Awesome. I posted some pictures on the TRX4 site just two or three months after the D110 was released of my putting a 775-Titan motor in my yellow "Killer Wasp TRX4" because someone said it could've be done. But I didn't drill new holes. All you need to do it drill-out the holes in the motor mount. I also put a 775-Titan motor in my comp-SCX10 many years ago...as much as I love the torque of that bigblock my run times went from 3 hours to less than an hour , so I pulled it. The 775-Titan is a fun motor but it does need voltage....it's essentially a 18+ volt drill motor. I have the Dewalt/Black and Decker part number. Double check but I'm pretty sure it's a 5-armature motor too. If you don't mind the drop in battery milage....it's a pretty awesome crawler motor.
Tom Lucas I think I remember yours. How did you put it in without new mounting holes? It has a 29mm pattern and the mount is a 25mm pattern. Sean is just going to mud and tear it up so no need for long runtime.
@@ExocagedRC I don't remember widening the holes. All that was needed was drilling out the motor mount holes from 3mil to 4 mil. I'll double check later. Oh...a little trimming of the servo-mount/cross brace help. The 775-Titan didn’t stay in there because the 1800kv Revolver I was running makes the same if not more torque with way more run time(earlier this year I put in a 2100kv Puller Pro 4274S...it's amazing , roughly the same size as the 775). I'm so glad you put that bigblock in there. It's just really cool to see others do these things. Most hobbiest seem like they are scared to try something different and maybe cut some plastic here and there. Boy!...that mud truck just jumps off the line. Nothing like cubic inches. Hahaha
I have a couple of spare 7xx motors I'd considered for the TRX4, but held off because of the timing advance/rotation problem. The portal axles switch the rotation of the whole transmission so that they went with a "Reverse rotation" 550. This is just a CW motor, with timing advance in the opposite direction. The 775 is conventional, CCW rotation, so if it has any advance (it does) then it will be running horribly inefficiently in reverse. It's particularly annoying, because Traxxas could have avoided this by flipping the diffs around, so the ring gears were on the other side, then all the conventional RC brushed motors would work just fine.
Looking forward to!!! 🖒💯.. Servo winch turned out KILLER!!! In my EnDuro, Used the traxxas XL5 ESC for which control out my sport!. Thanks for your info Saved my 85$ to 199.. for a winch!! I pay ten$ .. for a winch spool and cable.. 👌👌.. channel. NC❤ back yard RC.AND MORE.
@@ExocagedRC I like Spiderwire 100 pound fishing line. I can't believe the industry sucks us in to paying $10 for 10 feet of fake winch line. I also use heaving duty treble hooks for my servo winches. Buy a box at a time. I de-sharpen and cut off what I don't need.
Hey Juan(if you don't mind me answering that Joe). The 775-Titan has a great start-up for crawling. It's a 5-armature motor(like a giant Holmes Hobbies Crawlmaster) Only downside is the run time is significantly reduced.
Wow very nice Guys was fun all the way I just have a small question sr were did you get all those jack towers brother they look really cool back there whit all your rigs man. I will appreciate it if can pass a link or something so I look for some of those jack towers bro. Thanks dude👍🏼👍🏼💯
Hi, how did you wire up the motor leads? Did you use all 4 wires? I was trying to run it in the cen f250 but kept over heating just minutes. I bought the whole setup you installed in sauns bronco. Any advise.
😮, It's a fun little motor, I've burnt quite a few doing silly things, that was pretty funny though 😂👌 Although in a truck that light compared to what it normally runs in, gotta say, that was pretty cool.
One question. How do you power both halves of that 775 off of an ESC not made to run dual motors? I had the same motor in my summit (before I went brushless) and it needed the evx (or any dual motor ESC) ESC to get power to both sides of the motor. It will run off just the one side, but your losing out on power and speed I would guess.
