Ive been watching car programs all my life. Speedvision, motor weekly, overhaulin, pinks stuff like that. Hoonigan seems to understand the car guy. Its not overproduced and if the subject matter is not your usual fair its still interesting. All this done on youtube not some major channel. Its really impressive what you guys got going here no bullshit.
i am a simple man, i see Dan or Brad making stuff in the shop, i click like with the force of a thousand suns, not only is it entertaining (both have great personalities) it is also educational!
Hopefully Zack's other half can recover from that incident. All the luck, courage and determination for both of them I also donate some some on the GoFundMe. 💪 P.S. Scumbags Family✌
Love this build! A thing to watch out for is the powerband with the cvt and the exhaust. Making the runner to the expansion chamber longer will change the motor's power band. CVT is engineered to keep the motor a set rpm where the most torque is. This is done with the spring. Maybe getting and expert to tune the cvt to the engine will give the best result. Maybe it's a bit to much and over the top, but for giving it a good hookup/low end torque the right tuning is essential.
Thehoonigans If you guys ever have a engine issue with that ultra, gimme a shout. Pround son of a 30+ year polaris tech. Thumbs up, so the guys never have a problem with this bad chicken!!!
Yeah, I bought a "torque ring" exhaust gasket which was like 1/2 inch instead of 1/8 inch and I actually noticed a little more torque and a little less top end
Yah, and risk a lean condition and destroy the engine straightaway or foul plugs over and over. Same with modifying the airbox. And jetting 3 carbs has to be APITA.
Hype-man Zac is best Zac! Also wishing Sage a speedy full recovery, (just donated.) Zac, if you see this maybe Pit Viper could help with the fundraiser too. I know you and the Hoonigans have done a ton for the brand's visibility lately. Maybe even auction a few pairs with some custom graphics from Jon...?
Now this is how you do series right on TH-cam! Still the same daily episodes but just better! And also way easier to follow on specific projects. I love it.
Snowmobiles?! Now you’re talkin bout my game 🤘🏼🤘🏼 invite me, I’m down to tear up the dock on a sled. First snowmobile burnout at the hoonigan compound 😂
brad, can you change the snowmobile heat exchanger in the track tunnel to a typical radiator? i know heats a issue with non air cooled sled motors, very cool build, love the t-bucket too
Theoretically if you lined up the drive clutch with the axis the control arm pivots around and mounted engine to the frame, wouldn't the axle stay the same distance away?
Guyz the expansion chamber is supposed to work with sound resonance. When the piston is traveling up after admission it might throw unspent mixture out of the exhaust. That's where that chamber comes it. The sound wave hits at the perfect time to stop that from happening. That's why you can't modify it in any way. Just take it out completely and put a nice big pipe it. You might even see flames out of the exhaust!
Fyi, you can also use a tensioner pulley to if you had mounted the motor to the frame. I did it both ways on two of my golf carts. One with a 340 artic cat motor and the other with a john deere 400 sir. I love your work. Thanks for sharing!
Bad Daddy Braddy’s killing it! Can’t wait to see this thing shred! I was going to ask to have it lowered on wheels but that exhaust is going to be a problem
I noticed that the golf kart has a CVT system in it. I didn't know that golf karts utilized CVT systems. the one's that I've worked on didn't have CVT systems in them. that's something I'm going to have to remember when searching for a rear axle assembly no doubt.
Love this project. Reminds me of our John Deere 210 that we put a Kawasaki 440 snowmobile engine on. Was extremely fun in the winter but would over heat fast in summer, hopefully yours is water cooled. Probably gonna get hot as hell running in LA, most of them are aircooled off snow.
Just some little advice, as there aren't two stroke guys around from what I can see. If you have the time, fit some propper exhausts. Every combustion chamber should have it's own exhaust pipe with a propper expansion shape, that's gonna give you more horsepower and is also going to improve the engine characteristics.
Step 1: click dat vid
Step 2: hit dat like
Step 3: watch and be happy
Step 4: learn da wae
Step 6: FIND DE QUEEEN!!!
Step 7: LS swap
Step 8: SEND IT!!!!!!!
Step 9: Donuts and Burn outs!!!
Step 10: SEND IT AGAIN!!!!
STEP 11: EXPLOOOOOSSSSSIIIOOOOOOONS!!!!!!!!!!
Should we slap a turbo and nitrous on this ?
yes
No, but you should name it "your mom"
Of course why not?!
Nitrous maybe. Turbo no.
Just do a nitrous build, would be really cool to see
Ive been watching car programs all my life. Speedvision, motor weekly, overhaulin, pinks stuff like that. Hoonigan seems to understand the car guy. Its not overproduced and if the subject matter is not your usual fair its still interesting. All this done on youtube not some major channel. Its really impressive what you guys got going here no bullshit.
I feel the same way. I like the rough ways of hoonigan with the pro production input. Its the combo of those 2 that makes it great.
Fuckin A
F*cking love these guys.
