How I made this doghouse for my husky for under $100!
ฝัง
- เผยแพร่เมื่อ 30 พ.ค. 2020
- Check out how I created this simple DIY custom dog house for my Siberian Husky Ghost for under $100! He does not like the water, and I wanted a cool place for him to be able to get out of the sun while we are hanging out down by the pool.
I am not an expert woodworker by any means, but I am extremely satisfied with the way that this build came out. The only thing I have left to do is stain, or paint and seal it. I am not quite sure how I want to finish it yet. If you have any suggestions please leave them in the comment section.
Material List
Pressure treated 2x4's (Base only - nothing where the dog might chew on)
Regular 2x4's (the 4 posts)
Plywood (the floor and the roof)
Wooden Siding (the 4 sides of the house)
Scrap Poplar (to frame the windows/Doors)
Roof Shingles
Screws
Construction adhesive (for trim pieces and the shingles)
Plans for Sale:
payhip.com/TheWoodworkingHusky
Get a free stock from Robinhood worth up to $500 when you sign up today!
join.robinhood.com/matthem-7c...
Check out my other videos on other projects I make for Ghost!
• Dog Projects
Thanks for watching this! If you liked the video, please give it a thumbs up, and subscribe to my channel for more content.
AFFILIATE LINKS / NOT SPONSORED
Camera
Nikon d3200 - amzn.to/2X0u16P
Nikon 18-55 mm lens - amzn.to/3aWGmkv
Tools
10in Compound Miter saw - amzn.to/2KLbrgC
7 ¼ circular saw - amzn.to/352t3vj
Band Saw - amzn.to/34ZbRqz
Belt and Disk Sander - amzn.to/3o42lK4
Nail Gun - amzn.to/382SBtT
Router - amzn.to/3b5NET4
Planer - amzn.to/3n2MSZl
Drill and Driver Kit - amzn.to/352H9N7
Pocket Hole Jig - amzn.to/3pGeHbL
Music: www.bensound.com - แนวปฏิบัติและการใช้ชีวิต
Finallllllly a DIY dog house that doesn't require like a dozen tools. Thanks!
But requires over a grand in tools
No lie. Just make it taller than he did. Poor dog as no room to stand.
@@nervonabliss2071except you can do this with just a circular saw. I got a nice table saw from a pawn shop for $125. You don’t need expensive tools.
My big pup likes a ton of room. He loves having space. He’s a 100 lb German Shepherd and I’m going to measure his XXL crate and make his future home that size with your instructions. Thank you so much for posting this! I’ve looked all over the place online for a house big enough for him and everything is way overpriced and not wide or tall enough for him to walk into. After seeing him ignore his igloo shaped home, I’m now going to fly to Home Depot and finally make him a custom home! Our dogs deserve a safe and comfy home too!! ♥️🐶🐶♥️
Aww that's so great to hear! I looooove German Shepherds! I almost got one, but the second I saw Ghost, I knew he had to come home with me! Let me know how your build goes!!
How was it?
I’m about to get a German Shepard puppy 😂 I was looking for this comment, took 1 second lol.
I only have a saw and wood. Still gonna try this . Wish me luck
Best of luck! Let me know how it turns out!
Amazing confidence!! Do let us know how it turned out. Would love to see
Did it work
How did it come out?
This comment was 5 months ago how did it go
I have made several but I will try this one it looks pretty easy!
What a handy man:)
very nice job! thanks for the inspiration!!
Thank you so much!
Awwww. Love the video and big puppy looks as is he loves his new little house.
Thank you so much! Ghost loves hanging out in there! He would do his typical routine - spin around 800 times and then plop right down. The best was when one of his puppy friends came over; Ghost was laying down, and the other dog stuck his head right through the front window!
@@thewoodworkinghusky3284 lol thats a lovely dog house, if i came over i would stick my head right thru the window too. Lol
Great job
Great Job!! I''ve been looking at videos to build a dog house for my dog. I think I will go with this one, it doesn't look too difficult! Thanks for the video!
That's awesome! Yeah it was super simple to do, the hardest part was finding the time to make it haha. You gotta let me know how it comes out! I hope the pup loves it!!!
Helluva job brotha!👍 Keep up the good work!
Thank you so much!!!
