Hey man thank you so much for making this, I dropped my clippers by accident and the top came out. Because of this video I was able to able to put it back together
Thank you so much for your video. You just saved me about an hour of fiddling and cursing, and saved my family having to deal with a grumpy dad as a result of it.
only person online that actually shows thee orientation of both blades. my clippers disassembled while using them a moment ago and you helped me get it back together. appreciate you
Thank you so much! I thought my brand new clippers were blunt and useless and i was already shopping around for clippers 4 times as expensive and then happened to search and found this video. In 15 min my clippers were just cutting so fine! They had come with a gap of almost 2mm or more. Thanks once again from Mumbai, India.
This was a tremendous help! I always have a hard time shaving because of my curly hair. Even my hair clippers had a hard time. Took them apart and followed your instructions, then they went through my hair like a hot knife through butter.
Thank you very much. So appreciated. Thanks for taking time to watch and comment. I feel the same way too and wish more videos add just a bit more detail. Cheers
Thank you, this is the best Wahl clipper adjustment video I've seen, easy and precise. I had taken my wahl apart to clean awhile ago and it never seemed to work right afterward, after watching this video and adjusting my clippers per instructions they cut better than when I purchased my clippers. Cut my hair in half the time as last time. Again, Thank you!
Thank you so much! I was shaving a goat and dropped the clippers in the feed bucket. I took it apart and cleaned it out but it wouldn't work right after I did that. This got my clippers going and we are ready for the goat show now!
Literally saved my clippers from being thrown out in frustration! With hairdressers closed in Melbourne under covid-19, I've become the family hair dresser. These are now going strong 17 years since purchase with no sharpening! 7 of those years were hopeless until I found your video 🙌🏻
Thank you so much for this video! I had taken my clippers apart to clean them, oiled and put back together. Then I tightened everything up ... and they didn't work anymore. Your video helped me figure out what I did wrong.
Thank you. I've got a sharpening business and will be doing clippers for a customer soon. I've sharpened my own with plenty of success, but none of the videos on sharpening them that I've found cover this important step
I thought i already tried these steps... and I was just about to sell my clippers because I thought they needed repair and you helped me fix it between turning the dial and lining it up properly I can keep cutting my hair.
Thank you for the Tutorial!. I had been struggling to cut my hair with a lot of tears..but now after follow the tutorial and it works without hurting my hair anymore.
Thank you very much for the video. My clippers were catching and dragging on my hair, obviously not cutting. I thought the blade was blunt, but it was out of alignment. Thanks to your video, they're fine again. 🇦🇺
My clippers weren't cutting. They were moving side to side but they weren't cutting. Aligning them like you said; right side of the blade on the fat part and the left side of the blade aligned with the 2nd thin triangle, and also pushing the blade "up" a bit closer to the edge fixed my problem. Thanks!
To repeat the same thing that's the last person said thank you so much for taking the time to make this video I was beside myself as to how that went back together and I was on the verge of drilling the holes bigger until I seen your video thank you very much for taking the time to do this you have a great day and I hope you have a great year ahead of you God bless you
Thanks man, I thought I lost my clipper when my son dropped it and the top blade shifted from its position and looking at afterwards, pulled it off. God bless you for this video.
Thanks for the video,Had my trimmer for years and recently its not been as good.Took off blades and was surprised at how much hair was caught inside.Taking it for a test run tonight.
Thank you so much! This is the first video I found that actually helped me. Now I can finally cut my dog’s hair again. He’s a Komondor...lots of hair :)
Thank you for watching my video! Really appreciate your comment! Glad it helped out! I had to google 'Komondor'.... dayum... you'll definitely need a WAHL to cut through all that fur! hahaha Good luck! Cheers
@@lmbpros *I haVe thaT saMe eXacT cLippeRs modeL.! WouLd you mind bRoTheR doinG a video tuToRiaL on hoW to fiX and repaiR thaT "whiTe thinGy" aT the (**0:01** & **0:30** sec.) maRK.?! Mine feLL oFF and I haVe no idea hoW to reaTTaCh iT...!!?!!!!?* 😢 😠 🙏
Going to try this. Had my wahl Clippers for years. Just cut my hair today and it was uncomfortable. Very sharp and I have cuts all behind my head bleeding and very sore right now 😅
I dropped my clippers and they started having this really annoying noise. Just found out that it had messed up with the power setting when I dropped it. Thanks for the video!
