You can put a center punch in your drill press chuck, so when you tap you can put constant pressure on the tap handle while also keeping it centered. It also helps to use oil. I'm not hating, just trying to help out. Love the channel, keep it up!
@@ВикторБецко well, i think the whole point is so that he didn't have to continue living his "average" life. All the others bees were content with the whole "work until you die" thing and so he just wanted to escape from that. I big concept they underplayed was that the main character was not BORN to leave the hive and collect honey. He was simply a worker. If they wanted, they could have swung the plot into this whole "you can do anything" sort of direction. But I'm glad they kept it light-hearted instead. Just a bery fun film. But then again, i have no idea what you said and so maybe you don't care to hear about my thoughts in the Bee Movie?
The most intriguing and technical how to on knife jigs on the net. I usually skip to the end to see the final results then decide if I want to watch the video or not but not with this one! Fine video, video editing and the jig looks to work great!
Commenting again. Great jig in my humble opinion! Just some thoughts though. You bought that super fancy belt sander, but why not a bench grinder? If you're going to sand, just get sanding discs for your angle grinder. And like someone else said, cheers for a "non-welding" jig....and versatile too! Like it a lot! BTW, do you have plans, or a general drawing/parts list for this? Thx for the great idea.
Awesome jig. Can someone please tell me what kind of bolts the springs are hooked to? I really want to make one of these. Otherwise i will have to fabricate something else to attach the springs.
Robert Graybill That is an amazing idea that i would of never thought of. I was racking my brain on that too. Thank you for taking the time to share that with me brother.
Very nice, often the tools you need to do the actual work are never thought of until after you've tried and failed a few times. I think I will try to make one of these. Hi from TX
@@marekesteinjedrez6531 bueno lo que yo veo aquí es que el artilugio lo a hecho para poder variar el angulo de afilado a su antojo y que valga para cuchillos distintos, para afilar un cuchillo no te merece la pena.
love it ,my filing days are over ,only problem I don't have a belt grinder ,but thinking I can do the same job with a bench grinder on the wheel .do u think this would work ,cant see why not.
drill a hole through the backplate and the front plate and attach the spring. you might have to cut a little channel so the knife lays flat on the front.
@@liquidfire1206, did you not see him snap that tap off in the piece? That's what's likely to happen when you dry tap; it's also, generally, quite difficult to extract broken taps and can necessitate trashing the piece and starting over. Taking just a few seconds to apply oil can make life so much easier. Otherwise it was a great video.
@@ThatBassistK i saw it break off, but never having tapped anything myself, i didnt know what he was doing wrong. I thought he misaligned the tap in the hole. It makes more sense now, thanks!
@@liquidfire1206, it's something we've all done when we get in a rush but you *should* always lubricate when drilling or tapping, especially hardened steel. Glad I could be of some worth today.
When making my jig, I realized, why make the jig, angle adjustable when my grinder work table is easily adjustable. Easier to leave the jig at 90 degrees and adjust the table for bevel angle.
![ILLSLICK - THE KING'S LANDING [Freestyle]](http://i.ytimg.com/vi/feIJJnNkTfk/mqdefault.jpg)
Finally a jig that requires no welding...THANK YOU
Check out yard sells I got one for 40$.
@@grnnt123 \
@@grnnt123 link?
@@Xtafa sorry no links, I was just going to random local yard sells
Yeah, this one isnt as simple but it works really well
Just want to say "thanks" I built this a few months ago and it changed my knife making.
I just finished making one and it's gonna be great to use. Thanks!!
Отличную приспособу для спусков клиника зделал! А главное из подручных и простых железяк.👍класс
You can put a center punch in your drill press chuck, so when you tap you can put constant pressure on the tap handle while also keeping it centered. It also helps to use oil. I'm not hating, just trying to help out. Love the channel, keep it up!
Respect when you broke the thread cutter and didn't edit it out.
Its a tap you know hes tapping dat
A bit of oil would of helped
@@TheRogey1 Would have*
Alright this guy knows how to do a video. Fast forward right off the bat 👍
So cool that you cut this all with an angle grinder
Thank you for making my life 10 times easier!
What a cool Tool.
The right for Knifes,easy to build.
Sincerelly Paul
Ooooooooooooohhhh!!! I had a hard time following the way it worked until you started using it. SMART! Good job!
Guy H. That was my exact thought at the end.
Spring action is awesome👍👍
You're an awesome maker, man. Your projects and videos alike are very high quality.