@@ExocagedRC then why does it have 2 power and 2 ground connections and run off a dual output ESC? Seems to me like you would be only getting half the power (voltage) the motor wanted. I tried to run my 775 Titan off a single ESC and it was not nearly the same power. Like I said, just curious. I run brushless in my summit now and my Emaxx has the evx-2 ESC in it powering 2 21t trx-4 motors (it's my snowplow lol)
josh patzer if you look at the wires on the motor they go to the same tab. In the esc the positive and negative most likely are also on the same tab. In the summit, they use the dual wires to try to reduce wire heat from amps. They aren’t needed. If you look in the motor end you’ll see two brushes. So only one wire per brush is needed. His is running on 3S in this video and I’ll be installing a Hobbywing 880 esc so he can run 4S for more power.
Have a question. I'm trying to put this motor. Am I 4x4 slash? What is the size? Drill bit that you use. To make that happen And what? 3mm size screw did you use? If you can help with that gladly appreciate it.
Hey I'm sorry, but I don't think you are going to reach 30,000 subscribers by this November. Something I have learned is just to take little baby steps at a time. So hopefully if not now but later your channel can get 30,000 subs. Good luck
Exocaged RC Id be furious if someone did that to my crawlers lol. I’ve had a summit but currently run a tactical and g500. I think the summit is way more fun to take out, that thing was a beast I actually miss it despite the size difference. I think all it needed was the more durable 2075x servos for like 20 bucks on eBay lol
@@sunglassesron9464 we have sand, mud and hills, a straight crawler never works out for us. if a 55t on 2s works for you then cool, here it won't work at all as soon as you get off the dry clean rocks. Besides this is a fun mud truck at this point.
@@ExocagedRC lol, we have those incredibly rare geological features too *rollseye* Now you're being very presumptuous about what "I" run in my rig! And up until a couple of weeks ago I was running a Castle sensored brushless system. Very smooth... however (for me) it lacked the amount of torque I wanted. So I've gone back to brushed, only I've gone for a dual motor combo...
@@ExocagedRC I'm sure he will be looking forward to that cleaning day teardown!! My rig is almost refreshed, bearings, gears, rod ends etc. I gave it a beating for about a week straight to do some priceless clips and destroyed the phone with all my footage in it. Full send for a weeks worth of bench time! Keep it coming man you're THE BEST!
@@ExocagedRC haha well I can't say I always abuse my rig but I drive ALOT and see alot of water. I have a day one trx4 and just opened the trans for the first time last month, not very bad at all! Axles are a different story lol, those guys been through a bearing or 20. Other trx4 doesn't see much water and it looks great every time I open it!
Shawn is the man. He sold me my first RC crawler.
Crazy! I was just trying to find a video of a 775 titan motor in a trx4 2 days ago and found nothing. Please make another :)
Yeah it’s going to get an esc upgrade and 4S. Should wake it up a bit.
Awesome.
I posted some pictures on the TRX4 site just two or three months after the D110 was released of my putting a 775-Titan motor in my yellow "Killer Wasp TRX4" because someone said it could've be done. But I didn't drill new holes. All you need to do it drill-out the holes in the motor mount.
I also put a 775-Titan motor in my comp-SCX10 many years ago...as much as I love the torque of that bigblock my run times went from 3 hours to less than an hour , so I pulled it.
The 775-Titan is a fun motor but it does need voltage....it's essentially a 18+ volt drill motor. I have the Dewalt/Black and Decker part number.
Double check but I'm pretty sure it's a 5-armature motor too.
If you don't mind the drop in battery milage....it's a pretty awesome crawler motor.
Tom Lucas I think I remember yours. How did you put it in without new mounting holes? It has a 29mm pattern and the mount is a 25mm pattern. Sean is just going to mud and tear it up so no need for long runtime.
@@ExocagedRC I don't remember widening the holes. All that was needed was drilling out the motor mount holes from 3mil to 4 mil.
I'll double check later.
Oh...a little trimming of the servo-mount/cross brace help.
The 775-Titan didn’t stay in there because the 1800kv Revolver I was running makes the same if not more torque with way more run time(earlier this year I put in a 2100kv Puller Pro 4274S...it's amazing , roughly the same size as the 775).
I'm so glad you put that bigblock in there. It's just really cool to see others do these things. Most hobbiest seem like they are scared to try something different and maybe cut some plastic here and there.