Agreed
Yeah but thay know that
Road kill did to
And look ware we are now 😢
Quality over everything !!!
TheHoonigans bring back shitcar
The reawaking of shit car. #TheShitShallRiseAgain
Radu Alexandru Shit car will be back soon. Harder, better, faster, stronger!!
TheHoonigans can’t wait for shitcars return!!
Did you guys pick a name for the golf cart yet
Finally! We get Bad Daddy Brad as the Episode Host.
Eratiik He’s building its so why not.
Those chest slaps look really brutal.
Brad is a great host! Thumbs up for Brad! And those chest-slaps were amazing...
i am a simple man, i see Dan or Brad making stuff in the shop, i click like with the force of a thousand suns, not only is it entertaining (both have great personalities) it is also educational!
joel sørensen Edutainment!!
Hopefully Zack's other half can recover from that incident. All the luck, courage and determination for both of them I also donate some some on the GoFundMe. 💪
P.S. Scumbags Family✌
Rodrigo Torres 🙏🏾🙏🏾
What happened? Keep reading comments, but have no idea what they are referencing. Sounds pretty devastating from the phrasing used in each comment.
zacks girlfriend was in a bad motorcycle accident. shes on the road to a long recovery. medical bills are gonna be through the roof
Rodrigo Torres link to the go fund me?
Cookeh same, I can't find what there talking about
I love all the videos you do but low key I miss shit car
No kidding, shitcar needs some love
High key
The hype level escalated really quick in the beginning
You guys are the best !!! Keep it up best channel on youtube !!
I love this project!! It's ridiculous! And Brad is doing a hell of a job!
Garage *Garaaaage*
Love this build! A thing to watch out for is the powerband with the cvt and the exhaust. Making the runner to the expansion chamber longer will change the motor's power band. CVT is engineered to keep the motor a set rpm where the most torque is. This is done with the spring. Maybe getting and expert to tune the cvt to the engine will give the best result. Maybe it's a bit to much and over the top, but for giving it a good hookup/low end torque the right tuning is essential.
Any additional pipe before the expansion chamber will lower the bottom end power on that bad girl, I bet it rips regardless. Just 2 stroke stuff
Guys don't forget to make a coolent Supplier and a Cooling element , because a snowmobile
Engine gets really hot after a while and can get destroyed
Thehoonigans If you guys ever have a engine issue with that ultra, gimme a shout. Pround son of a 30+ year polaris tech.
Thumbs up, so the guys never have a problem with this bad chicken!!!
you know its gonna be a good video when bad daddy brad says "its not a good idea"
You can't change the header length on an expansion chamber without effecting the performance aka powerband.
Yeah, I bought a "torque ring" exhaust gasket which was like 1/2 inch instead of 1/8 inch and I actually noticed a little more torque and a little less top end
Yah, and risk a lean condition and destroy the engine straightaway or foul plugs over and over. Same with modifying the airbox. And jetting 3 carbs has to be APITA.
Make sure you guys order about 5 belts just to have on hand ...
per video more like,
Things I don't have in my life... snowmobile powered golf cart.... Things I NEED.... snowmobile powered golf cart. Fuck yeah!
Hype-man Zac is best Zac! Also wishing Sage a speedy full recovery, (just donated.) Zac, if you see this maybe Pit Viper could help with the fundraiser too. I know you and the Hoonigans have done a ton for the brand's visibility lately. Maybe even auction a few pairs with some custom graphics from Jon...?
Now this is how you do series right on TH-cam! Still the same daily episodes but just better!
And also way easier to follow on specific projects. I love it.
Snowmobiles?! Now you’re talkin bout my game 🤘🏼🤘🏼 invite me, I’m down to tear up the dock on a sled. First snowmobile burnout at the hoonigan compound 😂
yeah, its safe. (snort) no its not. lol. Classic Hoonigan spirit
Zach, your a beast, just like that sno-mobile motor
Colin Hawley it's an engine
Bad Daddy "It goes like whoooosh" Brad
GOD BLESS BRAD! NO ONE IN THE WHOLE GARAGE COULD HAVE DON THIS SHIT WITH EXCEPTION OF ROB AND DAN TOGETHER
The production value on these episodes is sooo awesome !! Shout out to the Hoonigan Camera team they’re the best !!!
So happy Brad works for hoonigan. He’s been fantastic
I just lost my license for prostitution and I’m totally adding a 2 stroke motor to this dead Hobos bike I stole. Pretty stoked
yeah same
Damn😭😆
Scooter bro
Casey Gray very proud of you
lol wtf
I just want to say how great it is to see Bad Daddy Braddy's evolution into the Hoonigan crew.