Wow! Funny how my clipper stopped working, didn't know what to do even though people said it shouldn't be blunt so quickly, seeing it's just a month old. I'm new to barbing. Will give this a try once I get back to work. Thank you so much.
Thank you, an absolutely great video, very well explained and presented, I dropped my Wahl recently (oops!) and was not cutting and now thanks to you and this video, it is working perfectly again Thanks again Take care Sam
@@lmbpros 🚨 *I haVe thaT saMe eXacT cLippeRs modeL.! WouLd you mind bRoTheR doinG a video tuToRiaL on hoW to fiX and repaiR thaT "whiTe thinGy" aT the (**0:30** sec.) maRK.?! Mine feLL oFF and I haVe no idea hoW to reaTTaCh iT...!!?!!!!?* 😢 😠 🙏
Thanks for the vidéo. It is very helpful. I’m just wondering how to adjust my clipper to reduce vibration. My clipper has just an adjustment screw just next to the blades and I’m turning it trying to find the best adjustment but it keeps vibrating and my hand becomes numb. Do you have an advice to help me, please? Thanks in advance!
Excellent video! Question, I've taken my wahl apart. The vibrating "arm" seems to be clacking against the shroud even with top cover off. If tilted, motor will even stop as it must be striking the lower shroud somewhere. Do you have any thoughts? I would hate to throw out $40 clippers for something mechanical. My clipper is exactly the same as the one on the left in screen at "0.07"- no spring. Thanks if you have the time to answer.
I want to align like my Limural wireless was stock, I installed ceramic blades and I'm basically at a Zero gap. I want stock alignment so I can do a proper 0.5/1/2 fade.
Thumbs 👍 bro, am from Uganda and was abt to throw mine away then I found yr video and gues wat!,ma machine is,more shaper compared to even wen it was brand new thanks alot
th-cam.com/video/Wb1w46_7As4/w-d-xo.html I made a video about this. You can replace the vibrating arm, but hopefully your official Wahl spare part website stocks the Particular model. Good luck
Im really strugglin with the black screw. I do everything same as you but at the end when its all done. Its loud, then i make it quiet same as ypu, but then the upper knives are too "right - >" positioned. Then when i cut hair i notice is not as good as it was before. Please help
Hi Thanks for watching! Not sure what else I can add to what I've already said in the video. You'll just have to keep positioning the blades until it's just right using your sight/judgment. You also probably know that when you tighten the screws back in place, the blades will move. It's just a matter of keep doing it 'til you you get it in the right position. Getting the screws in with just the right amount of tightness is another thing to consider Sorry if Im not helpful. Hope you get it right.
I know what you mean! 🤣 If you don't have that tiny sponge bit that 'traps' the hair and 'prevents' hair getting inside the cavity of the clipper, you can buy them from your local Wahl supplier/website.
How come your bottom blade spring doesn’t pop up? On my clippers my bottom blade spring does, which makes zero gapping hard to do because I have to hold down the bottom blade while trying to align it with the top. How are you keeping the tension on your bottom blade?
great video sir. thank you so much. i think what there is a problem with my clipper. the white "arm" that it below the cutter blade is not straight because when i put upon it the cutter blade, it bends on one side. can i do anything about it?
Hi, thank you for the comment! Thanks for watching! From my what I know (Im no expert sorry), the white head that connects to the vibrating arm should never be bent. The only reason I can come up why it can be bent is that the unit has been dropped head first. I highly not recommend messing with the internals of the clipper ( I have wrecked one of my WAHLs :( trying to mess around inside ) However, since yours is already bent to one side, you can attempt to straighten it out as the metal that the white piece is connected to is quite bendable. That soft metal should only bend upwards and downwards. If you're saying bends on one side, meaning left or right then something is definitely wrong. Always bring back to your retailer if under warranty! dont open the case as it voids warranty! good luck. sorry cant help much. I tried google this topic but very few hits. you can replace the vibrating arm though here is a link for an australian store barberco.com.au/vibrator-arm/
Sorry im confused- so i bought a Wahl balder 3 or 4 years back but never used it because of the loud noise. I fished out again during lockdown. Do I need to a) adjust the blades as shown 2) change the black adjustment screw 3) both. If I make it quiet by adjusting the screw, will that affect the cut? Thanks!
