😃Perfect! Thanks so much. Never considered that the ignitor could be glowing and still not have enough heat to trip the on the gas valves. Time to find the parts now. Excellent presentation and explanation. Thanks much again,.
I rock with this guy I've been remodeling a house I inherited and I've based a lot of my choices on his videos. I reached out to him for advice on products and he responded quickly. Surprised he doesn't have more subscribers.
Thanks for the great video! I have a similar speed queen and Just wanted to add my experience that may help others, that although you mentioned you rarely, if ever, replace the flame sensor it was actually the part that failed on my unit. My symptoms were that the igniter would light up at start up as it should but the flame would not ignite for 2 or 3 minutes, sometimes longer. If the door was opened during the cycle, the flame may not come on again although the igniter would still be glowing. When the flame did ignite it would stay lit the whole cycle until near the end of the timed dry. The flame sensor had continuity on multimeter (although had a rattle inside when I removed it that the new sensor did not have), but still was working incorrectly intermittently. I initially thought it was the coils, but replacement coils had same effect. Dryer now flames up at about 15 seconds after start up with the new flame sensor and dryer now working as it should.
Wow!! Thank you so much for your sharing your experience!!! As you mentioned it. In 18 years dealing with this Speed Queen dryers, I have never ever replaced one. Happy new Year!!!
Very good. I replaced the solenoid gas valves but still no heat. So now I will order and replace the igniter. If that doesn't work I replace the sensor I guess and or thermal fuse. Appreciate the good video...as I own a Speedqueen washer & gas dryer.
Alex, my gas dryer does not fire up. It tumbles but the "In Use" light on the top control console lights up Red not Green. Thoughts as to the issue? Thanks -Robert
Alex tengo mi speed queen dryer de gas y no quiere calentar todo trabaja pero no calienta será el igniter también el igniter si se pone bien rojo pero como que algo no prende
Hello Alex, I want to ask. what is the maximum temperature of the thermostat for speed queen? Because there are a lot of fake spare parts in my country which causes my dryer temperature to be too hot
Hola Mr Garcia, Next to the ignitor there is device that measures the intensity of the igniter. (the flame sensor) When old or broken the ignitor still glows but not strong enough. If the flame sensor is not happy with the intensity of the igniter it will not close the circuit to the gas valve.
Hi, So helpful videos. Alex, I have a question for you. How about Speed Queen commercial Dryer model# SDGT09WF ignitor is compatible with 510184 ? Appreciate you~
Hi Alex - When I unplug the dryer and plug it back in, I get dr 04.00 DS flashing and I cannot power up the machine. Any idea what that is? Thanks! It's a residential stacking washer/dryer. It goes off after a while and I can use the machine Strange...
Hello Frank, Im sorry you are having troubles with your dryer. You have to trace back where the fault is. Watch this video. Im sure is going to help you a lot.th-cam.com/video/vvYuddaqZDI/w-d-xo.htmlsi=fvHHO2CoBiYzNoQH
Hi Alex. I have the same machine at home, the ignitor glows, then it fires up, after 10 min the fire stops and the ignitor turns on and off on and off and only some times the gas will relight. Is this how dryers work or should the fire stay on the whole cycle? Please help :). Thank you
Hello, God Bless!!! What about Jesus? Jesus saves! Look at this video. It looks like the valve coils. Let me know what you think.th-cam.com/video/3m1aJq8fMMI/w-d-xo.htmlsi=1wMt3gMGSwBe_KMZ
@@alexthehandyman3494 Haha, Amen brother! Yes He does : ). Alex, thank you very much. I watched that video and I'm pretty sure you are correct! I'll be looking for these parts on the alliance website or a local parts house. Thanks again. I appreciate how thorough you are. You are a GREAT teacher, I followed your trouble shooting very easily. May God bless your business as you have blessed many of us.
I might add, ohm the coils, if you get continuity on the unplugged coil terminals.... all checks out but no flame the gas valves may be stuck to the valve body. This happens if water gets inside the gas valve... then it is best to change the valve....
The component you have never change...I believe if not mistaken is a flame senor, it insures the HSI(Hot Surface Igniter) is working before sending voltage to open gas vavle...but I like the trick of not removing the bracket...
@@juanamaya9129 I replaced 2 valve coils, but still no heat. The igniter glows but no gas flows. I think the problem is the igniter? Does that make sense? I am in a foreign country so parts are a little more difficult to get.
Thank you Alex. This saved me at least $200 dollars. Your videos are awesome. Thank you for taking the time to make them.
Thank you so much Mark!!! Just so you know I have tons of videos on Speed Queens. Happy New Year. Please dont forget to like and subscribe.
😃Perfect! Thanks so much. Never considered that the ignitor could be glowing and still not have enough heat to trip the on the gas valves. Time to find the parts now.
Excellent presentation and explanation. Thanks much again,.
My pleasure. Remember ignitors are very fragile.
FYI I have tons of videos on speed queen washers and dryers. Please dont forget to like and subscribe
I rock with this guy I've been remodeling a house I inherited and I've based a lot of my choices on his videos. I reached out to him for advice on products and he responded quickly. Surprised he doesn't have more subscribers.
This literally saved me $150-200. Much obliged.
Thank yo so much. I bit late. Sorry. happy new year!!
