I think this can easly be ported to esphome and integrated to Home assistant. You should share it at HA and esphome discord, I am sure this project can gain some traction. This deserve much more popularty.
I'd recommend putting a blob of silicone on the ends of each cable of the water level sensor, leaving only the tip of the metal exposed to the water. Otherwise water will enter and creep through the cables, ending up on the microcontroller.
I have followed your tutorial, a few years late, but I have enjoyed making it. The printing went well, and I have been assembling the electronics and the other bits and pieces. I have been successful in finding the right soil sensor (Amazon, and a good magnifier), and I am ready to dive into getting the circuit board made. Problem - I haven't found the dimensions of the board. Could you pass on this information? Again, I have enjoyed building this up to this point, and really wish to see it through to completion. It's been a wonderful project for a newbie, and I commend you for it!!
I'm waiting for your next video, I'm curious what app will you use to replace Blynk. Please answer whether you are continuing the project or no progress at all. Thank you, btw, I'm working on all your instructions, now it's just the stage of connecting to the application for monitoring and controlling. I hope this project continues...
Is the water level sensor wiring korrekt? @6:18 On the sensor site it's blue orange WHITE YELLOW red black and on the plug site blue orange YELLOW WHITE red black.
Wie immer seher gut erklärt. Das gefällt mir am meisten an deinen Videos bisher :) Hab dabei festegestellt, dass meine Wasserpumpe irgendwie ein bischen groß ist und ich eine kleinere brauche... xD Kommt das Video mit dem Code und der App noch vor Weihnachten oder erst im Januar? Bin schon mega gespannt darauf :D
You had asked if anyone was interested in buying a ready made version of FLORA. I haven't seen any feedback from that survey. I am still interested and I think one option might be to sell a full KIT with all the parts and instructions.
This project is amazing ... I have only one doubt: how you protect water against insects ? is there canvas to protect ? where did you buy these pieces ?
since Blynk is now a paid out thing I was wondering if we can still use blynk while paying for it? if so can you point me in the right way to upload this and set it up? I really like this project and while I found the ESPHome project for this I found out late after ordering the PCB so im sorta stuck in this one for now
Is there a discord for your project? maybe as a open source project this could "grow" so awesome. thjere are many people who want to have a coding challenge or just want to approve something already existing
Servus Martin! Ich hab jetzt ein Video nach dem anderen geschaut, alles zusammen bestellt und zusammengebaut. Jetzt muss ich lesen das die App nicht mehr funktioniert? Lohnt es sich für den normalen Benutzer wie mich, den esp zu bespielen, oder ist das dann auch verschwendete Zeit, weil die App nicht funktioniert? Würde mich über eine Antwort freuen. Gruß Andreas
Oh damn, 5 pots printed, electronics soldered together, everything assembled and now... What started out as a really professional job turns into a pipe burst. No activity for a year. Has anyone got the project up and running and can say something about the software issue? I need help or at least an approach to a software solution.
Yep, yellow and white cables must be crossed on the plug side (confirmed by checking the pin assignment in your code line 31). If already cabled, can also be fixed by replacing line 31 by " const byte waterLevelPin[] = {13, 14, 26, 27, 25}; "
I can not believe such a great video has so less interactions, great work, congrats
I think this can easly be ported to esphome and integrated to Home assistant. You should share it at HA and esphome discord, I am sure this project can gain some traction. This deserve much more popularty.
Great video
Cant wait to watch the coding part and start building this for myself
I'd recommend putting a blob of silicone on the ends of each cable of the water level sensor, leaving only the tip of the metal exposed to the water. Otherwise water will enter and creep through the cables, ending up on the microcontroller.
Hi, where can I get the correct size screws? Not on the parts list. Thanks
I have followed your tutorial, a few years late, but I have enjoyed making it. The printing went well, and I have been assembling the electronics and the other bits and pieces. I have been successful in finding the right soil sensor (Amazon, and a good magnifier), and I am ready to dive into getting the circuit board made. Problem - I haven't found the dimensions of the board. Could you pass on this information? Again, I have enjoyed building this up to this point, and really wish to see it through to completion. It's been a wonderful project for a newbie, and I commend you for it!!
I'm waiting for your next video, I'm curious what app will you use to replace Blynk. Please answer whether you are continuing the project or no progress at all.
Thank you, btw, I'm working on all your instructions, now it's just the stage of connecting to the application for monitoring and controlling. I hope this project continues...
