I think this could be used for security also. Especially in malls, or other public establishments, you won't need cameras to know if someone is in the mall after hours, or to catch someone who's running. Just record their average energy production from their weight and speed to track a criminal. Or, you could also record which area produces the most energy, and use that information to keep the most busy stores spread evenly throughout the mall in order to make processes more efficient, and to avoid massive crowds in one area, while on the other side of the mall it's almost vacant. I like your ideas of energy production, as it has many other possibilities too.
Thank you so much! I’ve been searching about every single thing that’s been shown in the video since the past 5 days. Now that I’ve finally got it, I’m more than satisfied. Good work.👍🏻👍🏻
thank you so much! it's really helpful for my research on this subject. May God bless you! keep it up, I hope we can share our thought and make a great conclusion.
Hi Tushar, thanks for sharing this research. Can you please provide a link to the research paper? I want to use the findings in my paper. So, I would need it for reference and citations.
Hey Tushar, I loved your project and I saw the video because I am doing something similar for my project which I am presenting in a science conference. We tried making our version of the circuit but its output is extremely low. So, I was wondering if you could help me in my project by sharing your work and design for the circuit and how did you make the entire working system. Thanks a lot
Is this really possible? connecting them in series and parallel? piezo is a transducer, if you connect it in serie the material in the piezo is deformed by the voltage of the other ones. please help me understand.
I just wanted to know why do we need to convert AC into DC because most of the home appliances need AC or if it because of its low quantity(current) , if so when produced in higher quantity would there be no need of rectification?
It depends on what you want to do with he energy! If you want more voltage, then connect in parallel OR if you want more current(amps), then connect in series! Mixing might be the best because if its for charging your phone then connect the plates in parallel till you get 5V and then the rest if series for more current!( more current can give you a faster charge!) Hope this helped! Cheers!!
Hey Tushar. This is a Great Presentation ! I have a question : What is the durability of the sensors, say when it is subject to a very heavy load falling on the piezoelectric device.... Can the device break ?
helloo love ur project. may we ask what are the details of the capacitors, diodes, and resistors we need to use if we used five 35mm piezo discs with Specifications: Thickness: 3.36mm Resonant Frequency: 10+/-0.5KHZ Resonant Impedance: 100R MAX The Static Capacitance: 8000pf plus or minus 30% Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Operating Temperature: -20~70 Storage Temperature: -30-80 pls reply asap thank youuu. we need it for a school project
Awsome your work, congratulations for the idea and the project!!! I have the same theme in my scientific work, it will serve as an inspiration, it helped to expand my ideas.
Tushar Jain, really a beautiful presentation. But I do find your values a bit more optimistic for what a piezoelectric element produces, we are itself into manufacturing of (PZT) PIezoelectric material/components in Pune (Sparkler Ceramics pvt ltd). Is it just theoretical calculations or did you actually get it practically ? Just want to know.
Please, I did this practical experiment. My AC voltage was varying , sometimes, 10V sometimes 2 V. That's not my problem, the problem I'm facing is, the rectifier circuit absorbs all my ac voltage and delivers value of around 0.5V as the DC output, please, what should I do?
sir thankyou so much.. your video really help my projects.. if there is any links for your research ...plz send me.. so I can include your researchpaper also in my report.. once again thankyou so much sir
When we press piezo sensor then it produce energy in one direction then when it return back to its previous state then it produce energy in another direction thus we get alternating output (AC)
Can you please tell me how can I charge 9 volt battery using piezoelectric and how many piezoelectric element required to charge 9 volt battery and T the same time I also want to use 1w led bulb through battery
Hello Tushar! First of all, Really innovative idea! I have a doubt though. Have you used PZT crystals for this project? Would there be a considerable difference if I used PVDF crystals, which are fairly more efficient and has less acoustic impedance? Thank you.
I've tried make a piezoelectric source using piezotransducer and make them pararelled of 6 piezo but the problem is the power outpuf is very low (almost mW instead of W) because they've been usually used as sensors not as generator Sorry for my bad english >
Iya belinya dimana ya, aku juga cari selalu yg keluarnya kecil. Kata laboran di kampusku sih katanya harus pakai piezogenerator. Yg banyak beredar di Indonesia itu piezoelektrik yg sensor, susah cari kalau yg piezogenerator
hello, I am doing a similar project and I would like to talk with someone who has worked on this before. So if anyone of you can help me I would be so grateful.
i wanna start a company that sells piezoelectric components introduced in every working material which has weight like shoes,vehicle tyres ,any thing which applies pressures ...
The technology in our world is ridiculously incredible! Keep up that great work people!!!!!!!!! I LOVE SCIENCE!!!!!!!!!!!!
