Practice with some designs you enjoy, but keep it simple till you get the hang of it, then ask a few friends for fun ideas that would make no sense and do them any way. You might stumble on a new idea or issue that will be random but helpful. I got sent a cat meme and asked about waffles, the picture was dark so I had to spend extra time redesigning the image to fit a quality that was printable and then the words to fit into my 4x4. was a fun challenge of sorts but after 5 hours on Hatch 3 I'm confident in almost any simple designs.
Hi! For fill stitches: -A common range for fill stitch density is around 5 to 12 stitches per inch (SPI). -For lighter fabrics or more intricate designs, you may want to use a higher density (e.g., 8 to 12 SPI). -For heavier fabrics or simpler designs, a lower density (e.g., 5 to 8 SPI) may suffice. For satin stitches: -Satin stitches, being a type of decorative stitch used for outlining or detailing, typically have a higher density than fill stitches. -A typical range for satin stitch density is around 7 to 15 stitches per inch (SPI). -Satin stitches with higher densities (e.g., 12 to 15 SPI) result in smoother and more solid lines, ideal for fine details or lettering. -Lower densities (e.g., 7 to 10 SPI) can be used for broader satin stitches but may appear less smooth and solid.
I would like to know if its possible to do embroidery on a thick yarn with a large gauge and see the capabilities of the software and a real test result.
Hi! Here is a good resource > support.ricoma.com/hc/en-us/articles/360045464973-Losing-Registration#:~:text=%2DIf%20it%20goes%20too%20far,it%20is%20Electrical%20in%20nature.
Choosing a jump stitch over a trim stitch helps maintain design continuity, protect delicate fabrics, speed up production, ensure a cleaner backside, and reduce the risk of threads unraveling, especially in closely spaced elements, while trim stitches are better suited for larger gaps to avoid visible threads.
Of Course. Please go to your customer portal and take the pre-training classes. Once they are complete, you can then set up an online training session with one of our specialist.
Of Course. Please go to your customer portal and take the pre-training classes. Once they are complete, you can then set up an online training session with one of our specialist.
"...Chroma digitizing software comes with your embroider machine package..." That statement is some what disingenuous. You need to interpolate " based on your region of purchase" Good content as usual tho.
Hi! We try our best to be there every step of the way, we provide the training when you purchase a machine with us! Please submit a request with the team so they can help you get started -----> ricoma.com/US/contact-us
Hi there! We recommend using Chroma! The software is designed to allow both the novice and experienced digitizer to create even the most intricate designs with ease and speed. Become a digitizing pro in no time with an easy-to-use interface, built-in styles, and customization tools!
hello, I have a problem with the design program (chroma inspire) when I do auto digitizing in my program it outputs 2 colors and in my embroidery machine it reads 95 colors as a result it cuts the thread continuously my export becomes dst
I am having a hard time justifying the Luxe version of the software. I dont want to spend that much money and then have a hard time learning and having to spend money having people digitize for me.
@@ricomatv it's not so much the training. It's the cost of luxe. I don't know if I want to spend that much money to find that it's not as full featured as other programs. $1400 is a lot as a single payment.
I didn't get the Chroma digitizing software with my Ricoma and the customer service is not helpful at all with the Issue, it's been almost a year now this is really frustrating
What are some digitizing do's you recommend? Comment some below!
Spent the last 2 months researching embroidery and digitizing in particular and I think I’m ready to pull the trigger on a Ricoma machine.
We are so glad to hear this! Please let us know if you need any help :)
Do your research before making a decision you may regret.
Practice with some designs you enjoy, but keep it simple till you get the hang of it, then ask a few friends for fun ideas that would make no sense and do them any way. You might stumble on a new idea or issue that will be random but helpful. I got sent a cat meme and asked about waffles, the picture was dark so I had to spend extra time redesigning the image to fit a quality that was printable and then the words to fit into my 4x4. was a fun challenge of sorts but after 5 hours on Hatch 3 I'm confident in almost any simple designs.
We appreciate your input and wish you luck on your journey!
Excellent, my friend! Thanks so much!
Thank you too!
Thanks again for the great tips!!
You are so welcome!
OMG this seems so overwhelming but looking forward to learning.
We got you every step of the way! Congrats on starting this journey :)
Thanks for sharing
Thanks for watching!
whats a good density for fill stitches in mm? and for satin stitches?
Hi!
For fill stitches:
-A common range for fill stitch density is around 5 to 12 stitches per inch (SPI).
-For lighter fabrics or more intricate designs, you may want to use a higher density (e.g., 8 to 12 SPI).
-For heavier fabrics or simpler designs, a lower density (e.g., 5 to 8 SPI) may suffice.
For satin stitches:
-Satin stitches, being a type of decorative stitch used for outlining or detailing, typically have a higher density than fill stitches.
-A typical range for satin stitch density is around 7 to 15 stitches per inch (SPI).
