Everything about a Hemi is just beautiful. Amazing. And I have to say it’s reassuring to see a total expert struggle a little with the Chrysler main seal bridge side seals. I’ve done it on a stock 440 in my garage, in the car, without a lift. Loads of fun and I practically didn’t sleep the night before I was going to do it. But 28 years later, she still holds oil! That was back with the old felt-like side seals.
they are pretty but also even OEM used parts are 2k and up aka $$$ super expensive, not sure 🤔why vs 440-platform $$ as it's cousin but compared with a big block Chevy'$ wow mopar has a tax on the top-end parts to bad most are covered up ( clear or glass isn't common but cool to see in side 👍 ) in the engine bay but at least K-valve cover's castings magnesium/crome per-1975 look nice 👍so sexy
Many years ago when I was building my first stroker engine and ran into clearance issues. So naturally I went and started reading every engine building book I owned looking for guidance on how much and how to do it (because what else do you do when you are in your early 20’s and it’s late at night while assembling an engine that is supposed to bolt together). That weekend I went racing with a buddy of mine who ran Super Comp at a NHRA Divisional Event. One of the guys he raced with in Super Comp with was good friends with Tom Martino who happened to stop by his trailer and Ken told Tom I had a question about engine clearance issues. Tom kindly listened to questions and asked me about my engine combination and told my camshaft was wrong and besides giving me lots of advice he also gave me new-used cam and set of lifters (that honestly looked brand new) that he said would work for my application much better. As for the along advice he gave me about clearance for the block and rods or heads for pushrods it was the exact same as what Steve just said if you have clearance you have clearance and you only need a gnats @ss more because if the connecting rod or pushrods flexes, grows or bows while the engine is running you got bigger fish to fry than your connecting rods or pushrods.
Its amazing to see what modern CAD and CNC has done to an engine that was designed 60 years ago. The thing is am absolute piece of art to look at. Amazing !.
Your SMX and SML as well as the Noonan stuff is just amazing high horsepower artwork! Really enjoy all of the information you put out in the videos Steve!
I'm pretty sure they don't do that because of heads getting decked. That work would throw that sealing surface off. Ores better to use right stuff instead
Love watching you go through the process of BUILDING a motor from scratch. I build vintage race engines, mostly old European V12s, and the dummy build, dismantle, machine, refit, test, final assemble, dyno ect process is the same. Attention to detail, and proper seat of the pants engineering. Would love to come work in your shop. Keep up the good work, all that billet is AWESOME .
The engineering and attention to detail that went into that engine is amazing. No stones left unturned. I found the timing gear on the crankshaft to be quite unique. I'd like to see more of that in a later video. Thanks for a look into a most impressive engine.
Im in the UK, I m a regular mechanic, ive pulled the heads on one hemi (srt 300c) never even put a spanner to an LS engine. ive built and tuned an insane amount of 4v/cylinder engines. I always heard people refer to big bore v8 valves as dinner plates on sticks, but obviously never seen it in context. thank you for the videos.
This got my inner mopar breathing heavily. And I will forever love the look and complexity of the hemi valvetrain no matter how unreliable. Those heads are works of art, if Picasso built an engine it would be a hemi forsure
You can have a nice over head cam V8. Top Fuel guys proved that back in the day with the 427 SOHC cammer. They found the chain to be the weak link and set up a gear drive for them. It works great and the engines sound great with it.
How far things have come in 50 years and the precision these engines are, Plus they are a thing of Beauty as well as making Huge amounts of Horsepower ,Just awesome Steve
i love the art of an engine and how therapeutic building one is. the muscle memory of knowing your tools, the feel of your mics, and the smell of a machine shop. the smile and giggles u get hearing it for the first time. i built bug engines to Dodges and they all made me feel 16 again hear my first engine build. thank for your time sir, making videos is time consuming. again thank u.
I think it says a LOT about the confidence Steve has in his own products and the enthusiasm that he has in general for the art of engine building that he's happy to make an hour long video showing him assembling somebody else's arguably competing product. And really not bad talking anything about it. Though I'm only halfway through :D :D :D
the oiling system to the top- end to the rockers of that hemi is not to far off of the old 390 427 ford fe engines and wanted to say your content and skills are awesome and just watched the video of how you got your start and that was great and i agree need more old school machine shops that are becoming few and far between now but hats off to you great stuff!!!
They are and more dependable that's why otger shops use their stuff XRE uses Noonan and that's what Daddy Dave has in his new car and crybaby Justin just bought an XRE.