I think this could be used for security also. Especially in malls, or other public establishments, you won't need cameras to know if someone is in the mall after hours, or to catch someone who's running. Just record their average energy production from their weight and speed to track a criminal. Or, you could also record which area produces the most energy, and use that information to keep the most busy stores spread evenly throughout the mall in order to make processes more efficient, and to avoid massive crowds in one area, while on the other side of the mall it's almost vacant. I like your ideas of energy production, as it has many other possibilities too.
Thank you so much! I’ve been searching about every single thing that’s been shown in the video since the past 5 days. Now that I’ve finally got it, I’m more than satisfied. Good work.👍🏻👍🏻
Thank you so much. We are doing a project on piezoelectricity. This video helped a lot. This deserves more views and likes....
Bro , I did this project but I find many new analysis in your research, thanks a lot
How did your project go ? i am looking to do a similar project as well can you help ?
@@joellumbala5684 Yea i want to know the same thing!
thank you so much! it's really helpful for my research on this subject. May God bless you! keep it up, I hope we can share our thought and make a great conclusion.
Thank you Tushar , your initiative of research in this field is supporting me for making my project on self sustainable system.
Power to the people!
Which battery we should use for this project?
This video and the content, the way you presented and the facts.
Man you covered everything.
Damn Man.
Super sir very good and clear matter
Hi Tushar, thanks for sharing this research. Can you please provide a link to the research paper? I want to use the findings in my paper. So, I would need it for reference and citations.
Can you please clarify more about the series parallel circuit of piezoelectric sensor
man youve nailed it !!!!!!!!!!!!!! i didnt expect you putting your battery ahead of the rectifier ckt..
Eduard valenzuela ..
What a stupid mistake...😎😎
It's really very nice and innovative!
How come connecting piezo in series works?
How do you get the 40V for 75kg? What is the formula?
Hey Tushar, I loved your project and I saw the video because I am doing something similar for my project which I am presenting in a science conference. We tried making our version of the circuit but its output is extremely low. So, I was wondering if you could help me in my project by sharing your work and design for the circuit and how did you make the entire working system. Thanks a lot
Hey man, how much are you outputting?
nice video tushar i can choose this one has my final year project thanku
Which diodes did u use for this? Of what specifications?
Is this really possible? connecting them in series and parallel? piezo is a transducer, if you connect it in serie the material in the piezo is deformed by the voltage of the other ones. please help me understand.
Hi, I have a dought
Doesn't water spoil piezoelectric devices?
will you please explain how I can simulate this one before doing hardware
I just wanted to know why do we need to convert AC into DC because most of the home appliances need AC or if it because of its low quantity(current) , if so when produced in higher quantity would there be no need of rectification?
Reality is voltage is not greater then 5v we have prepared and presented the video to kpit
i have done this project during my school science exhibition and currently working on making of its comparatively large scale model.
can you please explain why is it producing ac while we run or walk??(other than the multimeter reason)
Hey man good work....well done.!
I Can't understand your series parallel connection of 8 piezo sensor.....plz give the another circuit diagram of this project.....thank you advanced.
Will the current produced will be alternate
Connect in parallel or series or mix which one is better ?and why? Thx
It depends on what you want to do with he energy!
If you want more voltage, then connect in parallel OR
if you want more current(amps), then connect in series!
Mixing might be the best because if its for charging your phone then connect the plates in parallel till you get 5V and then the rest if series for more current!( more current can give you a faster charge!)
Hope this helped!
Cheers!!
Hey Tushar. This is a Great Presentation !
I have a question : What is the durability of the sensors, say when it is subject to a very heavy load falling on the piezoelectric device.... Can the device break ?
helloo love ur project. may we ask what are the details of the capacitors, diodes, and resistors we need to use if we used five 35mm piezo discs with
Specifications:
Thickness: 3.36mm
Resonant Frequency: 10+/-0.5KHZ
Resonant Impedance: 100R MAX
The Static Capacitance: 8000pf plus or minus 30%
Sound pressure level: 85DB 10cm
The input voltage: 30vp-p max
Operating Temperature: -20~70
Storage Temperature: -30-80
pls reply asap thank youuu. we need it for a school project
Hey can u say about the Force that u applied for getting this much of I V graph????
Tushar, Can you show us the practical model of this device of yours...??
I'll be happy to do so, please share your contact details !
Tushar Jain vivekmukundan1706@gmail.com
Hi Tushar, can you send me too,
alikara1207@gmail.com
+Tushar plss send me too, andremuslim@gmail.com
please send me too, arjan99.klinkenberg@gmail.com
Awsome your work, congratulations for the idea and the project!!! I have the same theme in my scientific work, it will serve as an inspiration, it helped to expand my ideas.
