utensile per spianatura fai da te, realizzato con un utensile da tornio sinistro, quindi il fly cutter deve girare al contrario per avere il tagliete dalla parte giusta
Nice cutter. Only change i would make would be more sat screws, spaced closer together. It holds better, plus allows you to clamp short pieces of tool steel. You can also extend your inserted cutting further to cut larger resurfaces.
I need a fly cutter but had never thought of making one, I love the idea of using an insert tool it but why did you off set the cutting point off from the rotation center?
Great to see sombody just jump in and get the job done. - If +/- 3 degrees is OK, then make it +/- m3 degrees and leave the Sine Bar in the tool box. - If a slot needs to be +/- .010, make it +/- .010 and leave the adjustable parallels next to the Sine Bar. - I think most people on You tube want to show you just how to do extra and unnecessary work. - This thing works like a charm and took 1/4 the time the "right" way would take. GOOD JOB!
As a machinist back in the day ! I enjoyed watching the fabrication of the fly cutter ! Noticed as I’m sure many others did the same ! The stud was welded in then turned to clean up ! To my amazement why didn’t he saw extra length and turn the shaft on to the blank ? Other than that it turned out very neat as I see the completion !
Mate, I am not a machinist and I am not sure if I missed something, but I would feel very vulnerable using your nicely crafted fly-cutter. Please please drill holes into the tool holder so that the set-screws provide an extra degree of physical security instead of relying on the friction between the screws and the flat side of the tool holder. If the tool holder should become loose, it would become a potentially lethal projectile. Otherwise, nice work.
I can't tell you how many times over the years i've used a fly cutter just like this one. The set screws are plenty enough to hold the tool holder in place.
That was my first thought as well. I added my questions on top of the comments before reading your observations. Moreover to me any fly cutter based on the same principle of construction looks dangerous. However they use them all the time...
É incredibile, penso che oramai abbiamo abbandonato il livello hobbistico da un bel po' , io lavoro ogni giorno con professionisti che tu surclassi per precisione e pulizia, non é che segua proprio tutti i maker, ma per me sei il numero uno.
premesso che lavorare su queste macchine è da considerarsi sempre pericoloso, ma devo dire che si comporta molto bene, è abbastanza bilanciato e non fa vibrare la macchina quindi direi che è ok
@@thedacchio infatti si vede che non si muove niente.. Praticamente perfetto. Pensavo a chi ha attrezzature con giochi e flessioni.. Meglio che non lo copino a mio avviso
È sempre un piacere vederti lavorare, grande precisione, complimenti!!!
Back the front, but just run it backwards. Nice job.
Bravo e preciso; come sempre è un piacere vederti lavorare
Excelente herramienta! Un gran trabajo!!!
Ottimo lavoro, come del resto tu ci hai abituati a vedere, bravissimo
Pazzesco,forse il più bel progetto.Complimenti
Rimango sempre affascinato dalla tua precisione. Complimenti
Grazie :)
I remember making a fly cutter as one of my first graded projects in high school. Then parallels then 123 blocks.
The good O'le days
Come sempre ottimo lavoro 👍
Super lavoro complimenti
Grande ottimo lavoro, rifinitura professionale
excelente video!!! saludos desde Argentina!!
Damn that's nice. I always used fly cutters as a machinist. Totally different cutting aluminum vs steel
What's the benefir of a fly cutter over a normal mill?
@@Etherion195 Better surface finish.
@@TalisonElvira thanks.
Nice cutter. Only change i would make would be more sat screws, spaced closer together.
It holds better, plus allows you to clamp short pieces of tool steel.
You can also extend your inserted cutting further to cut larger resurfaces.
Ottimo lavoro 👍
Hi very nice looking flycutter, just one problem though it's left-handed.
Que Excelente idéia, parabéns, vou tentar copia-lo .
A very conscientious and meticulous work, as always!
Was waiting to see a fly get cut in half. Lol.
Sempre il numero 1, iscritto da quando suonavo con i Parasitz!
uno dei migliori gruppi mai esistiti a Pianella :)
Классная штука получилась а она не вылетит? вроде и зажата не плохо но все же
Semplicemente alta precisione.....👍👏👏👏👏
Grazie :)
Cool work 👍
Sempre molto professionale....complimenti!!!!!
Grazie :)
well done.Excellent work
Good job man!
Looking good!
Idéias básica e ótimas de um bom profissional, parabéns
Grandiosa idea 👍🏻
Awesome ,great skills dude
Exelente video, acabo de encontrar el canal y es muy bueno, tu laboratorio es muy similar al mio.
Saludos desde Argentina!
Video come al solito ben fatto e molto interessanti i contenuti.. the dacchio 6 bravissimo!
Grazie :)
Wow, nice! Thanks, greatings from the netherlands.
Complimenti!!! bel lavoro...Bravo...!
Grazie :)
Bravo beautiful job. What metal did you use?
I need a fly cutter but had never thought of making one, I love the idea of using an insert tool it but why did you off set the cutting point off from the rotation center?
I do machining and automotive repairs. So i take the used engine oil and use it as cutting oil, its free.
caramba que da hora parabéns pela ideia !!!!
Job well done, great info.
Gran trabajo. Una pregunta nada más. Cuántos grados de inclinación tiene?
I’ll be making one here soon ,thank ya
Niice job! What is tool installing angle you choosed? I'm thinking about 10-15 degrees, but not sure...
Great to see sombody just jump in and get the job done. - If +/- 3 degrees is OK, then make it +/- m3 degrees and leave the Sine Bar in the tool box. - If a slot needs to be +/- .010, make it +/- .010 and leave the adjustable parallels next to the Sine Bar. -
I think most people on You tube want to show you just how to do extra and unnecessary work. - This thing works like a charm and took 1/4 the time the "right" way would take.