Not to mention it shows your in real life it's not staged ect I love the real side hearing banging in the back is music to my ears personally and it tells me people are working which is sorely lacking in this day and age.
@@devinej8411 you sir couldn't be more correct. This country is goin to hell n a hand basket.... no one wants to work anymore just sit on couch and collect checks from gov't . Sad indeed
For a second there I thought you were going to have to tear it down again, it's always damage during shipping or lost packages that delays builds it seems like, anyways that is one good looking engine, watching you systematically build engines is super cool, amazing work
It's just wild to me how you can see so clearly through the valve port in the heads to their respective manifold ports. It almost makes it look like a straight tube it's so open
Don’t know if you planned it or not but it was cool seeing the head bolt pattern on your block in the background compared to the noonan block!!! You can see the round bolt pattern over the offset pattern of the noonan! It makes sense your block has a much better seal!!!
Manton kicks ass and make AMAZING stuff..! On earlier promod, Top Alcohol, etc. etc. teams I worked on years ago, once going to Manton, it was just night and day, things just worked right and stayed nice! Granted, there was plenty of questionable value geometry on various teams I've worked on, haha, but I digress
Those main studs with the built in locators for the Caps are genius. You would think that you would see them used more for blocks who's mains that aren't pinned.
Really enjoyed the tutorial on different cylinder head types. There was a company about 10 or so years ago called Coates that created something they called the Coates Spherical Rotary Valve system. It was supposedly near zero-drag with no valves. I'd have loved to see how that would have worked on a billet Hemi engine like this with almost no theoretical redline.
My lord....what a beautifully engineered work of art. Seems like a shame to hide it under a car hood. I'd almost rather have it at the foot of my bed so I could stair at it every night in bed until I fall asleep...lol
The valves Konnigsegg freevalve system uses solenoids and oil presser to open the vales with out a cam. They don't even use a throttle body. Great video Steve.
It appears you were handed a bunch of parts, and the customer trusted you to get them all in properly. Given the expense of the engine, that's a huge amount of trust.
Love learning about this I’m in the process of turning my S10 into a drag and drive vehicle now got old school sbc about 650 NA but fixing to go bigger one day I’ll have an SMX
For me, this is the epitome of state-of-the-ART; with an emphasis on art, as I think both the machinery and skills in putting it together are simply something amazing to behold. Imagine was Michelangelo, or DaVinci would say!!!!
Anyone who has knowledge of what you do, understands you are in a “working shop” and noises goes along with it. I am still a working CNC Machinist for 42 yrs. I do not apologies for the noise, but do say sorry if you cannot hear me. I do now have those ‘kitty mics’ to filter out wind and some noise. Excellent vids!.
Man I appreciate what you do Steve! I’m from the sprint car world, so not much relates to my world. Lol, buy I finally know why we HAVE to have titanium valves! We constantly trying to break the tire loose, but with drive! All about them RPM’s brother!
The high-dollar engines that are bringing built nowadays are nothing more than a work of art. In 1991 I was twenty years old and i had a 540 cub inch engine built with aluminum block and heads. At the time I thought it couldn't get any better than that. Lol lol OK if you say so
Well, that hour just FLEW by. Steve, you are the most entertaining engine builder on the internet. BY FAR!!! Thanks for all the enthusiasm and smiles as you put these masterpieces together. So much fun to watch. 😃😃😃
Excellent episode a man of many skills finding out what doesn't work then makes improvement's. Thank you team Steve for posting all the great videos on your TH-cam channel .
Hey Steve, remember to turn the Lav mic on and off between takes so the battery doesn't die on ya. Noticed that the Lav mic died, and the camera mic quality kicked in at about the half way point. Us old deaf guys have a hard time understanding it... too many years of listening to loud motors! : D Great video... thanks for taking us along!
Takes experience to put a Hemi together the best *as it is possible.* (Thanks for your details). I’ve seen one TH-cam contributor who has damaged a few of these engines running down the tracks. (At least one smoked engine by not having any rev. limitation control setup). Another damaged Hemi by running out of fuel, (fuel pump under-sized). On and on it goes - But they are impressive when they stay running for a few strip passes.
A solenoid is exactly what they use with free valve technology. You should check out the Koenigsegg free valve system. Pneumatic valves still run conventional camshafts, but the springs are replaced with compressed nitrogen. It's a very simple explanation I am giving lol.
