@@VisionAutoworks maybe I should clarify. What wire did you use for the switch back for the angel eyes. The side marker I have is plug n play. But my angel eyes have red (+) black(ground) and yellow (goes to turn signal) I just don't know which wire is the turn signal (all 3 are black) either way props on the car. It looks like sex. And thanks for the reply regaurdless if you know which wire I'm talking about
@@reggieridgell769Am not sure on this, we wire all of the angel eyes internally to the headlight so we can easily see which wire it is. Use a multimeter and start probing the connector pins if you cannot locate a schematic/pinout. Inside the headlight, it is a white wire IIRC.
Nice thanks for showing keep up the good work
hey im in the middle of doing something like this. what wire did you tap for the switchback amber lights?? i cant figure out which one to use.
Amber is wired to the factory connector since that is the blinker. White we wire it to the angel eye circuit on the headlight harness.
@@VisionAutoworks maybe I should clarify. What wire did you use for the switch back for the angel eyes. The side marker I have is plug n play. But my angel eyes have red (+) black(ground) and yellow (goes to turn signal) I just don't know which wire is the turn signal (all 3 are black) either way props on the car. It looks like sex. And thanks for the reply regaurdless if you know which wire I'm talking about
@@reggieridgell769Am not sure on this, we wire all of the angel eyes internally to the headlight so we can easily see which wire it is. Use a multimeter and start probing the connector pins if you cannot locate a schematic/pinout. Inside the headlight, it is a white wire IIRC.
@@reggieridgell769 get a volt meter. Turn on your blinkers
Check which wire gets power on and off.. so it should jump to 10v, down and back up
So how do i do this
Product links are in description.