Thank you so much for this video and your other SWF mas 12 videos! You are an angel! I received mine this weekend and there are so many details like this that I am trying to figure out and cannot find much documentation on. I'm trying to figure out how to set the hoop parameters! It seems they are not automatically set up for the 24x24 cm and when I try to embroider it makes a god awful sound, stops, and I have to shut it down...
I pick a hoop to center the machine and then unselect the hoop. Then trace to make sure it wont hit the sides. If you know the design is within the 24x24. It will not go crazy.
Hi have you ever had any issues running a around logo on caps my stiching looks like a messed i can't get it to stich good on the middle bottom design any ideas why? Thanks
@@Lillymaricreations Yeah I was running 500 to 450 and I just keep having the same issue on same spot middle bottom of the design looks like when the needle gets to the bottom of the design the needle just looks like is just stiching straight down don't move side to side
I have done a few caps, just not with the cap plate. Working on some Christmas embroidery project when I get them all done hopefully will run a cap on the machine with the cap plate.
@@Lillymaricreations Thank you. i was just wondering because you would think the folks have been struggling and questioning about doing caps, out of all the videos Stitchit has made they never mentioned it, even on the fb pages. I do have another plate as well.
Yup, when I got it all they said was just click the cap driver in and it's ready to go. The plate is made different and available so it's meant for something. When you google swf cap plate this pops up too.
![🔴 ฟุตบอลแชมป์กีฬา 7HD แชมเปียน คัพ 2024 [รอบ 8 ทีมสุดท้าย] - ช่วงบ่าย](http://i.ytimg.com/vi/M0S_ReCIkxg/mqdefault.jpg)
Thank you so much for this video and your other SWF mas 12 videos! You are an angel! I received mine this weekend and there are so many details like this that I am trying to figure out and cannot find much documentation on. I'm trying to figure out how to set the hoop parameters! It seems they are not automatically set up for the 24x24 cm and when I try to embroider it makes a god awful sound, stops, and I have to shut it down...
I pick a hoop to center the machine and then unselect the hoop. Then trace to make sure it wont hit the sides. If you know the design is within the 24x24. It will not go crazy.
Hi have you ever had any issues running a around logo on caps my stiching looks like a messed i can't get it to stich good on the middle bottom design any ideas why? Thanks
Are you running your designs 550, if not, try decreasing it to that area.
@@Lillymaricreations
Yeah I was running 500 to 450 and I just keep having the same issue on same spot middle bottom of the design looks like when the needle gets to the bottom of the design the needle just looks like is just stiching straight down don't move side to side
Sometimes, it can be the design .
Have you tried with cap
I have done a few caps, just not with the cap plate. Working on some Christmas embroidery project when I get them all done hopefully will run a cap on the machine with the cap plate.
@@Lillymaricreations Thank you. i was just wondering because you would think the folks have been struggling and questioning about doing caps, out of all the videos Stitchit has made they never mentioned it, even on the fb pages. I do have another plate as well.
Yup, when I got it all they said was just click the cap driver in and it's ready to go. The plate is made different and available so it's meant for something. When you google swf cap plate this pops up too.