Good job...thanks for posting
Thanks for watching!!
Thanks so much for this video.
Thank you for watching! Are you planning on making a house for your pup!?
@@thewoodworkinghusky3284 Yes, thanks to you!
Nice Chihuahua dog house for a husky dog house
love it thanks
I'm trying this one!
Awesome! Good Luck!
I wish I had a dog to build one of these for. Hey, my neighbor has a dog and he does a ton of things for me. Wouldn;t it be cool to surprise him and set one of these in his driveway?
That would be incredible! Talk about a surprise, I'm sure the dog would love that!!! What kind of pup is it?
Did you do it?
It's a cool dog house for my 3 lb yorkie, but kind small for a husky!!
You motivated me.
Glad to hear it!
I'm only 5:05 mins into your video and I started cutting my boards. Half way done with the cutting now to watch the rest of your video.
love it! Hope it came out awesome!
Excellent video. Clear as a bell. Next video please edit: we don't need to see every saw cut. I do appreciate your hard work. Thank you.
Building this now. The plywood alone gonna cost more than $100 for me. Luckily I’m using scraps so far.
One the easiest builds I’ve seen. I like it. My only issue is it’s not tall enough. Huskies already have health issues I feel this would only add to it.
Love it man, awesome 👏🏼
thank you so much!
I would’ve put some one by twos around the edges of the roof, cover up the siding.
This makes a good chicken/duck coupe for chickens laying eggs
Definitely can be easily adapted for that!
I wish you were in atlanta
Hey there great build! Id like to know what angle was used on the roof? And how much sorter the front legs were than the back? Thanks 🙏🏾
The angle was kind of arbitrary! When I was designing it, I just picked something that I thought looked nice. I believe the front legs were about 3" taller (don't quote me on that, I can't find the sketch I had for this), but what was important was the back was slightly taller than Ghost!
Forgot to protect yourself from the chemicals in the pretreated wood always wear a mask and safety glasses when cutting or sanding FYI
Was wondering if you still remembered how many pieces of 2x4s you used and how many sheets of plywood?
I know the plans for the build are paid for but how big approximately is this one? Wanted to make one that my two huskies can share. Is this big enough with plenty of room or should I make it bigger? Looking for a LxWxH if possible
Looks good, maybe should have measured how tall ur dog was so u knew how tall to build the house, but it looks good.
This was designed around him, I tried to use the rule of thumb for dog crates - enough room for him to get up, move around, and lay down.
With the wood prices now the tile should be building a dog house under 300.00 dollars.
at least :'(
Hi there! Love this house! How did you determine the angles for the 4 vertical side pieces? You mentioned 2 were longer and 2 were shorter. I have a Ryobi Compound Saw as well and beveled my ends but now the roof placement doesn’t match the angles (if that makes sense). Any suggestions?
Just cut all of the angles at the same time at 5 to 10 degrees, then you'll just have to play with the length of your short sides until the line up to the back slope. Use a 2x4 clamped between the front to back to find your proper height and angle of slope!
Great job,
I live in California,
One 2x4 cost 25 Dollar's lol
Hi I love ❤️ your dog house build!! What are your measurements for it it’s the perfect size I want to build although it may take me longer to build🤣 with that being said I would love it if you could give your measurements for your wood cuts?
Bleh!!! I made a Dog house in 15 minutes with 4 pieces of plywood screwed together. Wam bam thank you mam. Finished with a blue tarp for a roof done!!!!!
Definitely one way to do it!
Hi! Awesome video! Was wondering if you could publish the dimensions of your cuts. Thanks!
This has definitely been a big request. I am going to try and put something together hopefully soon!!
What was your height, length and width for the house please?
Great video I love the dog house I have one question. For the frame you used treated wood? And for the floor in treated plywood ?
Thank you so much! The only pressure treated wood used in this project is the frame with contact to the ground. Everything else is NON treated wood (including the plywood floor)
@@thewoodworkinghusky3284 ok thank you sir !
How were you able to figure out which angle to cut the wood that holds up the roof? Is there a calculation or did you eyeball it. Since the back legs are shorter than the front legs.
I created it in Sketchup first - What I did was measured the high part of the angle, and the low end of the angle, connected it with a straight line, and cut it with the circular saw. Rinse and Repeat for the other legs.