My dad was a mechanic and amateur racecar builder when I was a kid. He used to say engines are giant air pumps. if you want to make more horse power you need to flow more air.
FreeValve is both pneumatic and hydraulic, so you were correct. It's super expensive, and has to be controlled by the ECU, and an off the shelf ECU wouldn't have the capability to handle the valve timing and lift. You would need an ECU from them that has that capability, which I'm sure would be very expensive. You program the "cam" essentially. The really nice thing about that is you can essentially change the virtual cam to be anything you want without touching the engine at all.
That's one heck of a pile of cabbage and we caught our buddy Dewey snoozing in the comfy spot. LOL If possible, can you cover in a future video the reason(s) why one would choose a Hemi as opposed to the SMX style of design? Seems like as you noted in the video that the cars cannot utilize the horsepower effectively so it's puzzling. Thank you for taking time out of the workday to share the plethora of information, even if a vast majority of us are either out of the tire turning game or simply cannot afford to build a car to run in the 6's.
Goin back rewatching some older videos and shouldve left this comment on the killa b video but its jist very cool the way you can just make things happen. You guys make it work, make it fit make it fast. And thats awesome.
I learned to build engines as a kid - before TH-cam - and built many daily driver and race motors over the years. I’ve always wondered if there was a professional way to do things. Then I watch your video and see a “professional “ use the same techniques I always have. For some reason that makes me feel legit lol
with the amount of time your dog spends observing the work in the shop I bet he knows more about precision engine assembly than most people.
Knows more then me for sure. Damn a dog is smarter then me
The name of the shop has been changed to Dewey Morris Engine's!!
He runs the shop, Steve is in training and just the pretty face for the camera 😂
Chewey Dewey like the Chevy 😂
Thought the hemi platform was not good for street use idling around low Rpms bad on valve train
Thanks for the videos, I'm an old mechanic and enjoy seeing you squeeze the snot out of a chunk of aluminum, ,,,, keep them coming I Love it!
Everything about a Hemi is just beautiful. Amazing. And I have to say it’s reassuring to see a total expert struggle a little with the Chrysler main seal bridge side seals. I’ve done it on a stock 440 in my garage, in the car, without a lift. Loads of fun and I practically didn’t sleep the night before I was going to do it. But 28 years later, she still holds oil! That was back with the old felt-like side seals.
Hemi valve trains are beautiful. They look like something that would be in the Terminator.
they are pretty but also even OEM used parts are 2k and up aka $$$ super expensive, not sure 🤔why vs 440-platform $$ as it's cousin but compared with a big block Chevy'$ wow mopar has a tax on the top-end parts
to bad most are covered up ( clear or glass isn't common but cool to see in side 👍 ) in the engine bay but at least K-valve cover's castings magnesium/crome per-1975 look nice 👍so sexy
Many years ago when I was building my first stroker engine and ran into clearance issues. So naturally I went and started reading every engine building book I owned looking for guidance on how much and how to do it (because what else do you do when you are in your early 20’s and it’s late at night while assembling an engine that is supposed to bolt together). That weekend I went racing with a buddy of mine who ran Super Comp at a NHRA Divisional Event. One of the guys he raced with in Super Comp with was good friends with Tom Martino who happened to stop by his trailer and Ken told Tom I had a question about engine clearance issues. Tom kindly listened to questions and asked me about my engine combination and told my camshaft was wrong and besides giving me lots of advice he also gave me new-used cam and set of lifters (that honestly looked brand new) that he said would work for my application much better. As for the along advice he gave me about clearance for the block and rods or heads for pushrods it was the exact same as what Steve just said if you have clearance you have clearance and you only need a gnats @ss more because if the connecting rod or pushrods flexes, grows or bows while the engine is running you got bigger fish to fry than your connecting rods or pushrods.
Brilliant insight, thanks Steve!! It's like you've done this before! Appreciate your content!@❤
Dam thats an amazing build beautiful motor would love to have one
Its amazing to see what modern CAD and CNC has done to an engine that was designed 60 years ago. The thing is am absolute piece of art to look at. Amazing !.
Man, that Hemi is beautiful! All those pieces that make up the cam drive and blower drive are just like jewelry.
Your SMX and SML as well as the Noonan stuff is just amazing high horsepower artwork! Really enjoy all of the information you put out in the videos Steve!
The o-rings on the hemi heads are pretty slick. fire ring, head gasket . O-rings on the intake and rocker covers 👌😅Beautiful machine work 👍
Would have been nice if it had an oring for intake/valley cover so it didn’t need sealant in just one area.