Tushar, Kudos. Wanted to know more about this? We are also researching on the same domain. Can we see your device?
Tushar, could you please email me how you connected the piezo transducer in series-parallel connection? Thank you in advance.
it's amazing! I take my hat off!
bro can you please tell me how many transducers you have used in your project
Tushar Jain, really a beautiful presentation. But I do find your values a bit more optimistic for what a piezoelectric element produces, we are itself into manufacturing of (PZT) PIezoelectric material/components in Pune (Sparkler Ceramics pvt ltd). Is it just theoretical calculations or did you actually get it practically ? Just want to know.
can u suggest some efficient piezoelectric cells or material i can use in my project? m also from pune
Is your battery get truly charge??
Hey, tushar, great work in making this video. I was looking for the same as i am also working on similar to this, this video was really helpful.
Please, I did this practical experiment. My AC voltage was varying , sometimes, 10V sometimes 2 V. That's not my problem, the problem I'm facing is, the rectifier circuit absorbs all my ac voltage and delivers value of around 0.5V as the DC output, please, what should I do?
Exactly .....iff full bridge is used it will reduce output power by 1.4 v approx.
@@aashishtiwari7053 use voltage multilipier circuit
Bro I have some doubts how can I contact u
amazing work :)
blood cells reference please i need it for my project
sir thankyou so much.. your video really help my projects.. if there is any links for your research ...plz send me.. so I can include your researchpaper also in my report.. once again thankyou so much sir
Tushar, How are you? I'm doing a Power Shoe prototype. So, I have to ask, what kind of connection do you recommend? parallel or serie. Thanks
can anyone explain why is it producing ac while running or walking??
When we press piezo sensor then it produce energy in one direction then when it return back to its previous state then it produce energy in another direction thus we get alternating output (AC)
Hi Tushar, can u tell me have u connected in parallel or series
hello, that is an amazing presentation. could you please share need presentation?
base on your circuit diagram how can you convert AC to Dc if your source is bat?
It's actually a mistake he should have placed rectifier before battery
Why choose weights from 40 to 75
Have you tried as little as 20 kilograms of weight?
Reason is human weight but yes it does produce that much
Can you please tell me how can I charge 9 volt battery using piezoelectric and how many piezoelectric element required to charge 9 volt battery and T the same time I also want to use 1w led bulb through battery
Hello Tushar! First of all, Really innovative idea! I have a doubt though. Have you used PZT crystals for this project? Would there be a considerable difference if I used PVDF crystals, which are fairly more efficient and has less acoustic impedance? Thank you.
tushar plz can u show us practical model of this device of yours ???
How can battery rectifier connect before battery because battery store dc and rectifier connect ac into DC
same question
Bro circuit mistake he wanted to place battery after rectifier
bro really awesome
have you completed a prototype of it
366 steps for 1 watt? isnt there a system that gets 7 watts per step? Pavegen? why is it different?
Thank you for uploading the video it was very helpful.can you please provide me the contents used so i can include them in my school project
excellent info
is that m=2 or m=3?
I've tried make a piezoelectric source using piezotransducer and make them pararelled of 6 piezo but the problem is the power outpuf is very low (almost mW instead of W) because they've been usually used as sensors not as generator
Sorry for my bad english >
Indonesia gan ?
Iya gan
Iya belinya dimana ya, aku juga cari selalu yg keluarnya kecil. Kata laboran di kampusku sih katanya harus pakai piezogenerator. Yg banyak beredar di Indonesia itu piezoelektrik yg sensor, susah cari kalau yg piezogenerator
Does this project is made already
Plz tell me
@@nayemislam3423 okkk but now I'm doing this project
Bhai calculation kaise kiya please samjau
Hi Tushar... can u send me the practical model tooo pls????
hey tushar, i think your research would greatly benefit mine too, if it would be fine, could you send me the practical model too?
Can you send me your project report sir please I am studying in this topic
Greetings sir, Im also studying this topic, do you already know the estimated cost of producing 1 piezoelectric tile???
hello, I am doing a similar project and I would like to talk with someone who has worked on this before. So if anyone of you can help me I would be so grateful.
I think you have a mistake in the results Power Produced in kWh and Energy in W.
You should also take into account the cost of producing your tile in the analysis.
And great work by the way :)
i wanna start a company that sells piezoelectric components introduced in every working material which has weight like shoes,vehicle tyres ,any thing which applies pressures ...
sure gautam brother... the tech.gy should be implemented to save our nature/......
PL send me the practical model
lies. where's this device?
well, now i kinda like the idea and the video, but would still like to have seen a working model.
o0o0o0o entrepreneurship daddy
buzzer plate use buzzer for it
Kimdly tell me.ur email...need to talk abt this project
hi that.s simple I have it