cr250 crank seal replacement

[@jeffbuck9654]

Just did my 2001,and your right it's Tight but doable.

[@CroProNoob]

Shouldn't the crank seal be installed with the litle spring being on outside?

[@JoeTheBlacksmith13]

Yeah, I believe the spring should face whatever side the oil is on.

[@kf-dk5pb]

Hi can I ask why you needed to remove the clutch housing as well , cheers

[@legenderekfixes]

The seal is behind the clutch basket

[@kirbylee57]

Your pants were already ripped, slick.

[@itsthecodygoodnight]

So after doing the seal did it fix the oil in the pipe problem? Mines doing it really bad and I just bought the bike

[@legenderekfixes]

@@itsthecodygoodnight yep!

[@matthewoloughlin9063]

See if i took the top end off would the governor gear come out?

[@andrewerskine3259]

Is the bolt on the primary gear lefty loosey?

[@legenderekfixes]

Yessir

[@andrewpereira1117]

Hey man when I do a leak down test thru the opening where the reeds attach I have air come out of my crank case breather tube

[@legenderekfixes]

You should be applying your air pressure through the crankcase breather. Block off the exhaust, have your gauge adapter on in intake side, and piston at TDC

[@andrewpereira1117]

@legenderekfixes it was coming out the seal against the case of the breather tube not the actual hose but what sits against the case the flat part