Hi thank you for watching! I'm no expert but for me personally, I always clean out my clippers after every cut so I have to align the blades after cleaning. I don't always tune/power-up the black adjustment screw. If you turn it on and as I've shown (be careful not to cut yourself) by pinching the blades and your pinching stops the blades then tune/adjust/power-up by adjusting! cheers
I did the same. But when I place the lever up ,then looks all crooked. Then lever down and make the blades together is all good. Goes crazy when its up
@@lmbpros How come your bottom blade spring doesn’t pop up? On my clippers my bottom blade spring does, which makes zero gapping hard to do because I have to hold down the bottom blade while trying to align it with the top. How are you keeping the tension on your bottom blade?
Had the hair pulling problem on my Wahl clippers. Watched this video, followed the steps and problem solved. ❤
Thank you for sharing this info.
Thank you for taking time to leave a comment. Really appreciate it. Glad it worked out about! Cheers!
That Pokémon ruler was hard af.
Everybody gangsta until he pulls out the Pokemon Go ruler
Bruh
lol. Cheers!
Yea, kinda regret that. I got a new generic ruler now. lolol
Hahaaaaa
😂😂
Lol I immediately scrolled to the comments when he whipped out that gem
Out of the three videos on zero-gaping Wahl clippers I watched this one is the best, both in close-up picture and explanation. Thank you!
Thank you for watching! Really appreciate the comment. Cheers!
Your video was way more helpful than the one from Wahl. Thanks for taking the time to share your expertise!
Thank you for the comments. Really made my day! Glad it helped out a bit. Cheers. Thanks also for taking time to watch and leave a comment!
Hey man thank you so much for making this, I dropped my clippers by accident and the top came out. Because of this video I was able to able to put it back together
Thank you for the comment! Glad it helped you out a bit. Really appreciate for the comment! Made my day! Cheers
Thank you so much for your video. You just saved me about an hour of fiddling and cursing, and saved my family having to deal with a grumpy dad as a result of it.
Thank you for taking time to leave a comment! Really appreciated. Glad it helps out a bit! Cheers
only person online that actually shows thee orientation of both blades. my clippers disassembled while using them a moment ago and you helped me get it back together. appreciate you
Thank you so much! I thought my brand new clippers were blunt and useless and i was already shopping around for clippers 4 times as expensive and then happened to search and found this video. In 15 min my clippers were just cutting so fine! They had come with a gap of almost 2mm or more. Thanks once again from Mumbai, India.
Thanks for watching! Really appreciate your comments and glad it helped!
@@lmbpros why u didn't give heart for his comment
which one did you buy?
@@deep_z Kubra kb-309
This was a tremendous help! I always have a hard time shaving because of my curly hair. Even my hair clippers had a hard time. Took them apart and followed your instructions, then they went through my hair like a hot knife through butter.
Thank you for your comment! Really appreciate that you took time to reply. Glad it help!
This expert detail is missing in other videos. 🎉 Super thanks for the help and advice.
Thank you very much. So appreciated. Thanks for taking time to watch and comment. I feel the same way too and wish more videos add just a bit more detail. Cheers
Thank you so so much for this video. I really couldn't figure it out why my clipper was buzzing this loud. I'm glad I found your video. Thank you!♥️
Thank you for your comment! Glad it helped! Appreciate it!
thank you so much, my clipper wasn't trimming anything at all anymore but after your tutorial it's now cutting again
Thank you for taking time to write a comment! Really appreciate it! Glad it helped out a bit 🥰
Thank you, this is the best Wahl clipper adjustment video I've seen, easy and precise. I had taken my wahl apart to clean awhile ago and it never seemed to work right afterward, after watching this video and adjusting my clippers per instructions they cut better than when I purchased my clippers. Cut my hair in half the time as last time. Again, Thank you!
Thank you very much for your comment. Thanks for taking time to write it. Really appreciate it. Cheers! Glad it helped out a bit
Thank you so much! I was shaving a goat and dropped the clippers in the feed bucket. I took it apart and cleaned it out but it wouldn't work right after I did that. This got my clippers going and we are ready for the goat show now!
Thank you for taking time to comment! Appreciate it. Glad it helped out abit! Cheers!