Boy!...that mud truck just jumps off the line. Nothing like cubic inches. Hahaha
I have a couple of spare 7xx motors I'd considered for the TRX4, but held off because of the timing advance/rotation problem. The portal axles switch the rotation of the whole transmission so that they went with a "Reverse rotation" 550. This is just a CW motor, with timing advance in the opposite direction. The 775 is conventional, CCW rotation, so if it has any advance (it does) then it will be running horribly inefficiently in reverse. It's particularly annoying, because Traxxas could have avoided this by flipping the diffs around, so the ring gears were on the other side, then all the conventional RC brushed motors would work just fine.
Love the truck, so painful to watch it in the water
Gotta Like how he just Rampages the Deep water LMBO 💯😀👍👍
Man Shawn went 0 to 100 real quick. Jeesh lol
Looking forward to!!! 🖒💯.. Servo winch turned out KILLER!!! In my EnDuro, Used the traxxas XL5 ESC for which control out my sport!. Thanks for your info Saved my 85$ to 199.. for a winch!! I pay ten$ .. for a winch spool and cable.. 👌👌..
channel. NC❤ back yard RC.AND MORE.
ABW 77 23 awesome I’m glad you were able to save some money.
@@ExocagedRC I like Spiderwire 100 pound fishing line. I can't believe the industry sucks us in to paying $10 for 10 feet of fake winch line. I also use heaving duty treble hooks for my servo winches. Buy a box at a time. I de-sharpen and cut off what I don't need.
Back in the water/mud again I see! lol
Baxrok2 LoL I was hoping he would mess around a bit for more video, not him!!
I use the hobby Wing 1060 with 3s all the time
775 in trx4 sounds sweet but...how long play until battery die? half time compared with 550?
Amazing mod, but, try crawling with this motor in a video, I want to see how crawl this 775.
Juan Marichal I’m getting it back for a different esc so I’ll try it on the rocks. I can tell you it’s too tall and will fall over pretty easily.
@@ExocagedRC I understand this, but wait for a new video.
Hey Juan(if you don't mind me answering that Joe). The 775-Titan has a great start-up for crawling. It's a 5-armature motor(like a giant Holmes Hobbies Crawlmaster) Only downside is the run time is significantly reduced.
@@tomlucasrccrawlers9108 thank you very much for the information.
Nice job modding that motor to fit! Sounded & looked like you did it perfectly! Holy 💩 That thing boogies now! 👍👊👌
Wow very nice Guys was fun all the way I just have a small question sr were did you get all those jack towers brother they look really cool back there whit all your rigs man. I will appreciate it if can pass a link or something so I look for some of those jack towers bro. Thanks dude👍🏼👍🏼💯
rc familia I printed them from a file on thingiverse
RC Addict spotted :D
Kamikaze Shawn
Hi, how did you wire up the motor leads? Did you use all 4 wires? I was trying to run it in the cen f250 but kept over heating just minutes. I bought the whole setup you installed in sauns bronco. Any advise.
😮, It's a fun little motor, I've burnt quite a few doing silly things, that was pretty funny though 😂👌 Although in a truck that light compared to what it normally runs in, gotta say, that was pretty cool.
drog343 should be getting it back for an 880 esc. He wants to run 4S on it
One question. How do you power both halves of that 775 off of an ESC not made to run dual motors? I had the same motor in my summit (before I went brushless) and it needed the evx (or any dual motor ESC) ESC to get power to both sides of the motor. It will run off just the one side, but your losing out on power and speed I would guess.
josh patzer dual halves? It’s a simple brushed motor with 2 input tabs. No need for the additional plugs on the motor.
@@ExocagedRC then why does it have 2 power and 2 ground connections and run off a dual output ESC? Seems to me like you would be only getting half the power (voltage) the motor wanted. I tried to run my 775 Titan off a single ESC and it was not nearly the same power. Like I said, just curious. I run brushless in my summit now and my Emaxx has the evx-2 ESC in it powering 2 21t trx-4 motors (it's my snowplow lol)
josh patzer if you look at the wires on the motor they go to the same tab. In the esc the positive and negative most likely are also on the same tab. In the summit, they use the dual wires to try to reduce wire heat from amps. They aren’t needed. If you look in the motor end you’ll see two brushes. So only one wire per brush is needed. His is running on 3S in this video and I’ll be installing a Hobbywing 880 esc so he can run 4S for more power.
