Mate these videos are absolute 🔥 I love the detail that goes into it. Not just a quick explanation then cut straight to the finished product. Awesome work mate. And can we give a thanks to young Connor good infront of the camera and has some skills behind a welder as well
This is coming along great, speaking of great landcruisers keep an eye out for bluey dyalls LC build. Word on the trails is its gona be the next big thing 👌
Hey mate, check this video for one I have done before. The fuel tank in this video didn’t use the tab and slot method but had returns for all the baffles. th-cam.com/video/fxS4CqXHzrM/w-d-xo.htmlsi=0F4uzDQTU9cOe-co
@@DesignedandBuilt 😂. You are awesome craftsmen, no matter what you are using. I love watching your builds. I build fuel tankers in NZ, but bloody miss building custom rigs.
May I also say in my humble opinion this is the best 40 Series build channel on the internet.
Just discovered your channel and I have to say its the most underrated channel, you should be having 1M subscribers....
will hoping to pop in to lcs this week to talk MWB 46/80 build, your videos are great to watch Richard, well done.
Might cya down there! Cheers Lawrence.
Fab Rats
Mate these videos are absolute 🔥 I love the detail that goes into it. Not just a quick explanation then cut straight to the finished product. Awesome work mate. And can we give a thanks to young Connor good infront of the camera and has some skills behind a welder as well
Thanks Adam, glad you enjoyed it! Yep, he does a ripper job in front of the camera and on the fab work!
Love what you guys are doing with these old 40 series landcruisers
Cheers Mike!
Connor is like a 70yr old master craftsman in a 20yr old body.
That's incredible, I love it. I especially like how the editing makes it look so smooth and quick :D
If only it was real time, we’d be here for weeks 🤣
OH. this is so pleasing to watch
Another amazing video. Such highly skilled tradesmen. Wonderful to watch.
Thank you very much! Glad you enjoyed it!
Got all the gear, makes life a lot easier. Keep it up
What a top episode!! Cheers for taking is along.
Thank you! Glad you enjoyed it 🙂
Awesome work. Been following since you built your Barra 45/80. This is great stuff !
That plasma table deserves an Oscar 🤙
🤣 the real MVP, doesn’t forget its lines or require retakes!
*saya suka video seperti ini, sedikit bicara banyak menampilkan bekerja 👌*
Good stuff, great episode. Enjoyed the content, and looking forward to more
Thanks mate!
just subscribed, Outstanding Work, looking great, cant wait to see more Thanks Godbless
You mates do outstanding work!
Kind words 😊 thank you!
This is coming along great, speaking of great landcruisers keep an eye out for bluey dyalls LC build. Word on the trails is its gona be the next big thing 👌
Its a credit to your skills
Mint! Well done
Fantastic I will be following.
Great build 👌one thing for cab mounts you’re better off using nylon nuts because with the rubber flexing the spring washer and nut can become loose 🍻
Cheers Greg, good call and will do it on final assembly for sure!
Stiffy material 👌
You guys should get a hold of a large press so you can do rounded panels for stuff like the floor replacement.
Mate we would love to! When we can afford it 😁
New fan here from the Philippines
how much welding wire should be used to make the chassis starting from 0
totaly awsome
Whats with the blue colored steel? I've never seen that before!
Just primed steel in Australia!
"Sheetmetal only" bending 5mm plate.... that's how i roll 😊
How do you get those big tyres on the road legally. I’ve been wanting to do a build like that but don’t know how to legally get bugger tyres.
5:18 did you passivate it after?
Was pretty keen on seeing how you guys built the fuel tank, maybe next time 😢
Hey mate, check this video for one I have done before. The fuel tank in this video didn’t use the tab and slot method but had returns for all the baffles.
th-cam.com/video/fxS4CqXHzrM/w-d-xo.htmlsi=0F4uzDQTU9cOe-co
@@DesignedandBuilt Thanks, Appreciate the work you guys are doing it’s inspiring!
Здравствуйте! Подскажите полный размер колёс?
Just subed up its a credit to your skills best from California
Thank you!
where did yous get the new doors and bonnet from?
Muscle car parts!
Can anyone fill me in is this cab no.2 or the original one that Richo put in
This is cab number 2!
May I ask, what happened to cab no.1? Just genuinely interested
Sorry mate, still the same cab as we showed in the past episodes. I thought you were referring to different builds for a second!
Where are the hood struts from
Lcs4x4.com.au!
I wouldn't say a precion ground combination square is a Carpentry tool. I would say a Fitter and Turner Engineer tool 😊
Bloody wood butchers mate 🤣
@DesignedandBuilt Hey hey, chippy here 😂
ابداع فوق الخيال لدي سيارة نفس المديل اريد تعديلها لكن الوضع لا يسمح
Using impact driver with 1/4 inch or 3/8 driver bit is way better than them electric ratchets.
For sure! It was just one of those days where you lose all your impact drivers 😅
@@DesignedandBuilt 😂. You are awesome craftsmen, no matter what you are using. I love watching your builds. I build fuel tankers in NZ, but bloody miss building custom rigs.
yep
First I thought you were building a TANK, but it turned aut to be just a Toioda.
Top mannnj
There is only ONE..
“i” in “ALUMINUM “
😂
Great job on the build guys!
Safety 3rd at 15:40 lol 🥴
OOTG
can you build me one of these
Every man has a price!
Be able to make the _meeting tomorrow and we will get back with the
Sorry but I don't like the fuel tank at the rear. Its not good for weight distribution, everything else is mint.
Thanks Alan. Where would you suggest putting it?
Ask me for help 😂😂😂😂🎉🎉🎉🎉🎉🎉🎉🎉
Too professional so boring…
Can’t please everyone! 😂
What did you do ,chop the roof ??
Kind of looks like you chopped it,I hope not !!!!!