

Bravo Turkey İzmir selâm 👍

[@franciscomurciaprojects2327]

ok thankyou for sharing

[@user-uk7wl8hp7e]

вещь пригодная в применении , но надо снять резец и нижний торец проточить на 2 мм и все будет окей, привет из СИБИРИ.лайк и уважуха неугамонным людям

[@channelview8854]

Very nice. And this would be very expensive to buy in USA if you could even find anything similar. I see that your toolbit appears to be ground with enough relief on the heel of the tool. To anybody without much experience I want you to be aware so the heel of the bit has adequate clearance. Thanks for sharing and greetings from USA!

[@franciscomurciaprojects2327]

Thanks for commenting, if indeed a very small space was left on the heel in order to displace the chip, it is 0.4 mm. Thank you

[@piotrnapieraa5422]

Super pomysł 👍👍👍👏🇵🇱

[@franciscomurciaprojects2327]

Gracias amigo. Saludos

[@edilsonmartins6653]

Muito bom.

[@franciscomurciaprojects2327]

thank you for your comment

[@saulsalinas6419]

Excelente idea!!! Si duda la copiaré, los cortadores son muy caros y se parten fácilmente, saludos desde México maestro.

[@franciscomurciaprojects2327]

gracias por comentar, claro que es una buena idea y se puede hacer de cualquier medida.
Gracias desde Colombia

[@erlyholguin9720]

👍👍😎

[@franciscomurciaprojects2327]

Thank you for sharing

[@qasimsakriwala]

Thankyou ❤

[@franciscomurciaprojects2327]

Thank you my friend

[@user-pt7mo2yk2d]

Esa herramienta golpea demasiado, lo ideal que tenga varios filos😊

[@franciscomurciaprojects2327]

Gracias por comentar, si por supuesto en materiales duros golpea un poco, lo ideal seria minimo dos filos, pero asi con un solo filo no hay problema en materiales blandos. Gracias saludos

[@FunnyManNsk]

Классно получилось!
А если использовать треугольные сменные пластины 16мм? 🤔

[@franciscomurciaprojects2327]

Спасибо за вопрос, конечно можно использовать треугольные вставки и они дают отличные результаты.
Фрасиас

[@jw200]

5:40
I hear and feel vibration.
Have you measured the runout and other things like bending the mill parts or its head ?
Something feels like it's not sturdy enough. Or doesn't have enough weight

[@franciscomurciaprojects2327]

thanks for comment. It may be that since it is only a burin then it generates a slight tapping when touching the material, otherwise it is fine.

[@timothytorks2761]

hi, please can any one tell me the type of jaw chuck initially used on the clip

[@franciscomurciaprojects2327]

Thanks for commenting, initially an ER 25 collet chuck was used and then to finish on the milling machine an ER 32 collet chuck was used. Thank you

[@Dancer148]

At 1:55 you use a center ruler tool.
How is it called and where did you get it from?

[@franciscomurciaprojects2327]

Thank you for asking, when you buy a universal square, it includes the square for centers. Thank you

[@Dancer148]

@@franciscomurciaprojects2327 Thanks, didn't know it existed.

[@TheMadJoker87]

not bad, but it should also have an edge on the bottom side or at least be completely flush with the holder, otherwise the tool will always end up rubbing the piece you are cutting

[@franciscomurciaprojects2327]

the tool protrudes 0.5 mm so that it can do the work on the part without touching the tool holder. thanks for the observation. Greetings

[@user-tc4mc8pi5v]

Для цветных металлов вполне пригодная штуковина! Хотя...

[@franciscomurciaprojects2327]

Thank you

[@ThisIsToolman]

Keen job of making the tool but you didn’t dial in the angle on the cutter. The next piece you make after you hand sharpen the bit won’t make a part that will fit any previous parts.

[@franciscomurciaprojects2327]

Thanks for commenting, yes of course when sharpening you can lose the angle a little but the idea is to maintain it as much as possible, and then use a new dovetail cutter. Thank you

[@absolute___zero]

so why did you make a conic tool if you could simply rotate the insert 45 or 60 degree? waste of time

[@franciscomurciaprojects2327]

Thanks, good question, but it was manufactured conical, so that when you continue removing material, the conicity or inclination of the piece to be manufactured will of course follow.
Thanks greetings

[@borys4456]

Барахло. Точность как на глаз ножовкой.

[@franciscomurciaprojects2327]

thank you for sharing