😂😂
Literally saved my clippers from being thrown out in frustration! With hairdressers closed in Melbourne under covid-19, I've become the family hair dresser. These are now going strong 17 years since purchase with no sharpening! 7 of those years were hopeless until I found your video 🙌🏻
Thank you for your comment! Appreciate it! Glad it helped out. Also it took me forever to understand what 'zero-gap' was lol
Did not show puting blades on
Don't worry, we'll all be locked up again after the election...
Thank you so much for this video! I had taken my clippers apart to clean them, oiled and put back together. Then I tightened everything up ... and they didn't work anymore. Your video helped me figure out what I did wrong.
Thank you for your comment! Really appreciate you took time to reply. Made my day! Glad it helped out a bit! Cheers
Hey I did the same thing and now they don’t work can you tell me how what was wrong with it
@@joshuanavarro2734did you ever figure out what you did wrong with your clippers🤔
Thank you for your great video. That helped me put my clippers back together after the screws fell out!
Thank you for your comment! Really appreciate it! Glad it helped!
Simplest and most useful Wahl razor adjusting video on youtube. Thanks!
Thank you very much for your comment! Really appreciate it. So glad it worked out for you!
Thank you. I've got a sharpening business and will be doing clippers for a customer soon. I've sharpened my own with plenty of success, but none of the videos on sharpening them that I've found cover this important step
Thank you for your comment! Really appreciate it! Wish you the best for your business for 2024! Thanks for taking time to leave a comment. Cheers
I thought i already tried these steps... and I was just about to sell my clippers because I thought they needed repair and you helped me fix it between turning the dial and lining it up properly I can keep cutting my hair.
Wool! Glad it worked out. Cheers for the comment! Appreciate you taking to comment! Thx!
Thank you for the Tutorial!. I had been struggling to cut my hair with a lot of tears..but now after follow the tutorial and it works without hurting my hair anymore.
Thank you for taking time to leave a comment! Really appreciate it. Glad it helped out a bit. Cheers!
excellent production. concise with great step by step commentary. thanks.
Thank you for taking time to leave a comment! Really appreciate it and it makes my day! Glad it helped out a bit!
Thank you for posting. I was struggling with those blades for a good while. Now my wife can finnish trimming my hair.
Thank you for your comment! Really glad it worked out for you! Appreciate the comment and watching my video!
Bro I've been sitting here for 2 hours tryna to get this to work only to realize that my blade was upside-down... Great tutorial man thanks a bunch!
Thank you for taking time to leave a comment! Really appreciate it. Glad it helped! Cheers
just came here to appreciate your time. Helped me with my wahl 🎉 :)
You just saved me from having to buy some new clippers. Thank you so much
Thank you for leaving a comment! Really appreciate it. Glad it helped out a bit!
Thanks for the video! Turns out my clippers been out of tune for a while already, now I get a really clean cut.
Thank you for taking time to comment! Really appreciate it and glad it helped! Cheers
Thanks, that power adjust was just what solved my issue.
Thank you for watching! Appreciate the comment! Cheers!
Thank you very much for the video. My clippers were catching and dragging on my hair, obviously not cutting. I thought the blade was blunt, but it was out of alignment.
Thanks to your video, they're fine again.
🇦🇺
Thank you for the comment! Appreciate it! Cheers
Very helpful! I dropped my clippers and have never learned how to realign them! Thank you!
Thank you! Really appreciate you taking time to write and comment! Glad it helps out a bit! Cheers
My clippers weren't cutting. They were moving side to side but they weren't cutting. Aligning them like you said; right side of the blade on the fat part and the left side of the blade aligned with the 2nd thin triangle, and also pushing the blade "up" a bit closer to the edge fixed my problem. Thanks!
Thank you for your comment and watching my video! Really appreciate it. Cheers
To repeat the same thing that's the last person said thank you so much for taking the time to make this video I was beside myself as to how that went back together and I was on the verge of drilling the holes bigger until I seen your video thank you very much for taking the time to do this you have a great day and I hope you have a great year ahead of you God bless you
Thank you for your comment! Really appreciate you taking the time to comment! Glad you didn't drill your clippers! Lol. Happy cutting!
Thanks man, I thought I lost my clipper when my son dropped it and the top blade shifted from its position and looking at afterwards, pulled it off. God bless you for this video.