I'm pretty sure they don't do that because of heads getting decked. That work would throw that sealing surface off. Ores better to use right stuff instead
Love watching you go through the process of BUILDING a motor from scratch. I build vintage race engines, mostly old European V12s, and the dummy build, dismantle, machine, refit, test, final assemble, dyno ect process is the same. Attention to detail, and proper seat of the pants engineering. Would love to come work in your shop. Keep up the good work, all that billet is AWESOME .
The engineering and attention to detail that went into that engine is amazing. No stones left unturned. I found the timing gear on the crankshaft to be quite unique. I'd like to see more of that in a later video. Thanks for a look into a most impressive engine.
Cool video, i really enjoyed the comparisons between the hemi and SMX. Thanks Steve!
Im in the UK, I m a regular mechanic, ive pulled the heads on one hemi (srt 300c) never even put a spanner to an LS engine. ive built and tuned an insane amount of 4v/cylinder engines. I always heard people refer to big bore v8 valves as dinner plates on sticks, but obviously never seen it in context. thank you for the videos.
This got my inner mopar breathing heavily. And I will forever love the look and complexity of the hemi valvetrain no matter how unreliable. Those heads are works of art, if Picasso built an engine it would be a hemi forsure
If you had seen any of Picasso’s paintings you would realize the engine equivalent would be a blown up Briggs and Stratton covered in dog crap.
@@krtacct😂😂
@@krtacct lmao thats pretty funny. I was more hinting at the new meme going around... "I like it, picasso"
@@krtacct True.
DaVinci is the artist you're looking for
You can have a nice over head cam V8. Top Fuel guys proved that back in the day with the 427 SOHC cammer. They found the chain to be the weak link and set up a gear drive for them. It works great and the engines sound great with it.
How far things have come in 50 years and the precision these engines are, Plus they are a thing of Beauty as well as making Huge amounts of Horsepower ,Just awesome Steve
Beautiful engine from Noonan a great Aussie company. 🇦🇺👍
The shop noise really wasn't that bad, to be honest I was so focused on looking at the engine and what you were saying I didn't notice at first lol.
i love the art of an engine and how therapeutic building one is. the muscle memory of knowing your tools, the feel of your mics, and the smell of a machine shop. the smile and giggles u get hearing it for the first time. i built bug engines to Dodges and they all made me feel 16 again hear my first engine build. thank for your time sir, making videos is time consuming. again thank u.
First time ever watching a hemi being put together. Love the detailed explanations. I definitely plan on watching more of your videos! Great content!
I think it says a LOT about the confidence Steve has in his own products and the enthusiasm that he has in general for the art of engine building that he's happy to make an hour long video showing him assembling somebody else's arguably competing product. And really not bad talking anything about it. Though I'm only halfway through :D :D :D
You sir are a legend. Thanks for sharing your knowledge, and being so transparent.
the oiling system to the top- end to the rockers of that hemi is not to far off of the old 390 427 ford fe engines and wanted to say your content and skills are awesome and just watched the video of how you got your start and that was great and i agree need more old school machine shops that are becoming few and far between now but hats off to you great stuff!!!
Those Noonan engines look so much nicer then the prolines.
They are and more dependable that's why otger shops use their stuff XRE uses Noonan and that's what Daddy Dave has in his new car and crybaby Justin just bought an XRE.
Than
@@internationaldynoauthority693 🤣
Even if you're not a mopar guy, it's hard to be not impressed by hemi engines. That engine is a beast and those ports are amazing.
In this day and age of what we are going thru, NEVER EVER apologize for back round busy sounds. Just keep going!
Not to mention it shows your in real life it's not staged ect I love the real side hearing banging in the back is music to my ears personally and it tells me people are working which is sorely lacking in this day and age.
@@devinej8411 you sir couldn't be more correct. This country is goin to hell n a hand basket.... no one wants to work anymore just sit on couch and collect checks from gov't . Sad indeed
This man has so much knowledge on engines it’s crazy! I learn something amazing every time I watch his videos.
Steve is the definition of cool and by far one of the most enjoyable guys to listen to on YT!!!
For a second there I thought you were going to have to tear it down again, it's always damage during shipping or lost packages that delays builds it seems like, anyways that is one good looking engine, watching you systematically build engines is super cool, amazing work
Nobody ships a 100 k. Plus motor. They most likely hire private shipping or deliver personally
Love the intro. I always learn something when I watch these videos.
