HID(XENON) TO LED BULB CONVERSION ON BMW F25

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 88

  • @FELIPE8226M
    @FELIPE8226M ปีที่แล้ว +7

    The HID looks better and brighter, you need to retrofit a led projector to get better rest

    • @cernobylis
      @cernobylis 5 หลายเดือนก่อน +3

      ALL hid's have a projector:/

    • @zyxelina
      @zyxelina หลายเดือนก่อน

      @@cernobylis That's wrong. Plenty of cars come with reflector-HID from factory.

  • @GoingShirtless
    @GoingShirtless 2 ปีที่แล้ว +31

    Ok - I can't really see why one would replace the HID with LED as the HID has a far superior light than a dinky LED. And if one wished a cooler whiter HID those are available.

    • @maxl7827
      @maxl7827 2 ปีที่แล้ว +9

      Xenon is outdated technology

    • @GoingShirtless
      @GoingShirtless 2 ปีที่แล้ว +3

      @@maxl7827 it does not matter how outdated you believe it to be. Retrofit of anything is not an option if the it goes against rules/laws, and is on top of that not a viable option as the reflector is not built to take advantage of the new light source.

    • @maxl7827
      @maxl7827 2 ปีที่แล้ว +8

      @@GoingShirtless This is a xenon projector, not reflector, theres your first mistake..

    • @GoingShirtless
      @GoingShirtless 2 ปีที่แล้ว +6

      So... I guess we need to talk about physics. A light source regardless of its design will need a reflector. And the reflector here is built for an omnidirectional light source - which a LED array for the most part is not.

    • @aarushgupta6557
      @aarushgupta6557 2 ปีที่แล้ว +4

      @@GoingShirtless Ma brada destroyed Max L in just a second😂😂

  • @ashwinarroju
    @ashwinarroju ปีที่แล้ว +1

    Hi, is there any way to upgrade X3 F25 (2017) halogen lights to xenon or LED? any suggestions would be really appreciated. Thanks

  • @and_rew9768
    @and_rew9768 27 วันที่ผ่านมา

    A fantastic upgrade 👏💪👋

  • @AnthonyPetitt
    @AnthonyPetitt ปีที่แล้ว +1

    Will the LED bulbs work if you have a bad ballast?my HID bulb won't work because the ballast is blown

    • @pacaa
      @pacaa ปีที่แล้ว

      It wont work...

  • @gajilico628
    @gajilico628 ปีที่แล้ว +1

    Thank you for the good video, it was helpful

  • @nikalaus
    @nikalaus ปีที่แล้ว +1

    Does it need Bi-LED? as I know the same bulb is used for Low and High beam?

    • @zk.dailybuild
      @zk.dailybuild  ปีที่แล้ว +4

      No D1S is the bulb type.
      For high and low the mechanism inside the headlight assembly moves to make it high and low, instead of using separate bulbs.

    • @nikalaus
      @nikalaus ปีที่แล้ว +2

      @@zk.dailybuild wow, didnt know about this, thank you so much, so basically all LED will work, otherwise I was looking for the Bi-LED and was weird not to find one :)

  • @sergiopedro1980
    @sergiopedro1980 2 ปีที่แล้ว +2

    Nice explanation. Just one question that makes me very curious. Is it possible to put LED bulbs with more watts in a 35w standard ballasts without any kind of problems?

    • @zk.dailybuild
      @zk.dailybuild  ปีที่แล้ว +3

      I guess it just gets the 12v power from the ballast. After I uploaded this video, I replaced these led bulbs with aukee 50w led. They are even more brighter and I have no issues with them. Running them for the past 8 months.

    • @luckiic5714
      @luckiic5714 ปีที่แล้ว

      You can skip the ballast and wire it directly

  • @sever19851203
    @sever19851203 ปีที่แล้ว +1

    Ты с Али покупал

  • @carlossoto8868
    @carlossoto8868 ปีที่แล้ว

    Where is the link to purchase these lights

  • @fbr4801
    @fbr4801 2 ปีที่แล้ว +2

    Does the led bulb work without the HID ballast ?

    • @zk.dailybuild
      @zk.dailybuild  2 ปีที่แล้ว +1

      No these works with ballast.

  • @saltypoet8562
    @saltypoet8562 2 ปีที่แล้ว +3

    Keep it up bro!

  • @Gooch095
    @Gooch095 2 ปีที่แล้ว +1

    В итоге эксплуатации какой свет лучше?

    • @zk.dailybuild
      @zk.dailybuild  ปีที่แล้ว

      I replaced these Led with Aukee 50w led . They are much better. Running them for past 8 months.

  • @stantoy9607
    @stantoy9607 2 ปีที่แล้ว +1

    Link to your purchase. Or manufacturer info

  • @mediumrarepotato7385
    @mediumrarepotato7385 9 หลายเดือนก่อน

    HIDs will shine further down the road that’s the reason for the smaller hotspot

  • @petarbozhkov624
    @petarbozhkov624 2 ปีที่แล้ว

    Are there any errors after changing the bulbs? Also is it a problem for the adaptive high beams?

  • @mattaue
    @mattaue 2 ปีที่แล้ว

    What’s brighter the HID or the LED?

    • @zk.dailybuild
      @zk.dailybuild  ปีที่แล้ว +1

      For me, the Led turned out with better wide viability. I replaced these Led with Aukee 50w led and they are much better. Running them for the past 8 months, and there are no issues at all.