Thank you for thanking time to leave a comment! Really appreciate it! Cheers! Glad it helped out a bit
Thanks buddy. Followed the steps exactly, all 100% , clippers are working great again.
Thank you for watching! Appreciate the comment! Glad it helps!
Thanks for the video,Had my trimmer for years and recently its not been as good.Took off blades and was surprised at how much hair was caught inside.Taking it for a test run tonight.
Thanks for watching! Good luck!
Thank you so much! This is the first video I found that actually helped me. Now I can finally cut my dog’s hair again. He’s a Komondor...lots of hair :)
Thank you for watching my video! Really appreciate your comment! Glad it helped out! I had to google 'Komondor'.... dayum... you'll definitely need a WAHL to cut through all that fur! hahaha Good luck! Cheers
@@lmbpros *I haVe thaT saMe eXacT cLippeRs modeL.! WouLd you mind bRoTheR doinG a video tuToRiaL on hoW to fiX and repaiR thaT "whiTe thinGy" aT the (**0:01** & **0:30** sec.) maRK.?! Mine feLL oFF and I haVe no idea hoW to reaTTaCh iT...!!?!!!!?* 😢 😠 🙏
Thank you for sharing I thought my clippers broke but you help me maintain functionality thank you
Thank you for leaving a comment. Really appreciate it! Thanks for taking time to watch my video!
The screw on the side, that adjusts til you hear the loud noise. THANK YOU for pointing that out.
Thank you for taking time to leave a comment! Really appreciate it. Thanks for watching my video!
I’ve been a hairstylist for 20 years and have replaced many clipper blades but never knew to do any of this. Thank you!
Thank you so much for this comment! It's such an honour to read this comment. Thanks again for watching! Appreciate it greatly
New to barbering so been struggling with this for a while. Very well explained i managed to do it first try, thank you!!
Thank you for watching! Really appreciate the comment. Cheers!
Good luck with the barbering!
thank you so much! Instructions worked perfectly!
Thank you for taking time to leave a comment. Really appreciate it. Glad it helped out a bit. Cheers!
thanks, helped me a lot. After i sharpened the blade there was a problem, its fixed now and machine is working like a new one :)
Cool! Glad the video helped out in some way. Appreciate your comment! Thanks!
Videos like this may not get a lot of views but I’m sure glad you posted it. Thanks
Thank you for taking time to comment. Really appreciate it! Glad it helped out about. Cheers!
Super useful, saved me a bunch of money buying new ones
Thank you for the comment! Really appreciate it. Glad it helped out
Saved me! It sounded so bad before I watched this proper tutorial. Works for wahl color guard.
Thank you for leaving a comment and taking time to watch my video! Really appreciate it. Glad it helped out a bit! Cheers!
Going to try this. Had my wahl Clippers for years. Just cut my hair today and it was uncomfortable. Very sharp and I have cuts all behind my head bleeding and very sore right now 😅
I dropped my clippers and they started having this really annoying noise. Just found out that it had messed up with the power setting when I dropped it. Thanks for the video!
Thank you for your comment! Appreciate it! Glad it worked out.
Thank you a lot man. You saved my budget. It really worked
Thank you for the comment. Appreciate it. Thanks for watching and taking time to comment!
Thank you for this!! I thought mine was broken!! :)
Thank you for taking time to comment! Really appreciate it. Glad it helped a bit! Cheers!
Thank you for uploading this tutorial 🙏🏼
Thank you for your comment! Really appreciate it and thanks again for watching!
Thank you so much for this clear|, instructive video.
Invaluable.
Thank you! Thanks for taking time to leave a comment. Really appreciate it! Cheers
Wow! Funny how my clipper stopped working, didn't know what to do even though people said it shouldn't be blunt so quickly, seeing it's just a month old. I'm new to barbing. Will give this a try once I get back to work. Thank you so much.
Thank you for your comments and watching my video. Very appreciated. Hope it works out. Cheers
Thank you so much buddy!!! This really helped, and I didn't have to bring to my barber!
Thank you for taking time to leave a comment! Really appreciate it! Glad it helped out a bit! Cheers!
Thank you, an absolutely great video, very well explained and presented, I dropped my Wahl recently (oops!) and was not cutting and now thanks to you and this video, it is working perfectly again
Thanks again
Take care
Sam
Thank you so much for your comment! Absolutely made my day! Thanks for watching and glad it helped out!