-Satin stitches with higher densities (e.g., 12 to 15 SPI) result in smoother and more solid lines, ideal for fine details or lettering.
-Lower densities (e.g., 7 to 10 SPI) can be used for broader satin stitches but may appear less smooth and solid.
Thank you
Glad we were able to help!
Just got our Ricoma FPA-1208, Decal Project from Mindanao, Philippines.
Welcome to our family!
2:32 Nice to see my school represented!
Nice! Thanks for watching!
I would like to know if its possible to do embroidery on a thick yarn with a large gauge and see the capabilities of the software and a real test result.
The largest needle you can use on our machines is a size 90. Thick Yarn will not work if it cannot pass through the eye of the needle.
Please explain "loss of registration". Is this pulling of material?
Hi! Here is a good resource > support.ricoma.com/hc/en-us/articles/360045464973-Losing-Registration#:~:text=%2DIf%20it%20goes%20too%20far,it%20is%20Electrical%20in%20nature.
Why would one need to choose a jump stitch over a trim stitch?
Choosing a jump stitch over a trim stitch helps maintain design continuity, protect delicate fabrics, speed up production, ensure a cleaner backside, and reduce the risk of threads unraveling, especially in closely spaced elements, while trim stitches are better suited for larger gaps to avoid visible threads.
Im not a ricoma customer.i already bought a machine .now i recently came to know ur channel.is it possible for non ricoma customers to learn this ?
Of course! Plenty of have that
hi which app to design 3D objects embroidery help me
You can use Chroma to make 3D puff designs
I bought 2 ricoma machines from you I don't know how to start please help me
Of Course. Please go to your customer portal and take the pre-training classes. Once they are complete, you can then set up an online training session with one of our specialist.
Thanks !
No problem!
Hello sir I bought 2 recommended from you but don't know how to start
Of Course. Please go to your customer portal and take the pre-training classes. Once they are complete, you can then set up an online training session with one of our specialist.
Nice Machines! I’d love to add them to the our network platform
Hi Kai! Let us know if you have any questions, we would love to help!
"...Chroma digitizing software comes with your embroider machine package..." That statement is some what disingenuous. You need to interpolate " based on your region of purchase" Good content as usual tho.
We appreciate the feedback!
I want to buy a machine and start. Seems overwhelming though
Hi! We try our best to be there every step of the way, we provide the training when you purchase a machine with us! Please submit a request with the team so they can help you get started -----> ricoma.com/US/contact-us
I bought my Ricoma machine but didn't get the Chroma Digitizing Software package... how will you assist me?
Hi there, are you located in the US?
I recently bought my Ricoma machine, the Chroma Digitizing Software package didn’t come with it though.
Can I be assisted?
I’m from Uganda..
WHAT IS THE BEST FREE SOFTWARE ? i CANT FIND ANY TO DO MY OWN DESIGNS
Hi there! We recommend using Chroma! The software is designed to allow both the novice and experienced digitizer to create even the most intricate designs with ease and speed. Become a digitizing pro in no time with an easy-to-use interface, built-in styles, and customization tools!
How much digitalize software?
Hi! Check out the prices through here > ricoma.com/US/software/chroma
Hi henry. Im interested to start an embroidery business. Maybe I could ask you some questions? Thank you.
Go ahead and ask away!
i have a problem with chroma inspire
Hi there! Can you please provide us with more information?
hello, I have a problem with the design program (chroma inspire) when I do auto digitizing in my program it outputs 2 colors and in my embroidery machine it reads 95 colors as a result it cuts the thread continuously
my export becomes dst
What is programe name? Please
Hi! It's Chroma > ricoma.com/US/software/chroma
Interested in EM-1010. When I try to request a quote on your website, it says my phone number is not in range(?). It does not let me submit.
Hi there! Please send us a message with your contact information on our IG so we can help! --->@Ricomahq :)
subscribed 😅
Welcome to the family!
I want to buy an embroidery machine can I help I am in Morocco
Hi there! We would love to help, please submit a request with the team through this link ---> ricoma.com/US/contact-us
Subscrided
Thanks for the love!
I am having a hard time justifying the Luxe version of the software. I dont want to spend that much money and then have a hard time learning and having to spend money having people digitize for me.
Hi there, did you need help with training?
@@ricomatv it's not so much the training. It's the cost of luxe. I don't know if I want to spend that much money to find that it's not as full featured as other programs. $1400 is a lot as a single payment.
I do!! @@ricomatv
If luxe version had a monthly payment. That would be awesome. Instead of paying it all 1 time.
Hi! You can actually finance the Chroma software through a third party at checkout!
hello all i m digitizer
What Software do you use?
I didn't get the Chroma digitizing software with my Ricoma and the customer service is not helpful at all with the Issue, it's been almost a year now this is really frustrating
Hi there! We are so sorry to hear this, are you located in the US?