Where would I find some of those jack stands that the trucks on the shelves are sitting on?
I printed those from a file on thingiverse but you can find much better ones on eBay
Have a question. I'm trying to put this motor. Am I 4x4 slash? What is the size? Drill bit that you use. To make that happen And what? 3mm size screw did you use? If you can help with that gladly appreciate it.
Hey I'm sorry, but I don't think you are going to reach 30,000 subscribers by this November. Something I have learned is just to take little baby steps at a time. So hopefully if not now but later your channel can get 30,000 subs. Good luck
tidus pernicano yeah it’s not going to happen. I’ll still do a giveaway of something.
At least there is still a chance we have like a month and a half or so. I'm hoping for the best.
tidus pernicano I’ll set up another Q&A for next week.
Hi there, can you fit 2.2 wheels on that lifted bronco? Great vids
UNRooted RC those are 2.2’s
Exocaged RC thanks mate, never had a TRX 4, thinking of getting one 👍🏻
UNRooted RC the trx4 is possibly the toughest truck on the market. No kidding
@@ExocagedRC from you that's high praise, I'll get one then 👊
Do you think it would be possible to fit the 775 motor into a Redcat Gen8 without too much of a problem?
Haven’t considered it but I doubt it will fit due to length.
Tell that guy to get a boat next time sheesh
LoL he has about 5 of them.
Exocaged RC Id be furious if someone did that to my crawlers lol. I’ve had a summit but currently run a tactical and g500. I think the summit is way more fun to take out, that thing was a beast I actually miss it despite the size difference. I think all it needed was the more durable 2075x servos for like 20 bucks on eBay lol
I was curious to see how the 775 motor articulated crawling mounted in the trx4. Would like to watch it go over a rock course.
Mike Morelli it’s horrible in this truck. Way too tall and top heavy. There are way better bolt in options for the trx.
Mike Morelli yeah well it is his truck so....
😎👍
Can i get a update on this.. please
Still running. Best for general play due to gearing.
What's the best way to water proof tires?
Wow that guy said full send then it died lol
Cool test wtf
It's a crawler ffs, why would you gear it for speed?
because its fun? and its a hobby? and mud trucks aren't slow.
@@ExocagedRC Yes fun is subjective. However, crawlers... well the clue is in the name really.
@@sunglassesron9464 we have sand, mud and hills, a straight crawler never works out for us. if a 55t on 2s works for you then cool, here it won't work at all as soon as you get off the dry clean rocks. Besides this is a fun mud truck at this point.
@@ExocagedRC lol, we have those incredibly rare geological features too *rollseye* Now you're being very presumptuous about what "I" run in my rig! And up until a couple of weeks ago I was running a Castle sensored brushless system. Very smooth... however (for me) it lacked the amount of torque I wanted. So I've gone back to brushed, only I've gone for a dual motor combo...
Dude, invest in a microphone... your audio is terrible
Hope that's not yours 😂😂😂 oh lord the sand.
TopChef R/C Midwest Crawlers lol nope not mine
@@ExocagedRC I'm sure he will be looking forward to that cleaning day teardown!! My rig is almost refreshed, bearings, gears, rod ends etc. I gave it a beating for about a week straight to do some priceless clips and destroyed the phone with all my footage in it. Full send for a weeks worth of bench time! Keep it coming man you're THE BEST!
TopChef R/C Midwest Crawlers yeah man I doubt he has even opened it up to check it. He isn’t the best on maintenance.
@@ExocagedRC haha well I can't say I always abuse my rig but I drive ALOT and see alot of water. I have a day one trx4 and just opened the trans for the first time last month, not very bad at all! Axles are a different story lol, those guys been through a bearing or 20. Other trx4 doesn't see much water and it looks great every time I open it!
That was a waste of my time 😅