@@lmbpros 🚨 *I haVe thaT saMe eXacT cLippeRs modeL.! WouLd you mind bRoTheR doinG a video tuToRiaL on hoW to fiX and repaiR thaT "whiTe thinGy" aT the (**0:30** sec.) maRK.?! Mine feLL oFF and I haVe no idea hoW to reaTTaCh iT...!!?!!!!?* 😢 😠 🙏
Great video just what I was looking for .
Cheers. Really appreciate the comment ☺️
Thanks for the vidéo. It is very helpful. I’m just wondering how to adjust my clipper to reduce vibration. My clipper has just an adjustment screw just next to the blades and I’m turning it trying to find the best adjustment but it keeps vibrating and my hand becomes numb. Do you have an advice to help me, please? Thanks in advance!
I cleaned my clippers but now my guards won't fit. The cutting blades touch the guards. Idk what to do
So helpful. I had no idea about the screw on the side either
Thank you for commenting and taking time to watch the video! I really appreciate it! Glad it helped out a bit! Cheers
Thanks a lot, clear, easy and effective!
Thank you!
Excellent video! Question, I've taken my wahl apart. The vibrating "arm" seems to be clacking against the shroud even with top cover off. If tilted, motor will even stop as it must be striking the lower shroud somewhere. Do you have any thoughts? I would hate to throw out $40 clippers for something mechanical. My clipper is exactly the same as the one on the left in screen at "0.07"- no spring. Thanks if you have the time to answer.
Thanks! My clippers are working perfectly again!
Thank you for the comment. Really appreciate you taking time to send a comment! Cheers! Glad it helped out a bit
Thank you and God Bless you. Steven.
Thank you for watchcing! Appreciate your comments and glad it helped! Bless you brother!
This guy's ruler is so cool
😂 Thank you
Very helpful and to the point.
Hi thank you for watching! Appreciate it and your comment heaps!
TYSM. I already fixed my clipper... It's not noisy anymore.
Cheers mate! Thank you for your comment. Really appreciate it.
I want to align like my Limural wireless was stock, I installed ceramic blades and I'm basically at a Zero gap. I want stock alignment so I can do a proper 0.5/1/2 fade.
U da goat for this one
Thanks man.. Your video help save me some money!!
Thank you so much for your comment. Really appreciate you taking time to watch my video. Glad it helped out!
Very helpful, thank you sir!
Thank you sir for taking time to comment. Really appreciate it. Cheers!
Thanks fixed it perfectly!!!
Thank you for taking time to watch my video and really appreciate the comment! Glad it helped!
Thank you very much. This video worked for me
Thank you very much for taking time to comment. Really grateful for it. Glad it helped out a bit. Cheers
Thank you!! Took mine apart to clean and couldn’t figure out how to get it back together 😂😂😂
Cheers! Thanks for the comment. Glad it helped out in someway!
Err, I think that slot in the brush handle might be for setting this gap 0:53, it looks like the exact same length as the blade
Extremely useful.. thanks bro
Thank you for the comment! Appreciate it. Thanks for watching!
Thumbs 👍 bro, am from Uganda and was abt to throw mine away then I found yr video and gues wat!,ma machine is,more shaper compared to even wen it was brand new thanks alot
Cheers bro! Thanks for watching the video. So happy to hear your clippers back to working order!
I need to know if I can replace the white plastic that’s attached to to the metal vibrator that cuts the hair?
th-cam.com/video/Wb1w46_7As4/w-d-xo.html
I made a video about this. You can replace the vibrating arm, but hopefully your official Wahl spare part website stocks the Particular model. Good luck
Im really strugglin with the black screw. I do everything same as you but at the end when its all done. Its loud, then i make it quiet same as ypu, but then the upper knives are too "right - >" positioned. Then when i cut hair i notice is not as good as it was before. Please help
Hi Thanks for watching! Not sure what else I can add to what I've already said in the video.
You'll just have to keep positioning the blades until it's just right using your sight/judgment.
You also probably know that when you tighten the screws back in place, the blades will move.
It's just a matter of keep doing it 'til you you get it in the right position.
Getting the screws in with just the right amount of tightness is another thing to consider
Sorry if Im not helpful. Hope you get it right.