Someone needs to tell this guy about using some oil when drilling/tapping steel lol
В вторник попробую сделать самому! Thanks 😊
Now that is pretty cool to see
Nice job there. Remember oil when drilling and tapping.
never saw so many holes D&T w/o lube, omg....
@@carbonitegamorrean8368 Это вам не hss, это р9, вероятнее всего.
@@ВикторБецко well, i think the whole point is so that he didn't have to continue living his "average" life. All the others bees were content with the whole "work until you die" thing and so he just wanted to escape from that. I big concept they underplayed was that the main character was not BORN to leave the hive and collect honey. He was simply a worker. If they wanted, they could have swung the plot into this whole "you can do anything" sort of direction. But I'm glad they kept it light-hearted instead. Just a bery fun film. But then again, i have no idea what you said and so maybe you don't care to hear about my thoughts in the Bee Movie?
Шикарная приспособа хорошая идея и куча сыкономленных денег, золотые руки у мастера, респект и уважение!!!😊😉😄😃😀👏🖒👍👌💪🏅🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
If you're making cuts like that with a grinder, i'm pretty convinced you don't even need the jig for your bevel grinds.
exactly --
i've never used one, i've wanted to make one and glad i never did. still might though, just for speed.
Jonathan Flynn so I’m not the only one who thought his cuts were beautiful?
@@okay3298 definitely not, he 100% a robot
Amazing cutting skills with the angle grinder
Well, if you're ANYTHING like me, you NEED A JIG! There is ZERO WAY that I can even come close to even, proper angles free-handing it.
Thanks for sharing. What grit is the is on your sander.
The most intriguing and technical how to on knife jigs on the net. I usually skip to the end to see the final results then decide if I want to watch the video or not but not with this one! Fine video, video editing and the jig looks to work great!
I let out an "awwwggghhhh" when the tap broke. Smashing vids keep up the good work.
Dude ya i hate that😂
Commenting again. Great jig in my humble opinion! Just some thoughts though. You bought that super fancy belt sander, but why not a bench grinder? If you're going to sand, just get sanding discs for your angle grinder. And like someone else said, cheers for a "non-welding" jig....and versatile too! Like it a lot! BTW, do you have plans, or a general drawing/parts list for this? Thx for the great idea.
If he does I want one!
Is there a chance you could upload prints of this? Awesome and clever jig 👊🏼
After using this jig is there anything that you would change on it, Im going to make one myself.
Dova Poti t ut
Genius! Is this your design and may I copy it?
absolutely great, can I buy you a copy?
I am not equipped to make it myself thank you !
You are a creative person
awesome
My heart broke for you when your tap broke off in that hole I’m glad it wasn’t too difficult for you to get it out though
Woah, that deflection in the drill press table.
What do you mean
Good work! Keep up! Da nisi iz Srbije? Poznat mi je taj alat iz Woby Housa :P
Awesome jig. Can someone please tell me what kind of bolts the springs are hooked to? I really want to make one of these. Otherwise i will have to fabricate something else to attach the springs.
Dave Martinelli, you can use "machine screw sling studs" for rifles
Robert Graybill That is an amazing idea that i would of never thought of. I was racking my brain on that too. Thank you for taking the time to share that with me brother.
Dave Martinelli, no problem brother, glad I could help :)
Excellent job !!
Did you make the little pins that you attached the spring to ??
Very nice, often the tools you need to do the actual work are never thought of until after you've tried and failed a few times. I think I will try to make one of these. Hi from TX
Спасибо за контент
Really good jig ! But why you didn't youse ans taper-oil ?
А на гриндере прижимная пластина стальная или керамогранит?
A lot of damn work but awesome results! Good job!
put some oil to thread, this is why it broke at 4:34. You can drill whit oil too, better to lubricate ;)
You are nice engineer.😎
Bueno después de tanto taladro y tanta rosca tiene su utilidad, ahora entiendo el porqué de esos afiliados tan perfectos.
Enhorabuena por el vídeo.
me parece que con unas maderas lograba el mismo resultado y sin cortar y perforar tanto metal!! Muchos agujeros y mucha rosca!!