Just finished mine with cedar. It's a lil bigger and no windows. Looks like your cuts were giving you issues. Small mistakes can lead to bad lines when done.
Would you be able to tell me what measurements you used for the pieces? Thanks
I don't have a list of all the dimensions for the pieces, but the house itself is approximately 32x40 (I took them from his crate) and about 24" High in the front, slightly lower in the back
Hi! My dog weighs over 100 lbs.. how much can this DIY dog house hold?
What were you doing at the 6 minute mark
What was your height and width of your dog house ?
Parvez Aslam good thanks so much love u 🇵🇰 very good
Thanks for the support!
Nice, however I think you forgot something kind of important ... the drip edge on the roof, without it don't know how long that roof will last.
Yeah... Definitely forgot that. I should have done more research into it, but that's part of why I made this channel: To get feedback and learn. Now I know what to do better next time! Thank you so much for the feedback, I really appreciate it!!
drip ??
My neighbor has her dog outside and I wish I had the tools to build him this
aww that would be so nice! This really could be made with simple hand tools, it might take a little longer but could be just as great!!
Use pallets! Took me 3.5 pallets and 2 large plywood sheets and a bunch of long and short screws ....and a couple 2x4s.... but just need a good strong drill and that's it.... and a hand power saw.... and a hammer lol
Didn’t it turn out to be too heavy to move around?
How short do the legs havs to be for the drop on the roof does it matter?
as long as it is tall enough for the dog to stand under, it doesn't matter!
This dog house is now worth 2,000
Unfortunately
I have a question for the material list is it one of each ?
yes!
Hi I'm wondering if I can use OSB instead of the plywood?
I'm sure you could!!
“Under $100” but now lumber prices are through the roof😅
Tell me about it, this was a hobby for me. Had to put it on hold because I can't really afford to make anything else, just doesn't make sense at the moment.
How big did you make this ?
It is approximately 32" by 40"
What are the exact measurements of each piece after you cut them?
The plans are in the description below
Man you’re fast!.......
I going to build this soon. Is there a way for me to add insulation? Winter here is cold
Winter is definitely here, and Ghost absolutely loves it. I'm sure it would be possible. What I would do to insulate it would be add the outside of the house like I did, add insulation on the inside, and another piece of plywood for the inside wall. I don't know if that would be the right way to do it, but that's what I would have done
@@thewoodworkinghusky3284 wood chips!
What are your door opening dimensions ?
Sorry to get back to you so late! I designed the opening to be about 8" wider than my dog, and about 3" taller!
No way you did this for under $100, everything costing me around $300 at my local hardware store
Gracie is a two year old yellow Lab that is nearly all white. She lives on a corner where the neighbor kids go by every day to and from school. She thinks everyone and their dogs are coming by to say hello, play or maybe give her a treat. Even the garbage man stops and / or backs up to give her a quick pet and a treat.
Not sure if this was made to prove a point about low budget possibilities, if so, then it makes sense. However, I would the first mistake was definitely not putting underlayment beneath those shingles. May be just my preference, but either way it’s a great build. I love the simplicity of this project as a whole. Amazing! And Beautiful Husky 😍
Thats so funny I was thinking the same thing when he started to shingle. Need that synthetic. I may put a mini turbine on mine.
Where can I find plans with dimensions ?
I don't really have exact dimensions anymore, I just based it off the crate (roughly) he uses in the house!
How did you cut it to be slanted
I measured the highest point that I wanted the house to be, and the lowest. I then took a circular saw to cut each leg to the correct angle.
Material list?
Pressure treated 2x4's (Base only - nothing where the dog might chew on)
Regular 2x4's (the 4 posts)
Plywood (the floor and the roof)
Wooden Siding (the 4 sides of the house)
Scrap Poplar (to frame the windows/Doors)
Roof Shingles
Screws
Construction adhesive (for trim pieces and the shingles)
Hope this helps!
Your side walls should covered the base and not sit flat on it. Water will leak back in through the bottom for sure.
Definitely something I should have considered, so far water has not found it's way in at all so far!
Im planning on getting a rottweiler and im scared of him getting out is it possible that he can get out if I dont have a gate or something there
Aww there is a Rottweiler that lives down the road from me!! Yeah he could definitely get out. This wasn't created to hold him in while outside. I made this so he can go in and hangout with us in the summer - he's not the biggest fan of the heat. However, you could install a hinge with a gate and lock on the front so you could make this into a crate!