I do want this project to get finished. I love it!
Is the water level sensor wiring korrekt? @6:18
On the sensor site it's blue orange WHITE YELLOW red black and on the plug site blue orange YELLOW WHITE red black.
I do have the Gerber files, but don't know if that is included. Thanks for your time and your expertise! From NC, USA.
I'm going to make this next week, so awesome
Fantastic project! Very intelligent guy... 👌
Nice explanation. Congrats and thanks for your time to share us!
It's crazy to know that the idea that I had and was making this weekend it's already being making for someone in another place haha.
Wie immer seher gut erklärt. Das gefällt mir am meisten an deinen Videos bisher :)
Hab dabei festegestellt, dass meine Wasserpumpe irgendwie ein bischen groß ist und ich eine kleinere brauche... xD
Kommt das Video mit dem Code und der App noch vor Weihnachten oder erst im Januar? Bin schon mega gespannt darauf :D
You had asked if anyone was interested in buying a ready made version of FLORA. I haven't seen any feedback from that survey. I am still interested and I think one option might be to sell a full KIT with all the parts and instructions.
This project is amazing ... I have only one doubt: how you protect water against insects ? is there canvas to protect ? where did you buy these pieces ?
Is it possible to scale the Flaura pot?
Pleaseeeee, the code 🥺🥺🥺
Hey Martin, Whatever happened to the kit of Flaura? Im working on a project similar to yours, would be awesome if we could collab on this!!!!!!
Very helpful videos once again. Thanks for sharing this.
Did you design the pot in fusion 360?
since Blynk is now a paid out thing I was wondering if we can still use blynk while paying for it? if so can you point me in the right way to upload this and set it up? I really like this project and while I found the ESPHome project for this I found out late after ordering the PCB so im sorta stuck in this one for now
Is there a discord for your project? maybe as a open source project this could "grow" so awesome. thjere are many people who want to have a coding challenge or just want to approve something already existing
Klasse Projekt! :) Der Thingiverse Link verweist allerdings auf ein falsches Teil.
Another Great Video were you going to release the code, or is it up to us?
Wo bleibt der Softwareteil zu diesem Projekt?
Servus Martin! Ich hab jetzt ein Video nach dem anderen geschaut, alles zusammen bestellt und zusammengebaut. Jetzt muss ich lesen das die App nicht mehr funktioniert? Lohnt es sich für den normalen Benutzer wie mich, den esp zu bespielen, oder ist das dann auch verschwendete Zeit, weil die App nicht funktioniert? Würde mich über eine Antwort freuen.
Gruß Andreas
Amazing Video, Was just wondering if it is possible to add a Light Sensor?
Wo findet man den Programmcode? Oder ist das hier ein weiteres Datenleichen Projekt?
Why didn't you use the Async Web server library of the ESP32, instead of Blynk?
how often do I need to recharge the battery?
when will the video source code be uploaded ?
Schade nur, dass kein Video mit dem Code folgt.
indeed
Is there any battery charge controller in this project ? How do you recharge 18650?
esp32 has built in battery charger on a pin
I am thinking to add DHT11 sensor to this project. But there is no space for this sensor.
Impressive!
How to setup credentials, unable to load /config page.
hey dude, i hope everything is alright there, since you didnt upload for a long time :( take care!
Hallo, please i need code for this project, please, can share it?
I don't like the use of open wires for water level sensing, as it kind of creates the same problems as resistive soil moisture sensors...
Oh damn,
5 pots printed, electronics soldered together, everything assembled and now...
What started out as a really professional job turns into a pipe burst.
No activity for a year.
Has anyone got the project up and running and can say something about the software issue?
I need help or at least an approach to a software solution.
Integration into the Home Assistant is needed.
what happened? :( will you post the last video?
Is there a way to contact you via E-Mail, etc...?
Water pump not working
Where's the code, man, where's the code?
6:21 you fucked up the order of the cables, look at yellow and white.
just wanted to let you know
Yep, yellow and white cables must be crossed on the plug side (confirmed by checking the pin assignment in your code line 31). If already cabled, can also be fixed by replacing line 31 by " const byte waterLevelPin[] = {13, 14, 26, 27, 25}; "
Where I can find code for this project?
Sell the parts please! i already 3d printed everything, i just need the parts as a kit
I AM NOT CLEAR IF THE PRINTED CIRCUIT BOARD IS COMMERCIAL OR YOUR DESIGN. BEST WISHES