@alexthehandyman3494 wonderful New Year to you too!
Thanks!
thank you so much! saved $300 and time. I just changed the coils and works greatly. Thank you again!
My pleasure. Thank you. Don’t forget to like the video. FYI I have a couple dozen videos on SPEED QUEEN
Thanks for the great video! I have a similar speed queen and Just wanted to add my experience that may help others, that although you mentioned you rarely, if ever, replace the flame sensor it was actually the part that failed on my unit. My symptoms were that the igniter would light up at start up as it should but the flame would not ignite for 2 or 3 minutes, sometimes longer. If the door was opened during the cycle, the flame may not come on again although the igniter would still be glowing. When the flame did ignite it would stay lit the whole cycle until near the end of the timed dry. The flame sensor had continuity on multimeter (although had a rattle inside when I removed it that the new sensor did not have), but still was working incorrectly intermittently. I initially thought it was the coils, but replacement coils had same effect. Dryer now flames up at about 15 seconds after start up with the new flame sensor and dryer now working as it should.
Wow!! Thank you so much for your sharing your experience!!! As you mentioned it. In 18 years dealing with this Speed Queen dryers, I have never ever replaced one. Happy new Year!!!
Very good. I replaced the solenoid gas valves but still no heat. So now I will order and replace the igniter. If that doesn't work I replace the sensor I guess and or thermal fuse. Appreciate the good video...as I own a Speedqueen washer & gas dryer.
+1 for the tip on removing the igniter!
Great video! Thanks Alex!
Great Video. Thank you for sharing
Thanks for sharing Alex, God bless and hope all is well
Great explanation. Thank you!
Thank you so much!
thanks very much sir for sharing,God bless.
Alex, my gas dryer does not fire up. It tumbles but the "In Use" light on the top control console lights up Red not Green. Thoughts as to the issue? Thanks -Robert
Alex tengo mi speed queen dryer de gas y no quiere calentar todo trabaja pero no calienta será el igniter también el igniter si se pone bien rojo pero como que algo no prende
Do you offer personal coaching and tutoring for people who want to take your knowledge to the next level?
Hello Alex, I want to ask. what is the maximum temperature of the thermostat for speed queen? Because there are a lot of fake spare parts in my country which causes my dryer temperature to be too hot
How could it be the ignitor if the ignitor was glowing / lighting up?
Hola Mr Garcia,
Next to the ignitor there is device that measures the intensity of the igniter. (the flame sensor) When old or broken the ignitor still glows but not strong enough. If the flame sensor is not happy with the intensity of the igniter it will not close the circuit to the gas valve.
Hi, So helpful videos. Alex, I have a question for you. How about Speed Queen commercial Dryer model# SDGT09WF ignitor is compatible with 510184 ? Appreciate you~
Hi Alex - When I unplug the dryer and plug it back in, I get dr 04.00 DS flashing and I cannot power up the machine. Any idea what that is? Thanks! It's a residential stacking washer/dryer. It goes off after a while and I can use the machine Strange...
1Hello. Im sorry I dont have a solution for you. Im not familiar with that product. I only deal with commercial simple speed queen. Thank you so much
And I need a new multimeter. What kind is that?
Hi Alex, I'm not getting any power to the igniter on my speedqueen dryer. Help!
Hello Frank, Im sorry you are having troubles with your dryer. You have to trace back where the fault is. Watch this video. Im sure is going to help you a lot.th-cam.com/video/vvYuddaqZDI/w-d-xo.htmlsi=fvHHO2CoBiYzNoQH
@@alexthehandyman3494 Thanks
Hi Alex. I have the same machine at home, the ignitor glows, then it fires up, after 10 min the fire stops and the ignitor turns on and off on and off and only some times the gas will relight. Is this how dryers work or should the fire stay on the whole cycle? Please help :). Thank you
Hello, God Bless!!!
What about Jesus? Jesus saves!
Look at this video. It looks like the valve coils. Let me know what you think.th-cam.com/video/3m1aJq8fMMI/w-d-xo.htmlsi=1wMt3gMGSwBe_KMZ
@@alexthehandyman3494 Haha, Amen brother! Yes He does : ). Alex, thank you very much. I watched that video and I'm pretty sure you are correct! I'll be looking for these parts on the alliance website or a local parts house. Thanks again. I appreciate how thorough you are. You are a GREAT teacher, I followed your trouble shooting very easily. May God bless your business as you have blessed many of us.
I might add, ohm the coils, if you get continuity on the unplugged coil terminals.... all checks out but no flame the gas valves may be stuck to the valve body. This happens if water gets inside the gas valve... then it is best to change the valve....
Coba pakek yg ini bosqu
Tanpa igneter
th-cam.com/video/__rx5_1NOXo/w-d-xo.htmlsi=IetpjmoS4dQ9WZlz
Flame sensor
Hola Juan What are you talking about. Greetings!1
The component you have never change...I believe if not mistaken is a flame senor, it insures the HSI(Hot Surface Igniter) is working before sending voltage to open gas vavle...but I like the trick of not removing the bracket...
@@juanamaya9129 I replaced 2 valve coils, but still no heat. The igniter glows but no gas flows. I think the problem is the igniter? Does that make sense? I am in a foreign country so parts are a little more difficult to get.