DTC P0171 Code 2017 Chevy Trax --- Diagnostics, Causes, Tests and Fix/Fixes!
ฝัง
- เผยแพร่เมื่อ 7 ก.ค. 2024
- In this video we look at a 2017 Trax P0171 Code Causes, Tests and Fix/fixes! This video may be applicable to other GM vehicles with the 1.4L (LUV) engine.
For a great explanation on the P0171 long term and short term fuel trim check out BigDogg50001 video here ----www.youtube.com/watch?v=SugtR...
Checkout my Amazon store---
“As an Amazon Associate I earn from qualifying purchases.”
www.amazon.com/shop/thedisgru...
Want an official Disgruntled Mechanic sticker? just send your mailing address to the email below:
thedisgruntledmechanic@gmail.com
Wanna send me a sticker or other swag? Just send it to the address below.
*****************************************************************
Mailing Address:
The Disgruntled Mechanic
P.O. Box 12
5 E Roosevelt Ave
Elysburg, PA 17824
*****************************************************************
Disclaimer:
BE ADVISED: Any public comment left on THE DISGRUNTLED MECHANIC CHANNEL may get a video response from me rather than a written response. IF YOU ARE NOT COMFORTABLE WITH THIS DO NOT COMMENT!
I am not responsible for any damage anyone does to equipment or themselves from the information contained in the video. If you follow the video and you do stupid shit to you, your equipment, or others it is your fault not the Disgruntled Mechanics! This information is given with the understanding that if you use this information you do so with no liability to the Disgruntled Mechanic or this channel. These videos are for entertainment purposes only! Due to factors beyond the control of the Disgruntled Mechanic, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. the Disgruntled Mechanic assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. the Disgruntled Mechanic recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of the Disgruntled Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not the Disgruntled Mechanic. - ยานยนต์และพาหนะ
Checkout my Amazon store---
“As an Amazon Associate I earn from qualifying purchases.”
www.amazon.com/shop/thedisgruntledmechanic
Nice job explaining the process Mike. As you already know, having more than one issue can be a frustrating task to trouble shoot. Helga will be pleased with your work buddy.
Thanks Wyatt and Helga is happy that I keep it running.
Great work Mike in demonstrating a step-by-step process in tracking down the fault. Who would ever thought that you had multiple issues creating that code 😊 Have a good one Mike and be safe!
For reason it is never just a simple fix for me! Thanks Terry!
@@TheDisgruntledMechanic I haven't Commented yet but you're welcome.
Very good explanation on the valve cover diaphragm and pvc intake check valve
thank you!
Awesome. Thank you for doing a thorough explanation and run through all the possible causes. Its the most useful video I have come across on this error for the Trax.
You're very welcome!
@@TheDisgruntledMechanic this actually helped fixed my P1101 error
AWESOME!
Best video. You have done such a grt job explaining that I feel like I know so much about cars. Now I'll brag to my friends about it. Thanks a million.
thank you for watching!!!
Those Easy Intakes are awesome, nice fix Mike!
They sure are. Thanks.
This is awesome!! thank you so much for the help. You are a life saver, well at least saving me some money!
Nice detail video. Wow 2 problems causing one code. I like it when the purge valve removed itself and was ready for the new one. I wish the parts would remove themselves from my vehicles when putting in new parts.
the magic of youtube!
Good video. Thanks for the troubleshooting efforts.
No problem 👍
Nice trip down the diagnostic road Mike. Yes your correct 60K or 5 years . Nice one Mike 👍
Thank you Steve!
Tanks Ford the video, grate explication
thank you for doing what you do
you are welcome!
Hey Mike, great job! Which was the reading of the maf sensor before and after fixing it? Would have been nice to realise how the low maf reading shortens timing injection and generates that wrong fuel trim. Does foxwell provide that live data? Thanks!!
Does the failure of the purge valve always affect the fuel trims? If so, do you need a special scan tool to reset them, and how do you find out what the fuel trims are for a specific vehicle?
Can you check for vacuum leak without removing the electrical connection of the purge valve?
Is that the only way? Will it throw off the computer?