  • @richardl2259
    @richardl2259 2 ปีที่แล้ว +1

    Awesome video. How have the leds held up? Any issues?

    • @zk.dailybuild
      @zk.dailybuild  2 ปีที่แล้ว +4

      No issues at all. I retuned these ones after a week of using and found another set of bulbs which are brighter than these ones. Had them for very long time now and daily drive my car . It improved the visibility for me.

    • @richardl2259
      @richardl2259 2 ปีที่แล้ว

      @@zk.dailybuild do you mind sharing a link to the replacement led bulbs you use now? Thanks

    • @maxl7827
      @maxl7827 2 ปีที่แล้ว

      @@zk.dailybuild Link?

    • @SAVAGEONTHATRACK
      @SAVAGEONTHATRACK 2 ปีที่แล้ว

      Link?

    • @dirt2diamonds430
      @dirt2diamonds430 ปีที่แล้ว +1

      Link?

  • @jettangeles2707
    @jettangeles2707 ปีที่แล้ว

    led bulbs need to be facing the 3 & 9 o'clock to have a good cut off line

  • @cariboospeed
    @cariboospeed 2 ปีที่แล้ว +1

    Good Job!!

  • @AveGuy1
    @AveGuy1 ปีที่แล้ว

    HID is extremely yellow in real life. The camera makes the HID look the same as LED. You need to change the white balance on the camera to match real life

  • @andrzejjotuchowski2587
    @andrzejjotuchowski2587 2 ปีที่แล้ว

    My lamps are starting and turning off after 3 seconds, what could be the problem?

    • @zk.dailybuild
      @zk.dailybuild  ปีที่แล้ว

      Your xenon bulds or Ballast is gone bad.

  • @khaldahmed8977
    @khaldahmed8977 ปีที่แล้ว

    Some people they do it without ballast bay pass it its more saver

  • @jilbertm1084
    @jilbertm1084 2 ปีที่แล้ว

    You didn't disconnect or bypass the Xenon balast? I think that may be dangerous.

    • @maxl7827
      @maxl7827 2 ปีที่แล้ว +2

      It is meant to be used that way.

    • @Buzzvlogs321
      @Buzzvlogs321 ปีที่แล้ว +1

      The balast for the HID delivers a higher voltage
      Where as the driver for the LED delivers 12v
      I use the Philips high end LED
      for the high and low beam
      The light output and the beam pattern are amazing.

    • @gmcminitruck
      @gmcminitruck ปีที่แล้ว

      ​@@Buzzvlogs321 high starting voltage from the ballast is true for D2, but not for D1. They have the starter build in the square lampbase.

  • @alexandraava3034
    @alexandraava3034 ปีที่แล้ว

    👍👍

  • @dTamerSam
    @dTamerSam ปีที่แล้ว

    I prefer HID its better vision / looking .. LED I see it very random

  • @Seattle808
    @Seattle808 2 ปีที่แล้ว

    After 10-15 minutes LEDs dim down substantially compared to HIDs, there isn’t even a comparison imo

    • @zk.dailybuild
      @zk.dailybuild  ปีที่แล้ว

      I replaced this one with Aukee 50w led 8 months ago.
      For me, led seems to have better wide viability.

    • @Buzzvlogs321
      @Buzzvlogs321 ปีที่แล้ว

      Get the Philips high end one
      Forget dimming in 15 minutes
      It will not get dim for years to come.
      Trust me

    • @dreamphantltd
      @dreamphantltd 2 หลายเดือนก่อน

      ​@Buzzvlogs321 which philips model?

  • @johnjameson6113
    @johnjameson6113 2 ปีที่แล้ว

    Escalade u need a new housing

    • @zk.dailybuild
      @zk.dailybuild  ปีที่แล้ว

      Why new housing? This housing is perfectly fine.

  • @sever19851203
    @sever19851203 ปีที่แล้ว +1

    Я бы сделал лучше )

  • @johnjameson6113
    @johnjameson6113 2 ปีที่แล้ว

    D1s6

  • @zethembebenedictmbatha
    @zethembebenedictmbatha ปีที่แล้ว

    HID is better

  • @Ashley_van_Schooneveld
    @Ashley_van_Schooneveld 2 ปีที่แล้ว

    Many people are saying its a bad idea to replace HID for LED

    • @zk.dailybuild
      @zk.dailybuild  2 ปีที่แล้ว

      Not sure about the other people experiences but for me it improved the lighting and are working great. By the way I had to return these bulbs and got the other brand with more brightness.

    • @mohammadalwan5927
      @mohammadalwan5927 2 ปีที่แล้ว +1

      @@zk.dailybuild WHAT BRAND DID YOU BUY INSTEAD?

    • @gabrielluckey8968
      @gabrielluckey8968 2 ปีที่แล้ว

      @@zk.dailybuild I would like to know what brand you purchased as well

    • @SAVAGEONTHATRACK
      @SAVAGEONTHATRACK 2 ปีที่แล้ว

      ???

    • @zk.dailybuild
      @zk.dailybuild  ปีที่แล้ว

      @mohammadalwan5927 Sorry for the late reply . I have replaced these ones with the Aukee 50w led 8 months ago, and they are much better.

  • @migueldtrz8750
    @migueldtrz8750 6 หลายเดือนก่อน

    This video: How to make a change for the worse