Hemi heads just look awesome - great to watch a master at work 👍
Ax Man swears by these Hemi engines He has said they are extremely hard to hurt and its the only engine he'll run
3👍's up Steve Morris thank you for sharing your Great experience with us all
Good to see you acknowledge that Dewey has been supervising.
Love that with as far as things go a hammer handle is still the best way to install pistons.
It's just wild to me how you can see so clearly through the valve port in the heads to their respective manifold ports. It almost makes it look like a straight tube it's so open
Thanks for taking on the Noonan experience with you Steve. As always so much good information.
Don’t know if you planned it or not but it was cool seeing the head bolt pattern on your block in the background compared to the noonan block!!! You can see the round bolt pattern over the offset pattern of the noonan! It makes sense your block has a much better seal!!!
What a magnificent power plant!! Thanks Steve
Manton kicks ass and make AMAZING stuff..! On earlier promod, Top Alcohol, etc. etc. teams I worked on years ago, once going to Manton, it was just night and day, things just worked right and stayed nice! Granted, there was plenty of questionable value geometry on various teams I've worked on, haha, but I digress
Those main studs with the built in locators for the Caps are genius. You would think that you would see them used more for blocks who's mains that aren't pinned.
Really enjoyed the tutorial on different cylinder head types. There was a company about 10 or so years ago called Coates that created something they called the Coates Spherical Rotary Valve system. It was supposedly near zero-drag with no valves. I'd have loved to see how that would have worked on a billet Hemi engine like this with almost no theoretical redline.
My lord....what a beautifully engineered work of art. Seems like a shame to hide it under a car hood. I'd almost rather have it at the foot of my bed so I could stair at it every night in bed until I fall asleep...lol
The valves Konnigsegg freevalve system uses solenoids and oil presser to open the vales with out a cam. They don't even use a throttle body. Great video Steve.
Thanks Steve for explaining that wild hemi valve train set up! Definitely some give and take for HUGE valves. Not always best.
It appears you were handed a bunch of parts, and the customer trusted you to get them all in properly. Given the expense of the engine, that's a huge amount of trust.
Like always. Thanks man for teaching us everything you do. My pup says to tell your pup ,hi lol
Hone job looks super fine, very smooth.
Really ..really interesting stuff... Many thanks for taking the time to explain what's going on.
I'm too old to remember but how are they set up on an old-style Hemi engine valvetrain pushrod rocker arms come you know it sucks getting old
These videos are badass I need to take notes on how to stay calm when headaches show up. Getting towards the end and having that be out of round.
Thank you for taking care of Vances engines, i know you are the right man for the job !
Someday I will own the best engine ever…… a Steve Morris built engine 😎
Love learning about this I’m in the process of turning my S10 into a drag and drive vehicle now got old school sbc about 650 NA but fixing to go bigger one day I’ll have an SMX
Cheers Steve , I really did learn something , your a great teacher .
It’s cool to get to see inside one of those! Nice looking piece.
I've never enjoyed something I know so little about ever before!
For me, this is the epitome of state-of-the-ART; with an emphasis on art, as I think both the machinery and skills in putting it together are simply something amazing to behold.
Imagine was Michelangelo, or DaVinci would say!!!!
Anyone who has knowledge of what you do, understands you are in a “working shop” and noises goes along with it. I am still a working CNC Machinist for 42 yrs. I do not apologies for the noise, but do say sorry if you cannot hear me. I do now have those ‘kitty mics’ to filter out wind and some noise. Excellent vids!.
Even with his busy schedule Steve still takes time to make these videos!!! Wat a legend!!!!
Man I appreciate what you do Steve! I’m from the sprint car world, so not much relates to my world. Lol, buy I finally know why we HAVE to have titanium valves! We constantly trying to break the tire loose, but with drive! All about them RPM’s brother!
Loving the progress Matt you are getting after it. Love that turbo setup .
The high-dollar engines that are bringing built nowadays are nothing more than a work of art.
In 1991 I was twenty years old and i had a 540 cub inch engine built with aluminum block and heads.
At the time I thought it couldn't get any better than that.
Lol lol OK if you say so
Steve Morris Tech College 💪💪💪 great video excellent class Sir 🙏
Outstanding build. I'm really looking forward to seeing this one on the Dyno.
I miss turning wrenches. Keep up the great work!