Thank you
Thank you for the help .👍
glad it helped!
great work, I am looking at getting a chevy trax, and the cel is on in that vehicle, dont know what code it is yet, but at least now I know what to look for if it is a p0171. Love the outro, I myself am a mechanic, did 3 years college for automotive, been wrenching for about 27 years, and completely relate to broken bolts, also my name is Mike as well, lol
Thanks! It is appreciated!
Tengo un trax 2016 con el mismo problema y se arreglo cambiando la purge valve gracias
That's an eye opening case story, with two problems. I would have thought it would have thrown an evap code with a constantly open purge valve, but evidently not.
Nope no evap code. maybe because it was only slighty open and proceeded to get worse. Thanks for watching! It makes me wonder if I had taken it back to the dealership if they would have just fixed 1 problem under warranty and shipped it.
Good work, but better to throw an air rachet, it will do more damage when the head breaks off. Wrenches are hard to damage.Good video.
Thanks man 👍
Ur welcome! Hope it helps!
Do all these trax have a ticking to them
Dude Thank you so much. I have never worked on anything over a 2000 and My mother's 2015 Trax LT has been giving her this code. I just found the PVC Valve you pointed out is sucking more air than I have ever heard before. This blasted car is like a total Alien Anatomy to me, you helped a ton.
Thanks Terry! (Since you did comment now!)
@@TheDisgruntledMechanic Yea I guess I did. Unfortunately, that little bit in the Intake is missing too, so Looks like a new valve cover and Intake Manifold for this thing. IS it me or is the design really kind of stupid? But it still beats the heck out of her previous chevy Cobalt's rear drum brake design. That large W-shaped spring was a total nightmare to get into place. The sad thing though is when she took it to Autozone to get the code read they were trying to sell her Fuel Injectors.
Yes a very piss poor design and common failure on these engines.
@@TheDisgruntledMechanic That's putting it mildly.
I have a 2020 Trax with 64K on it. The last two months I have put in a new o2 sensor and just this weekend had to replace the MAF sensor. Today my check engine light is back on for some unknown reason and i can't find my code reader. How many more sensors could be going bad that are causing these problems?
All fixed ty
My pleasure!
Tanks
My pleasure!
Hello Mike my psi on my A/C is 95 what should I do?
Hello great vid I was wondering how you like that foxwell i70 and how does it cost to update
I like it but I would buy a launch if I were buying new (link below). It came with 2 years free updates when I bought it. I think updates after that are like $600. amzn.to/3dCr97V
hey mike! you would think it would be that vc pcv.... i would think you had a evap code for constant purge, i dont know... i never fixed a maf by cleaning but you did!
Well all I can tell you the cleaning worked but still installed a new MAF sensor!
yes! and the oem is the way to go the aftermarkets under or over report
So cool, what was that part and part number of the one you replaced with a vacuum?
I believe it's called a purge valve
Hey Mike how is it going in today’s crazy world? Good video thanks for sharing. Finally received my set of 3/8 stubby sockets and ratcheting wrench I ordered awhile back. Amazon and the postal service screwed the whole order up. The 1/2 socket set arrived no problem but the rest of the order was destroyed in shipping. Hope all is well and stay safe. How is that Foxwell scanner? Was thinking of getting one with the Honda software installed in it. Thanks buddy 😊🇺🇸
Well glad you got the tools, finally! I really like the Foxwell. I use it the most of any of scan tools right now. Stay safe Artie!
How do you like that scanner , I purchased it recently waiting on it.. hopefully its as good as my autel ms906ts
I like it. Most of the time it is my go to scanner.
My purge valve has a slight vacuum
What a great job, best I've after viewed, I'm heading out to the barn to work on my daughters 2015 Traxs with much more confidence. PS whats your home address and is the house next door to ya for sale "neighbor" 😁 Yooper Jim
TY! Sorry don't give address out but if neighbors sells I'll let you know!
When should the purge valve open?
Explains better than I could---- www.samarins.com/glossary/purge-valve.html
Where are u located
Hey Mike, enjoy the content. Just wondering, how did you convince Eric O to come help you that time?
I was having problems and he offered to come help me. My girlfriends family has known him and used him as a mechanic in his pre youtube days. So we have hung out many times.
