Another thought just in. I like to paint parts to make them look better and eliminate corrosion issues. This is extra effort BUT the results are really impressive. Use Rustoleum Gloss Black or any other color you need. Gloss gives an awesome finish. First strip the scale and dirt which you have done. Clean the pieces well and deburr the rough spots. Maybe brake cleaner or acetone to finish that segment. Now apply Rustoleum Red Oxide Primer with a brush then follow on with the Gloss Black paint. Overspray is avoided and the material goes on metal surfaces very even. These products available in gallon cans need to be very well stirred to get the solids off the bottom and suspended in the fluid. Try this and you will do much less spraying of paint. The end results are right of the charts and the finish is silky smooth.
I replumbed the bottom of mine with black iton pipe what a world of difference. Been at it for 3 hrs and one clog only because I mixed my fine coal slag with course.
Hoses just came from a blasting supplier online. The fittings just came from the local hardware store. The nozzle was bought off Amazon. Hope that helps.
It was not a kit. The bottom hardware just came from the local hardware store. The hose came from a industrial basting supply online. The gun was ordered off amazon. One big factor to it is just getting the cfm airflow up.
I also battle to use my Sandblaster, and need the ddetail kit the I van use on my pot. I already also bout a 45 liter pot plus a 200 liter MAC Afric Compressor.
Can you add where you got your hose and fittings in the description?
Love the video… exactly what I needed… can you too me where you bought the hose and blasting tip … thanks
Another thought just in. I like to paint parts to make them look better and eliminate corrosion issues. This is extra effort BUT the results are really impressive. Use Rustoleum Gloss Black or any other color you need. Gloss gives an awesome finish. First strip the scale and dirt which you have done. Clean the pieces well and deburr the rough spots. Maybe brake cleaner or acetone to finish that segment. Now apply Rustoleum Red Oxide Primer with a brush then follow on with the Gloss Black paint. Overspray is avoided and the material goes on metal surfaces very even. These products available in gallon cans need to be very well stirred to get the solids off the bottom and suspended in the fluid. Try this and you will do much less spraying of paint. The end results are right of the charts and the finish is silky smooth.
I’d like to know the exact parts and sizes of each part plz
Either he can't read or he dead😆
Hello! Did you have to tap the bottom 3/8 welded bung to accommodate the 1/2 inch nipple? If so, how did you execute/accomplish a re-drill/re-tap.
Hi where did you get the hose from
Is it posssible to send me a detailed list of all the parts purchased along with links to the source where they were purchased? Thanks
all
Good job as always
Can you list all the upgrades you did for the hopper pot?
Even the ones from the hardware store please?
I replumbed the bottom of mine with black iton pipe what a world of difference. Been at it for 3 hrs and one clog only because I mixed my fine coal slag with course.
It makes it a good usable sand blaster
What did you do with the dryer?
what is the brand of the hose setup you put on it? how long is the new hose, the hose with the blue writing on it. what psi is the hose. thank you.
Awesome do you have a link to where you got hose and fittings ?
Hoses just came from a blasting supplier online. The fittings just came from the local hardware store. The nozzle was bought off Amazon. Hope that helps.
Hi. Love you video, can you put a link down like where did you get all the upgrades materials from. Thank you
bluedogblasting.com/shop/hoses/2-ply-blast-hose/12-id-x-1-18-od-2-ply-blast-hose/
www.amazon.com/your-orders/pop?ref=ppx_yo2ov_mob_b_pop__fp_3_pp&orderId=111-0233288-1765008&lineItemId=njnlnrppoltnwny&shipmentId=Dq2k6q1bc&packageId=1&asin=B07RXN4FVC
The fittings all came from the hardware store.
Since you have upgraded how do you like it the Sam still get stuck now and then? Cuz I want a copycat what you've done.
It works well With larger air supply an larger lines.
cool
Ameriblaster makes a kit for these pots. I have one on mine. Works a world better!
Where did you get your up grade kit
Most of the parts came from Lowes. The rest came from Amazon.
How much in upgrades I'm looking to but the Blaster and do the exact upgrades you did.
It's been a while back but I think it cost around 75 dollars total.
@@matthewsmotorsportsgarage7407
Hello! What did you do to get the bottom bung from 3/8 to 1/2 “? What did you do with the provided dryer?
Also need exactly the same information as yours. I'm battling to much with my 45 liter pot and 200 liter MAC A FROC Compressor. 😢😢
Where you order the kit
It was not a kit. The bottom hardware just came from the local hardware store. The hose came from a industrial basting supply online. The gun was ordered off amazon. One big factor to it is just getting the cfm airflow up.
I also battle to use my Sandblaster, and need the ddetail kit the I van use on my pot. I already also bout a 45 liter pot plus a 200 liter MAC Afric Compressor.
Hold the camera still
And back off on the zoom
Low quality amateur video.
Why don't you put out a better one
Where did you get the hose from
Check couple of comments before yours. I listed links to the parts that i used. Another person asked the same question.
Where did you purchase the upgrade materials
On Amazon an local ace hardware store. The hose I just did a search for media blast supply on the internet.