@@TritonusRaven i have Budokai tenkaichi 3 on my switch using the andriod emulator it doesnt run as smooth am i doing somthing wrong or no or should i go to Ubuntu
can you try running Shin Megami Tensei: Digita Devil Saga, I've been thinking of playing it on the Switch but don't know If I should proceed with emulating it.
Does Klonoa 2 run well? The remaster on switch kinda ruined the lighting and the game is kinda notorious for being difficult to emulate on ps2 emulators
I have actually tested games before seeing this video and I can say that god of war games run perfectly. But one question, how did you get Drastic on Ubuntu?
I also do, it is the best way to play ds games but in minute 2:29 you have a drastic icon in your taskbar and that really got me wondering how to use the emulator on ubuntu.
Great video! I have question did you overclock the cpu: 2ghz and ram:1862 mhz? Because as far as I'm aware the gpu on Android cannot be overclock is limited to 400 mhz.
Hey dude, from the ubuntu is clearly more faster for some games. My question is I doing some partition for my sd card for Emummc, but I don't know what to do if I wanna install Ubuntu for my switch, what happen to my emummc if I doing a Partition for Ubuntu?
Could you test Resident evil outbreak? If it plays near perfectly it should be possible to link the game to the private network if aether supports it and would mean it's possible to play online, on the go
Perhaps I'll make a Short about it. After running L4T-Megascript run this command from the same directory that the file is in: sudo flatpak install --system ./com.aethersx2.aethersx2.flatpak
what's up bro, sorry to bother you, but i've been wondering how you got such a good performance in tenkaichi 3, even in ubuntu it's bad! Could you send me the configurations and the emulated version if it weren't too much trouble? If you want, you can send me both (ubuntu and switch) or the one that you think best runs, also, you are making it oveclock right? If so, is it at the maximum frequency?
Hey! These are my settings: EE Cycle Rate: 50% Enable Frame Limit: On Turbo Speed: 120% GPU Renderer: Vulkan Upscale Multiplier: 1.25x Native As for the frequency on Ubuntu I'm using Perf OC All.
@@TritonusRaven I know it's a bit annoying for me to ask, but I do want to have the same performance as you xd, do you have a discord channel to communicate or something similar, of course as long as it's not a bother for you, thank you very much
Yeah everything else is on default. I'm using ntsc but I don't think there's a big difference from pal. If you need further assistance I'd suggest you join the Switchroot Discord.
@@TritonusRaven I know about this video, but I have a problem with the first command, I think I wrote it wrong. I'm asked for a password, but I can't enter it (using Linux in a portable). Could you please write all the necessary commands in a comment? I don't really understand from shorts how to write them. And yes, can you tell me how to convert from portable to stationary mode from linux?
Check if you have hardware acceleration by running: sudo echo $FLATPAK_GL_DRIVERS which should be nvidia-tegra-32-3-1 and flatpak list --runtime will have an entry for org.freedesktop.Platform.GL.nvidia-tegra-32-3-1 You install flatpak by running this command: sudo flatpak install --system ./com.aethersx2.aethersx2.flatpak
i call bull, dbz bt3 does not run good on the switch, man every video of urs on this ps2 switch thing has no info no links to anything, no proof no anything, just fals claims
Thumbs up for mentioning shadow hearts, one of the best underrated JRPG series ever made, SH2 is my favorite ps2 rpg even over ff10 and 12.
Yeah it always get overlooked by the FF games when it comes to jrpgs for the ps2
What game is it at 3:03 with the man running down the street, after the people on the ship game? Please
That's Shadow Hearts: From the New World.
Great video!
Thanks man appreciate it!
thats insane, so luckily that dbz game runs flawlessly. One of the reasons i wanted to put the emulator on there
Yeah all of the Budokai and Tenkaichi games runs at almost full speed.
@@TritonusRaven W
@@TritonusRaven i have Budokai tenkaichi 3 on my switch using the andriod emulator it doesnt run as smooth am i doing somthing wrong or no or should i go to Ubuntu
Do you have Performance Mode on? You can check out the settings I use in this video th-cam.com/video/Luw85m69Kmk/w-d-xo.html
It's like the #1 game I want to download
Can you test the .hack sign games
Mortal Kombate Armageddon that was one of my favorites as a kid, nd silent hill 2, or Bully or red dead redemption 2
I think you mean Red Dead Revolver but yeah many great games for the ps2.
can you try running Shin Megami Tensei: Digita Devil Saga, I've been thinking of playing it on the Switch but don't know If I should proceed with emulating it.
It's on the list and will be featured in the next video!
@@TritonusRaven big thanks
Does Klonoa 2 run well? The remaster on switch kinda ruined the lighting and the game is kinda notorious for being difficult to emulate on ps2 emulators
Will need to check it out!
Can run gran turismo 4 and bully ?
Hello
Please a remap buttons tutoriel on Switch Ubuntu
My dream is play god hand and viewtiful joe on my switch 😬
I have actually tested games before seeing this video and I can say that god of war games run perfectly. But one question, how did you get Drastic on Ubuntu?
Actually I'm running DraStic on Android.
I also do, it is the best way to play ds games but in minute 2:29 you have a drastic icon in your taskbar and that really got me wondering how to use the emulator on ubuntu.
@@TritonusRaven any answer to this issue please?
Just search download link for aarch64 version of DraStic and use it.
Great video! I have question did you overclock the cpu: 2ghz and ram:1862 mhz? Because as far as I'm aware the gpu on Android cannot be overclock is limited to 400 mhz.