@@TheDisgruntledMechanic Thats good to hear. You and Eric, Ivan and others have helped me alot, appreciate you, take care
Thanks!
Hey Mike how you doing ? Was checking out one of your other video's , buick century odometer or PRNDL problem . Noticed you had on a Reading royals sweat shirt . You from Reading ?
Nope I live near Elysburg pa. Just used to go see the Royals years ago.
@@TheDisgruntledMechanic I live in reading . I also have gone to see the royals way back when , cheaper then going to philly to see the flyers . You near knobles theme park ?
Yes live about 2 miles away. Their Christmas light show was great!
@@TheDisgruntledMechanic Never saw the Christmas light show , have gone there in the summer . Love the wooden roller coasters there .
How is it possible a part breaks on a 3-4 year old car? GM quality?
Bad engineering for sure!
Which foxwell model is this brother ?
i70pro
Opel engine... Well, now Opels have PSA engines... What might the little Chevys get then?
My mechanic is never able to fix P0171 and P0172 problem. I checked obd2 myself. It is showing Short Term Fuel Trim Bank1 value -30%(I am curious why its negative).
MAP at idle is showing 32 kPa.
O2S2 B1 showing almost constant voltage (0.7v). OS2B1 shows fuel trim 0%.
What could he possible problem with my car?
I have found that if that PCV valve is intact on the valve cover then the Intake Plenum will usually be okay too. However, if the car is NOT being maintained with regular oil changes and levels maintained (less n less people seem to know the importance of why & how to do this!) Then this will valve blows... And goes down the line... And if it's as Turbo add the the hoses... Not too mention they probably drive it like first off the Line and I find the Ladies to want to be driving faster n hence engine in worse condition too - this is not scientific! Just by chance with this platform and code... 171 is always unwanted air messing with air/fuel ratio. Was actually surprised this was a MAF sensor when the code was p0171. I never ever solved a code P0171 by replacing or cleaning a MAF. They are read by the PCM and tested on their own... If you saw a whiff of smoke on your air tube and tightened it down... I would personally would have give more effort and time to allow the electronics reset and recalibrate at that point before venturing onward...in fact after cleaning the MAF and re-sealing it in place that could have also stopped unwanted air from entering... I was NOT THERE JUST BEING AN ARM CHAIR QUARTER-BACK ON A SUNDAY 9 MONTHS AFTER THE FACT! I hate to replace parts unless it is absolutely necessary and I am Root Cause of the Problem kinda of Guy! So I think this one is like a NTF/Problem Cleared While Testing. You cleared it...it was an air leak.
change your air filter every 6 months or sooner if required... then mass flow sensor willn't get dirty. failure to do proper Maintenace was the cause
Need help I have a chevy trax
just got this code on my 2015 chevy trash. This car has been a nightmare around 100k miles. This is junk, and I going to trade it in for a Toyota, and this engine light popped up with that code.
Yep had these codes on the 2015 Trax to fix and since a water pump. radiator and heater control. Good luck.
@@TheDisgruntledMechanic already fixed the water pump early this year. radiator too, it cracked a few years ago. Oh I have a long list of issues with this car.
Honestly if you lived close to me I would interested in buying it. I would like an older 1 that needs work to make videos on.
@@TheDisgruntledMechanic in the Seattle area. It will be traded in 2 weeks for 6k. a cross country drive will kill the engine haha. i got most of the issues fixed. Something new (issues) always pop up with it.
Yes I am pretty far away from you in Pennsylvania. Good luck!
I watched another video a couple days ago with same problem don't remember who it was. It turned out, the pcv was bad, and the valve cover had to be replaced because of it being built into it.
Are you flipping cars now? LOL
No flipping. Yeah I lucked out I really didn't want to have to replace the cover but probably will have to in the near future with the failure rate of the PCV!
Like🥰
I don't want my vehicle anywhere near a stealership.
Asalamualaikum
😂😂😂😂
For a great explanation on the long term and short term fuel trim check out BigDogg50001 video here ----th-cam.com/video/SugtR4KMIDU/w-d-xo.html
Wow, thanks for the shout out Mike!