The beginning of this episode was pure gold! Keep it up hoonigans
I love how much Dan and Brad have come out of their shells. Great additions to the team.
braddy is honesly perfect for hoonigan, i just love how he started as a guest and almost immediately became part of the team
cant believe its been 10 months since braddys episode already
i like how Brad was just someone that took his LS rat rod there and now is on the channel doing epic stuff and setting things on fire
brad, can you change the snowmobile heat exchanger in the track tunnel to a typical radiator? i know heats a issue with non air cooled sled motors, very cool build, love the t-bucket too
Theoretically if you lined up the drive clutch with the axis the control arm pivots around and mounted engine to the frame, wouldn't the axle stay the same distance away?
Can't wait to see this cart running!
I need to start everyday the way Brad and Zach started this episode
the new format is the greatest thing since the big bang.
Brads actually hell chill, who would have thought
Brad is great! Loving the new format!
Garage garage, is one of my favourite new shows since I'm a techie and mechanical sort of guy, love the build part more than the actual driving haha.
Again with another banger
Guyz the expansion chamber is supposed to work with sound resonance. When the piston is traveling up after admission it might throw unspent mixture out of the exhaust. That's where that chamber comes it. The sound wave hits at the perfect time to stop that from happening. That's why you can't modify it in any way. Just take it out completely and put a nice big pipe it. You might even see flames out of the exhaust!
Great scene between Brad and Zac!
bad daddy braddy is a very underrated addition to the hoonsquad
Projects like this motivate me so much to learn and one day be able to accomplish on my own.
So glad that hoonigan was smart enough to hire brad, fits the doughnut shop so well
Maaaan the knowledge it takes to be able to do something like this is immense
Fyi, you can also use a tensioner pulley to if you had mounted the motor to the frame. I did it both ways on two of my golf carts. One with a 340 artic cat motor and the other with a john deere 400 sir. I love your work. Thanks for sharing!
Thank u Brad and mister editor.
The best Car related channels On youtube!! Keep them Insane Shenanigans Moments!
Safety is third or fourth, wherever you can work it in. No worries.
Bad Daddy Braddy’s killing it! Can’t wait to see this thing shred!
I was going to ask to have it lowered on wheels but that exhaust is going to be a problem
Can't wait for some golf cart burnouts
BadDaddyBraddy and DangerDan are the real-deal when it comes to #ThatsAWrap!!!!!, bravo gents.
Can't wait to see the finished project. Love your guys work. Keep it up
I really enjoy these build vlog style videos!
Brad is a great addition to hoonagin
I'm liking the schedule! I honestly liked the randomness of the channel, but this makes it easier to keep track of it all!
lovin this garage garaaaage
Zac and Dan are the Best!
3:30am? Perfect way to spend my lunch
Those Motors sound amazing with triple pipes
After this do an LS Swap series!!
Don't forget to order new o rings. All the shouty stuff is going to pop something, sooner or later.
bad daddy braddy ftw, love watchin this guy
Bad daddy hella killed the last clip!!
New format is fire 🔥
Maybe in the future a 1000cc snowmobile engine could be arranged
I noticed that the golf kart has a CVT system in it. I didn't know that golf karts utilized CVT systems. the one's that I've worked on didn't have CVT systems in them. that's something I'm going to have to remember when searching for a rear axle assembly no doubt.
One second short from a perfect video length! What a missed opportunity
Cant wait for episode 3 ✊🏾
Again, Brad is actually a really good host
Badass golf cart build!
Zac is the hype man.
Ive been wanting to build a similar golfcart like this! so This is rad that you guys are sharing the build!
YEEAAahhhhhh the new format is sick
You guys live the life I seek. Thank you and damn you at the same time.
How did you not go insane with the time lapse clicking every few seconds
Brad is a legend
That intro was funny as hell..... keep on keepin on.
Brad and dan are my favorite
Garage
*GARAGE*
Love this project. Reminds me of our John Deere 210 that we put a Kawasaki 440 snowmobile engine on. Was extremely fun in the winter but would over heat fast in summer, hopefully yours is water cooled. Probably gonna get hot as hell running in LA, most of them are aircooled off snow.
Just heard ya say ya gotta drain the coolant. Mega good choice getting a watercooled one!
This project is rad. Into it
when Zaccame in i laughed so hard. you guys are amazing!
stoked for this build
Garage Garage segment intro needs to have a solid 80s screeching vocals yelling "Garage Garaaaaaaaaaaaage!"
Just some little advice, as there aren't two stroke guys around from what I can see.
If you have the time, fit some propper exhausts. Every combustion chamber should have it's own exhaust pipe with a propper expansion shape, that's gonna give you more horsepower and is also going to improve the engine characteristics.
Sweet project. Love these kinda vids.
I think the picture of Brad on the golf cart should be a sticker. It had me cracking up 😂
Lol i thought Zac was about to give ole Brad a heart attack! That may be a little tooool extreme for him LOL
i need to make an alarm out of the first 40sec of this - its hysterical!
2:09 "Looks like everything looks good" - bad daddy
What did Bad Daddy Braddy do before Hoonigans? Most fabricators can't host, most hosts can't fabricate. Brad is awesome at both!
that intro was legendary 😂😂💀
Zac is the god damn man! He is the essence of a Hoonigan! hahah!