GOOD JOB!
Yup. That’s real nice!
Larry
Grandissimo DACCHIO se vai a comprare un utensile del genere costa un botto, bravo bravo
lo so, infatti la maggior parte delle persone se lo costruiscono :)
Хорошо получилось! Очень практичная оснастка
Good job, thanks😎😲🤓
Ottimo lavoro!Complimenti!Si potrebbe usare anche sul tornio....
Hi, it's a very good job, and a good idea...
con un taller bien equipado construyes maravillas.
Excelente trabalho 👏👏👏👏👏
Looks so cool nice work
Que show amigo.
Bravo, work of arts
Nice Tool 👍👍👍
good job!
thanks bro :)
If made in poland gives you a comment its good trust me lol
PO BEJN SURE THUI AFITOS ç
Sei un grande veramente bravo i mie complimenti
Grazie :)
Nice work. Could use an extra set screw. Curious why it's setup to run anti clockwise?
Muito legal gostei da ferramenta 👍
Nice job! What degree angle did you put on the bottom of the tool please?
Sempre un grande
👍
Grazie :)
Nice video, nice music, nice project. Is the video background music available on TH-cam?
As a machinist back in the day !
I enjoyed watching the fabrication
of the fly cutter ! Noticed as I’m
sure many others did the same !
The stud was welded in then turned
to clean up ! To my amazement why didn’t he saw extra length and
turn the shaft on to the blank ?
Other than that it turned out very
neat as I see the completion !
I'd guess far less waste material this way, and less wear on the cutting tools.
Grande Lorè! Ti seguo da quando avevi il codino!
bei tempi Paolo...ahahah
That's art.👏
Mate, I am not a machinist and I am not sure if I missed something, but I would feel very vulnerable using your nicely crafted fly-cutter. Please please drill holes into the tool holder so that the set-screws provide an extra degree of physical security instead of relying on the friction between the screws and the flat side of the tool holder. If the tool holder should become loose, it would become a potentially lethal projectile. Otherwise, nice work.
Exactly my thoughts!
I can't tell you how many times over the years i've used a fly cutter just like this one.
The set screws are plenty enough to hold the tool holder in place.
Yeah you kind of answered your question in the first sentence.
That was my first thought as well. I added my questions on top of the comments before reading your observations. Moreover to me any fly cutter based on the same principle of construction looks dangerous. However they use them all the time...
@paultrgnp there is no need, the set screws will hold it fine
Good work 👍
Hello good Job, which steel it's used for the fly cutter? ty
Ein schöner Schlagzahn 😀. Vielleicht noch eine Vertiefung für die Schrauben im Drehmeißel anbringen.
Ein Schweizer ?
احست بارك الله فيك.فكرة جميلة
Che piu bello lavoro
Fantastico, ottimo lavoro Lorenzo
Grazie Marcello :) scommetto che non vedi l'ora di prendere una fresa per farne anche tu uno :)
Nice. Aa low cost havy cutter
É incredibile, penso che oramai abbiamo abbandonato il livello hobbistico da un bel po' , io lavoro ogni giorno con professionisti che tu surclassi per precisione e pulizia, non é che segua proprio tutti i maker, ma per me sei il numero uno.
grazie :)
Muy bueno, pero lo veo peligroso que pueda escapar, poco agarre con dos tornillos. Debería tener una traba me parece, saludos.
Haja inteligência parabéns...
Amigo, cuántos grados de inclinación para la cuchilla? Gracias
Nice job
Very well done ! Now I only need a milling machine, Hehehe ! Thanks for sharing !
But first I need money
th-cam.com/video/gS_d7ndIJFc/w-d-xo.html
רששששששש ש'ה
ם של כל רב כ, ב
bravo .. que velocidad huzaste en cortar la pieza en tu drill .. saluti dai messico
Espectacular 👌excelente rectificadora en plano
Can i use this in CNC milling? Or calibration to be needed?
Молодец мужик... Отлично получилось 👍👍👍👍👍
You can also use this to make holes
Wowwwwww non c'è altro da dire!!!!!!
Grazie :)
ficou ótimo essa fresa.
Bel lavoro. Che fresa è quella che usi?
Good tool consept
Can u have detailed drawings for manufacturing tool holder??
This is magnific.
Good job
How come your mill spindle turns anticlockwise?
muito bom parabens
um forte abraço
Perfect.
Ever heard of coolant?
Great job, by the way!
Very awesome.
Love your videos dude. We're are the NEW ONES? Lol. Keep them coming man be safe
Homemade? Qual é a HOME que tem equipamento pra MADE isso aí? Rs...
Nice brothers,i'm school in mechanical engineering
Well you know you should spend a good 5 years hand on. Even if its setting up cnc mills . Practice trig and cad. Get used to 3d mastcam softwear
Yeah 5 years is a short time and needs full concentration
Talaş sana geliyo ters yapmışsın kardeşim barayı olmazzzz
Was good but its very dangerous
Wow wonderful
Livello di precisione altissimo... Fantastico.. Se cosi non fosse mi da l'impressione di essere un po pericolosetto.. 👍
premesso che lavorare su queste macchine è da considerarsi sempre pericoloso, ma devo dire che si comporta molto bene, è abbastanza bilanciato e non fa vibrare la macchina quindi direi che è ok
@@thedacchio infatti si vede che non si muove niente.. Praticamente perfetto. Pensavo a chi ha attrezzature con giochi e flessioni.. Meglio che non lo copino a mio avviso