@@thewoodworkinghusky3284 Thank you!
Bro I recently bought the plans but didn’t receive anything to my email. I have contacted you through the website that is provided. Please get back at me when possible thank you for your time.
I need this for my hens. They are roam free chickens and they need something to sleep in at night. How do you do this if you don't have all the tools like a saw etc. They make it look easy but it;s not. I would just rather pay someone to build this for me......
what's the size of the floor??
Approximately 30x40, I took the measurements from his crate
30 in by 40in?
Nice video.
First step .buy all the nice tools to build the house.(2000) bucks.
Second step,build a dog house under 100 bucks.lol.
What are the dimensions of the dog house?
It is approximately 32" by 40"
@@thewoodworkinghusky3284 Thanks. How much higher was the front from the back, and what angle did you cut at?
@@DBellMusic I made the back about 4" shorter, I didn't measure to a specific angle, I just lined up the pieces to an angle that looked right, marked and cut.
When can we get the rest of the dementions?
What size is it
It was taken off of his crate, about 2' by 3'
✋✋👍👍👌👌✌
thank you so much!
pretty sure the lumber for this alone now costs about $350 at minimum lol
first you need like $1,000 for just the tools before you can spend $100 on the materials
I used the tools I had at my disposal, you can definitely use minimal tools for this (hand saw, hammer, nails) no problem.
Can you send me a product list for this project
I am trying to get something together for this!
Wood's dummy expensive right now.
The music is same sounds over & over, drop it
Video making is not my forte (obviously) Thanks for the feedback, I will definitely be better moving forward!! (hopefully!!!)
Wood ain’t so cheap anymore. This cost $400 now
100 dollars if you have all the tools 900 if you're not have the tools
"the chemicals in the wood are dangerous"
Then cuts wood without a respirator
100 dollar what about tools cost?
Fair point - under $100 in materials. However this could be done with at least a drill, and hand tools. Would definitely take longer to do, but can still be done! Best part about this hobby - more than one way to do something!
@@thewoodworkinghusky3284 great job
This was so easy to follow and me and my man started this build. Its really awesome thanks seeetheart.
100 dollars in India money
100 USD
Oh! You have untreated wood at the same level as your pressure treated. 🤦🏼♀️🤦🏼♀️🤦🏼♀️
This guy is super slow but nice info
Can you make a BRICK DOG HOUSE WITH NO CEMENT FOR 12.3 MILION Subscribers please 🙏 😢 😫 🙂
Can you build me one 😂 I have no tools
I don't have a dog :(
So, why am I commenting about that on this video?
Because you want a dog, and are looking for something to make one you get one!
Two mistakes the house needs 4 legs to be little in air for the house to be dry not get wet in rain and no need of windows because wind will go in house if you add some plastic seetru in windows its ok all outher is perfect
Yeah I definitely should have left a bigger gap between the bottom of the legs and the floor so water doesn't get soaked up and rot the wood - I definitely could have done the windows differently, but I like how they came out aesthetically with them being open!
@@thewoodworkinghusky3284 not saying its bad i like it alot changes can be made easy
@@vasilasenov2479 Definitely! I plan on bringing it in for the winter (not for long though!) I plan on trimming the leg pieces, and moving it under my deck, that way he has a place to "Chill" (pun intended) after playing in the snow!
If placed in the elements, Square 1.5" thick concrete stepping stones place at each corner would work fine
@@kevinsteinmetz2500 I ended up doing something similar, I had extra stone pavers like rocks I used for a different project around the house - I put those underneath to raise the doghouse by about 2"
not hundred dollar anymore lumber gone way up
300.00 doghouse now thanks to Biden
Looks too small for that dog.
Under a 100 my ass shit the wood is 3 times as much now
Dog can’t fit I that dog house
Nice. But i hate how its "under $100" yea if you have all the necessary tools.
I stopped watching once’s I seen that Milwaukee drill
Sorry to hear that. But it's a fine example of you can do things on a budget. That was one of the first things I bought when I purchased my house ($40 for a drill/driver set was worth it for me). I plan on upgrading as I go