Helped me too! Thanks bro
Thank you very much for your comment. Glad it helped! REally appreciate it!
Nice video. Very easy to understand and helped in aligning the razor. Thanks
Thank you for your comments and for watching my video. Really appreciate it!
Excellent, thank you!
Thank you very much! Really appreciate the comment and taking time to watch. Cheers!
Very helpful video!!
Thank you! Appreciate your comment! Cheers
My god I opened up my clippers and there was a habitat of hair trimmings living in it
I know what you mean! 🤣 If you don't have that tiny sponge bit that 'traps' the hair and 'prevents' hair getting inside the cavity of the clipper, you can buy them from your local Wahl supplier/website.
Thanks buddy 👌👌👌
Thank you for your comment! Appreciate it heaps! Thanks for watching!
Thank you very grateful.
Thank you for watching and taking time to comment. Really appreciate it. Cheers!
How come your bottom blade spring doesn’t pop up? On my clippers my bottom blade spring does, which makes zero gapping hard to do because I have to hold down the bottom blade while trying to align it with the top. How are you keeping the tension on your bottom blade?
Same question
great video sir. thank you so much. i think what there is a problem with my clipper. the white "arm" that it below the cutter blade is not straight because when i put upon it the cutter blade, it bends on one side. can i do anything about it?
Hi, thank you for the comment! Thanks for watching! From my what I know (Im no expert sorry), the white head that connects to the vibrating arm should never be bent. The only reason I can come up why it can be bent is that the unit has been dropped head first.
I highly not recommend messing with the internals of the clipper ( I have wrecked one of my WAHLs :( trying to mess around inside ) However, since yours is already bent to one side, you can attempt to straighten it out as the metal that the white piece is connected to is quite bendable. That soft metal should only bend upwards and downwards. If you're saying bends on one side, meaning left or right then something is definitely wrong.
Always bring back to your retailer if under warranty! dont open the case as it voids warranty! good luck. sorry cant help much. I tried google this topic but very few hits.
you can replace the vibrating arm though here is a link for an australian store
barberco.com.au/vibrator-arm/
Thank you for everything! I appreciate all your help!!
@@thodorispapageorgiou9977 thank you! All the best mate
Sorry im confused- so i bought a Wahl balder 3 or 4 years back but never used it because of the loud noise. I fished out again during lockdown. Do I need to a) adjust the blades as shown 2) change the black adjustment screw 3) both. If I make it quiet by adjusting the screw, will that affect the cut? Thanks!
Hi thank you for watching!
I'm no expert but for me personally, I always clean out my clippers after every cut so I have to align the blades after cleaning.
I don't always tune/power-up the black adjustment screw. If you turn it on and as I've shown (be careful not to cut yourself) by pinching the blades and your pinching stops the blades then tune/adjust/power-up by adjusting!
cheers
thanx's a lot. your video makes my WAHL useful again
So happy for your comment! I really appreciate it! Thank you for watching!
I have resolved the problem with your video,thanks
Thank you for your comment! Appreciate it muchly! Glad it helps and thanks for watching!
thank you, very helpful
Thank you for the comment! Really appreciate it and made my day! Glad it helped out a bit. Cheers
Left a like just because it was very helpful and you used a Pokémon ruler lol.
Cheers! Appreciate it! I do like that ruler lol
Very good and clear
Cheers mate! Thanks for watching
I did the same. But when I place the lever up ,then looks all crooked. Then lever down and make the blades together is all good. Goes crazy when its up
I never experienced this. I will move the lever up and down after each cut to see if this happens to mine. Cheers.
@@lmbpros i dont even have to see the cut, just by moving up, the blades are perfect, moving down and goes mental,
Thanks so much mate !
Thank you for the comment! Appreciate it heaps!
awesome video
Thank you for the comment! Really appreciate it!
When I took apart the blade there was these 2 pointy things sticking out
Thanks, GOD bless you.
Thank you for the comment! Really appreciate it. Thank you for watching!
Got it! Thank you so much!
Thank you for taking time to leave a comment! Really appreciate it. Cheers!
@@lmbpros How come your bottom blade spring doesn’t pop up? On my clippers my bottom blade spring does, which makes zero gapping hard to do because I have to hold down the bottom blade while trying to align it with the top. How are you keeping the tension on your bottom blade?
Good video 👍🏿