Very good video,then I wish you answer me some few questions on this.firstly, can the welding machine replace a real welding machine? secondly, which type of transformer is that? thirdly, which one is the light and neutral of the two primary coil? Is it starting point or ending point? Lastly, which one is the electrode Holder wire of the secondary coil? Is it the starting point or the ending point? thanks and God continue to increase you in wisdom.
Okay thanks, the coiled wire, was it cooper or aluminum? And the type of transformer you used in this video?is it from UPS or inverts or stabilizer?or can any transformer be used?
You have to come out of your winding at different places to be able to adjust the amperage..And it helps to know how to weld..If the surface had been prepared..you may could kept the arc going..
By increasing turns ratio, can decrease secondary open terminal voltage to 40 volt and hence, can get better current and voltage ration to melt the welding rod. Size of welding rod seems to me, 2.5 mm and it needs 75 A and 22 volt minimum to do welding. For 220 volt input, primary turn should be 264 minimum.
Namaste sir ji Mein Malegaon Nashik Maharashtra State se hu Sir Tar number Aur Bobbin size Core Size Aur Turn kitne hai sir Mein Automatic stabilizer Bana ta hu Aur cell karta hai sir ji
i think that is good job, because in DC welding machine out put volt is 62-78, so if i calculate his turn ratio he will get 68.33 volt, if i calculate transformer loss then he will get minimum 58 volt with is better for welding. But that is not heavy duty, but not bad.
Bahut aacha bhaiya aise hi pulse transformer ka video bana dijiye
Very good video,then I wish you answer me some few questions on this.firstly, can the welding machine replace a real welding machine? secondly, which type of transformer is that? thirdly, which one is the light and neutral of the two primary coil? Is it starting point or ending point? Lastly, which one is the electrode Holder wire of the secondary coil? Is it the starting point or the ending point? thanks and God continue to increase you in wisdom.
Yes and yes
Okay thanks, the coiled wire, was it cooper or aluminum? And the type of transformer you used in this video?is it from UPS or inverts or stabilizer?or can any transformer be used?
Please,is the coiled wire copper or aluminum?
Good trick
You have to come out of your winding at different places to be able to adjust the amperage..And it helps to know how to weld..If the surface had been prepared..you may could kept the arc going..
Very good
Thanks
how can you tell that it is 300 amps...sorry if thats a dumb question
hi. broo. please tell me. core size
Very good video
Thanks
ना bobin की साइज़ के ना core साइज़ ऐसा नहीं चलेगा नो लाइक
Good
Thanks
By increasing turns ratio, can decrease secondary open terminal voltage to 40 volt and hence, can get better current and voltage ration to melt the welding rod. Size of welding rod seems to me, 2.5 mm and it needs 75 A and 22 volt minimum to do welding. For 220 volt input, primary turn should be 264 minimum.
मूझे घर परही वेलडींग मशीन बना नी है केसे बनाऊ ?
How many voltage
Nice videos.
Many many thanks
300 Ampere ?
Saya tidak yakin. Coba di tes dengan Amp-meter.
Nice
What is the core size.primary winding swg turns.and secndre
Agr by mistake earth wale wire ko touch ho gya current Lage ga?
300a no the transformer size cant deliver that amount of power
It can, it's not the matter of amps, but the matter of power V x I
What a primary wading used
Bhaie etni dair laga di ap nay patri laganay main
बेलडींग transfer waindig vidio
Kitna no ka rod use kar sakta hain or kitna time tak use kar sakta hain
Sir 48 volt battery charger ka welding set ban sakta hai?
what size of wire and how many turns?
Wire size secondare wire no 16 turn 180
Primary wire no 9 turn 48
Bhai kya ye welding macine carent marti hai
How menny ampers transformer?
how much turn didn't show
Namaste sir ji
Mein Malegaon Nashik Maharashtra State se hu
Sir Tar number Aur Bobbin size Core
Size Aur Turn kitne hai sir
Mein Automatic stabilizer Bana ta hu Aur cell karta hai sir ji
Ok brater
kitna number ka Bobin ?
Sir can it shock the hand?????
no
@@MULTIELECTRON Sir, why did you not touch the iron without plier.
@@drawingexpression because yes it can shock you. It can actually very easily kill you. Don't attempt this if you're questioning if it can shock you.
Hum na samajh paye.
Super
Thanks
guru iss line me kab se ho suru
hlw sir
core size ?
Check description
Very good 👍
Thank you 👍
Como puedo viajar le anperage a unsoldador de dos veinte boltio
You guys have to start from the scratch so that wee will understand what you're doing
Watch part 1
How mach turn is swr
How to perchace core
out put me konsa curunt ayega
Iska data kitne gage kitne turn
harif nw
सर जी लूप कहां गई पहली क्वायल की
Show from starting point
Price? Kia aap bhej sakty hyn?
i think that is good job, because in DC welding machine out put volt is 62-78, so if i calculate his turn ratio he will get 68.33 volt, if i calculate transformer loss then he will get minimum 58 volt with is better for welding. But that is not heavy duty, but not bad.
turns and swg and core size, please
Bhai ye supply kitni power ki hai
3000 watts 220 volt
बायडींग कैशे कीया है
Bobin size.
درست کردن ترانس ۱۲ ولت
What's the output of this transformer pls
55 volt
Ok
Sir iska data bataye na please
Wire kitna swg. Turn ? so very bad
Calculate
All information ??
Is there a link for the materials used and a materials for DIY transformer?
How many turns each... Primary & secondary??
What is the core size?
Primary winding SWG turns?
Secondary winding SWG turns?
Wire size secondare wire no 16 turn 180
Primary wire no 9 turn 48
Nober coil
Ustad ye 220 volt pe chal raha hey
yes 220 volt
Tar number kya hai aur tarny kehtni hain
amper10
Dc 55 voltage sir ji
thank you
shok
Rapaz que caras mal educado! Não fala o fio que tá usando as voltas, vídeo malfeito, vou sair da escriçåo
Data kya hei no laik Nahi milega
Input 220v AC he aur output 300A he par output kitne volt AC he? Sirf music sunai de raha he voice bhi to dalo.
चूतिया बना रहा है केवल.... ज्यादा से ज्यादा 2 या 4 वोल्ट ही होगा
Your winding wire size , transformer size not allow 300A. Please 😅
কোর কোথায় পাবো
How many volts