Thanks man appreciate it! I activated Performance OC All on Ubuntu and on Android I used Performance Mode which overclocks the Switch to 1.78 GHz.
Hey dude, from the ubuntu is clearly more faster for some games. My question is I doing some partition for my sd card for Emummc, but I don't know what to do if I wanna install Ubuntu for my switch, what happen to my emummc if I doing a Partition for Ubuntu?
You need to do a new partition so your emummc installation will be gone. You can make a backup, create a partition and move back your installation.
what config u used to play ape escape ?
50% Cycle Rate and Moderate Underclock.
So... You're telling me i can have a portable BT3 competitive setup
Only one way to find out.
Have you checked out the performance of the new Lakka version? It’s been a long time since the last release
Not yet. Perhaps I'll do a video of it someday.
@@TritonusRaven did I miss the video about testing lakka cos I'm also interested to know if lakka is better than Ubuntu or android
Batocera would run similar to ubuntu since it is base on Linux?
Theoretically probably yes. Does anyone want to put the time into it right now? Probably not.
Could you test Resident evil outbreak? If it plays near perfectly it should be possible to link the game to the private network if aether supports it and would mean it's possible to play online, on the go
Might check it out someday.
Do you know how does Tales of Abyss runs on the Switch?
No I would need to check it out.
Hy ps plus premium works on Ubuntu nintendo switch via wine ?
No Wine is only built for x86 and x86_64 architectures.
@@TritonusRaven thank you for real!
Sir i have my android installed already, can i install unbuntu as well? Without ruining my android?
Yes you can with dual boot but you need to make a backup of your Switchroot Android.
@TritonusRaven thankyou sir.
can you show us how to install the emulator on ubunto on nintendo switch
Perhaps I'll make a Short about it. After running L4T-Megascript run this command from the same directory that the file is in: sudo flatpak install --system ./com.aethersx2.aethersx2.flatpak
Can you run Bakugan battle brawlers and Yu gi oh gx ?
Will check out when I can.
Sir what soc is equivalent on switch?
The Tegra X1 SoC in Nintendo Switch is equivalent to the Intel Core i5-7287U.
can you try Mortal Kombat Armageddon?
Will do when I can.
so which one is better now in big 2024?
You'll get more frames with AtherSX2 flatpak but Android has touchscreen function so it's whatever you prefer.
which emulator are you using for ps2 on switch android?
I'm using AetherSX2 v1.4-3060.
Who is the character on the thumbnail?
That's Seong Mi-Na from Soulcalibur.
which android did you use and how did you increase the clock?
Android Tablet. Activating Performance Mode increases the clock speed.
@@TritonusRaven android 9 or 10?activate performance Mode where?config?
Android 10. Settings > System > Advanced > Display and Performance Configuration > Performance Mode
@@TritonusRaven thanks my friend, what android do you recommend? 9 or 10? do you have a preference for emulation?
Android 10 is great for emulation.
Retroarch switch can ps2?
what's up bro, sorry to bother you, but i've been wondering how you got such a good performance in tenkaichi 3, even in ubuntu it's bad! Could you send me the configurations and the emulated version if it weren't too much trouble? If you want, you can send me both (ubuntu and switch) or the one that you think best runs, also, you are making it oveclock right? If so, is it at the maximum frequency?
Hey! These are my settings:
EE Cycle Rate: 50%
Enable Frame Limit: On
Turbo Speed: 120%
GPU Renderer: Vulkan
Upscale Multiplier: 1.25x Native
As for the frequency on Ubuntu I'm using Perf OC All.
@@TritonusRavenand I suppose that the other configs are in default, which version do you recommend, pal or ntcs?
@@TritonusRaven I know it's a bit annoying for me to ask, but I do want to have the same performance as you xd, do you have a discord channel to communicate or something similar, of course as long as it's not a bother for you, thank you very much
Yeah everything else is on default. I'm using ntsc but I don't think there's a big difference from pal. If you need further assistance I'd suggest you join the Switchroot Discord.
Which resolution did u use?
I set Upscale Multiplier to 1.25x Native.
Needs to see Mk Armageddon on it
Will need to check it out!
How to install AetherSX2 flatpak?
th-cam.com/users/shortsgRz2VyenQGg?feature=share
@@TritonusRaven I know about this video, but I have a problem with the first command, I think I wrote it wrong. I'm asked for a password, but I can't enter it (using Linux in a portable). Could you please write all the necessary commands in a comment? I don't really understand from shorts how to write them. And yes, can you tell me how to convert from portable to stationary mode from linux?
Check if you have hardware acceleration by running: sudo echo $FLATPAK_GL_DRIVERS which should be nvidia-tegra-32-3-1 and flatpak list --runtime will have an entry for org.freedesktop.Platform.GL.nvidia-tegra-32-3-1
You install flatpak by running this command: sudo flatpak install --system ./com.aethersx2.aethersx2.flatpak
is your switch v1?
Yes it is.
@@TritonusRaven what will happen if i use switch v2 to download android? is it okay? what the different?
You need to install a modchip or else it won't work.
@@TritonusRaven so i only can install mod chip on switch v1? and v2 cant?
If you have an upatched V1 model you don't need a modchip. Only patched V1 models, Lite and OLED need a modchip.
Can you test god hand?
Sure I'll check it out.
Need for speed underground 2
Already tried it here th-cam.com/users/shortsPNDCtNhJmZs?feature=share
Pls thanks
i call bull,
dbz bt3 does not run good on the switch,
man every video of urs on this ps2 switch thing has no info no links to anything, no proof no anything, just fals claims