Awesome video!! Thanks for imparting your knowledge. Cheers from Australia 🇦🇺
Well, that hour just FLEW by. Steve, you are the most entertaining engine builder on the internet. BY FAR!!! Thanks for all the enthusiasm and smiles as you put these masterpieces together. So much fun to watch. 😃😃😃
all dogs love hemi engines .
We ask for more and get a hour vid :). Going to have to wait tell I have a beer in my hand to watch it.
Steve your videos will be inspiring for future engine builders for sure. This will help everyone. 👌👌👌
The fact that any engine is producing over 2khp let alone 3k and 4k at 8-10k rpm will always be simple engineering done in an amazingly awesome way.
Excellent episode a man of many skills finding out what doesn't work then makes improvement's. Thank you team Steve for posting all the great videos on your TH-cam channel .
Super fascinating stuff Steve !
Thanks for bringing us along for the lessons .
Let’s take a moment and appreciate the class act this guy is. Working on another company’s engine and not bashing the guts out of them.
As always impressive the info you share. Thanks
This thing is going to be sick! Do you supply any motors to trophy trucks or offroad racing? I'd love to see some tech on those motors
Yes sir I will !!
@@stevemorrisracing cool!!
@@stevemorrisracing
He
These billet engines are so beautiful. Just like jewelry too pretty to abuse, but seeing the numbers they produce just puts me in a state of awe! ❤
Awesome video!!! Thank you, Steve!!
Hey Steve, remember to turn the Lav mic on and off between takes so the battery doesn't die on ya. Noticed that the Lav mic died, and the camera mic quality kicked in at about the half way point. Us old deaf guys have a hard time understanding it... too many years of listening to loud motors! : D
Great video... thanks for taking us along!
A true inspiration for quality and build integrity,thanks Steve.
Takes experience to put a Hemi together the best *as it is possible.* (Thanks for your details). I’ve seen one TH-cam contributor who has damaged a few of these engines running down the tracks. (At least one smoked engine by not having any rev. limitation control setup). Another damaged Hemi by running out of fuel, (fuel pump under-sized). On and on it goes - But they are impressive when they stay running for a few strip passes.
I like the way Steve says “that’s fine…” Reminds me of a southern person telling ya to “have a blessed day” if ya know what I mean
A solenoid is exactly what they use with free valve technology. You should check out the Koenigsegg free valve system. Pneumatic valves still run conventional camshafts, but the springs are replaced with compressed nitrogen. It's a very simple explanation I am giving lol.
A Hemi definitely looks nastier than a chev block, but is a lot more complicated, which is kinda weird as it’s still a push rod engine 😮
Would love to see you Viper Billet V10 also! Thanks for sharing this beautiful Hemi with us molar guys!
Great information , and lots of real nice eye candy ! Thanks so much Steve .
Christian Von Konigsegg developed the free valve system and uses it in his 5.0 300 mph + engines.
My dad was a mechanic and amateur racecar builder when I was a kid. He used to say engines are giant air pumps. if you want to make more horse power you need to flow more air.
FreeValve is both pneumatic and hydraulic, so you were correct. It's super expensive, and has to be controlled by the ECU, and an off the shelf ECU wouldn't have the capability to handle the valve timing and lift. You would need an ECU from them that has that capability, which I'm sure would be very expensive. You program the "cam" essentially. The really nice thing about that is you can essentially change the virtual cam to be anything you want without touching the engine at all.
That's one heck of a pile of cabbage and we caught our buddy Dewey snoozing in the comfy spot. LOL
If possible, can you cover in a future video the reason(s) why one would choose a Hemi as opposed to the SMX style of design? Seems like as you noted in the video that the cars cannot utilize the horsepower effectively so it's puzzling. Thank you for taking time out of the workday to share the plethora of information, even if a vast majority of us are either out of the tire turning game or simply cannot afford to build a car to run in the 6's.
I need to do my dishes , which in turn finally gives me the time to watch your informative video.....thanks Steve 👍
Appreciate your hard work doing all the videos.
Yes, use solenoid valves they work well in industrial applications
Goin back rewatching some older videos and shouldve left this comment on the killa b video but its jist very cool the way you can just make things happen. You guys make it work, make it fit make it fast. And thats awesome.
Always good to see a ... subject matter expert on the job.. ;)
I learned to build engines as a kid - before TH-cam - and built many daily driver and race motors over the years. I’ve always wondered if there was a professional way to do things. Then I watch your video and see a “professional “ use the same techniques I always have. For some reason that makes me feel legit lol
thanks Steve