@@marekesteinjedrez6531 bueno lo que yo veo aquí es que el artilugio lo a hecho para poder variar el angulo de afilado a su antojo y que valga para cuchillos distintos, para afilar un cuchillo no te merece la pena.
love it ,my filing days are over ,only problem I don't have a belt grinder ,but thinking I can do the same job with a bench grinder on the wheel .do u think this would work ,cant see why not.
colin anderson the only thing is that a belt grinder, grinds flat but a bench grinder grinds rounded
I seen your homemade vise man, that's awesome. Nice video on the jig!!
Good idea,
Awesome jig! How much do you want for it??
I thought the springs were a really good idea. Nice work!
excellent bit of craftsmanship, i fear trying to make this would cause me to say a great many rude words.
Great jig dude, its simple just what I needed.
I like it I think I will make one thanks mate
Good job
Perfect!!!
Świetne wykonanie 👌🛠️
Great job! Are you still selling these?
I'm working on one of these. Where did you get the hardware the springs are hooked to and what are those called?
Justyn Uhl
Hi I’ve found some on eBay or RS Component have them : good luck
drill a hole through the backplate and the front plate and attach the spring. you might have to cut a little channel so the knife lays flat on the front.
Using cutting oil with a thread tap makes a huge difference. You'll break less.
THANK YOU!!!!
9:10 what angle are you using for that grind?
Of course!!!! This video will change my game!!!
That’s brilliant mate but if you put a strong magnet on it my not need grips
Dave Beggers what is you do a stainless steel blade?
I really like your videos ,keep doing
Extremely helpful! Thank you very much and Merry Christmas!
Is it jus me,but I love fast forward sounds
nice work
Nice stuff you can make with cut -offs, just àmazing too, you finished rfb btw, made that up, lol
But why didn't he use cutting oil for tapping?
super good bevel jig, good idea
thanks
Вопрос возникает только один, где взять пружины
Hola muy bueno me gustó más que otros que he visto
At 7:49 what is this type of screw ?
What a great idea. Thanks
What's up with all the dry drilling and tapping?
Do you want to break a tap, because that's how you... Yep, saw that coming.
@@ThatBassistK whats wrong with how he taps?
@@liquidfire1206, did you not see him snap that tap off in the piece? That's what's likely to happen when you dry tap; it's also, generally, quite difficult to extract broken taps and can necessitate trashing the piece and starting over. Taking just a few seconds to apply oil can make life so much easier. Otherwise it was a great video.
@@ThatBassistK i saw it break off, but never having tapped anything myself, i didnt know what he was doing wrong. I thought he misaligned the tap in the hole. It makes more sense now, thanks!
@@liquidfire1206, it's something we've all done when we get in a rush but you *should* always lubricate when drilling or tapping, especially hardened steel. Glad I could be of some worth today.
What is this tool used for?
Thanks a lot !
Made with no welds, but welding it wouldve been more time efficient...
Koss is so good at angle grinding he could perform open heart surgery with it
No, you should out Nik on bad obsession. He's on another level.
Where do I get one of those badass grinder blades that gets bigger as you use it?
Please learn to use gloves for your projects, especiall with a drill press. Take care of your hands!
Another great video!!! Thank you for sharing.
Freehand grinding ftw, nice jig tho !
I know right
Fritz H.CustomKnives I feel ya it's nice to do both though
slt , serait il possible de mettre les plant de construction .merci
Hi, would it be possible to put the construction plant.
Muito bom gostei tanto que vou fazer um
When making my jig, I realized, why make the jig, angle adjustable when my grinder work table is easily adjustable. Easier to leave the jig at 90 degrees and adjust the table for bevel angle.
very nice thanks
Can you share the plans for this?
What are the dimensions of the metal you used please
Remember! Always buy your tap and die with some WD-40.
Also. Thank you! I needed this tool!
great 👍🏼
Aluminum cools much better!!!
👍👍👍
Muito complicado para poca coisa.
あなたが神か
How much can I pay u to make me one
Kason Kelly make you own man.. not hard at all
Kason Kelly
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F122924451140
I don’t understand how everyone has same bevel on both sides 🙄 if i set same angle all my one side of knife has diferent bevel than other side :/
The bevel you originally cut might be offsetting your piece on the jig, could be wrong but thats what it seems like
Метчик нужно было литолом смазать!
Лучше трансмиссией
Don't break your tap. 😄😄😄
😎👍👍👍💣
Good
Geniale
Hiç yapmasan daha iyi olurdu
Ustalıgında bir onuru var
It took you less than 10 minutes to make. How about making me one!
Meh sambat kaleh sinten ..yen sampun mekaten