I have been watching you for a couple of years. I am a Gas Safe engineer and I have learnt so much. It is a simple way of training which it makes it easy for me to understand and apply. With modern boilers coming out with lights and codes that sometimes can be misleading and stressful but your methods of testing components are brilliant. So thank tou. ANTHINY KELLY
Nice one Allen in my opinion I usually say someone doing services in under one hour it's not had a real good clean. I generally take 1.5 - 2 hrs but that's just my way others would disagree cheers for the update on the Vokera.
Could it have been a second hand boiler sold as new by the installer? I mean, chances are the home owner would never have known they were getting a used unit. From the outside it would look new to a customer.
your co2 levels don't match what it states in the service manual I maybe looking in the wrong area but for that boiler it states it should be 10.5 for max and min ? Can I please clarify
I have this boiler,but don’t have a wall thermostat,is it possible to fit a hive or similar type,as I have no clue what temperature my heatings on,I’ve got my left knob on 6 1/2 dots and right on 5th dot,boiler pressures on about 1.5bar,thanks if you can help 👍🏻👍🏻👍🏻👍🏻👍🏻
I had a new easy heat ci fitted last week. When internal clock set to auto it won’t turn off. Re programmed timer three times now and put back in default mode. But still will not turn off when even selected to off on the clock. Any idea what’s wrong ? I don’t have an external clock yet.
Hi Allan, called to Vokera Easi heat today and noticed first thing no pressure but boiler worked ok for hot water i have recommended a new pressure switch, but do you have any opinion that it could be anything else like PCB. all analyser reading are ok.
Hi Alan, when you read the service manual it does not make it clear that you have to turn the control knob to that position, lost in translation I think.
Alan plz plz help me I have started plumbing in Brunel construction center Huddersfield and I’m currently just joined level 1 and can you show me how to do things like soldering bending pipes and all that because I’m quite bad at it and it’s stressing me out brother ☹️
Iv got same boiler fires up stays on the flow at boiler goes red hot at boiler boiler cuts off then fires back up 20secs later and does that constantly
Can you help me please how do I put it to the setting where the boiler will automatically kick on when the temperature below my thermostat drops if that makes sense please
I’ve got a salus thermostat on the wall, what setting do I put my boiler so if my temperature in my house drops below 20 degrees my boiler will come on and heat the house I need to manually put my boiler/ radiator on and on
Hi Allen, love your videos as I find them very educational and interesting. I'm glad Vokera sorted out the problems, I think it's correct that it is a few years old and poorly installed and maintained. As for a future boiler, that would depend on your heating and hot water needs. If it is just a swap in my opinion eiher Baxi 800, ideal Vogue max or maybe the new Viessman 100 that are Hydrogen gas ready. Just a layman's opinion.
They appear to be using a traffic light sequence on the indicator lights, red, green, so I guess the true description of the confusing colour should be amber.
Mine has been nothing but trouble I got ripped off by an engineer charging me £300 to replace gas valve,not long later it failed again Not happy at all.
I have been watching you for a couple of years. I am a Gas Safe engineer and I have learnt so much. It is a simple way of training which it makes it easy for me to understand and apply. With modern boilers coming out with lights and codes that sometimes can be misleading and stressful but your methods of testing components are brilliant. So thank tou.
ANTHINY KELLY
The instructions are not always easy to understand either. Thank you so much for watching. Are you going to installer this year? Thanks.
Great to see your presence Al, Stay blessed always 🙏🏽
Thank You
19.30 Dublin.
Great videos Alan
Much appreciated from Dublin
Nice one Allen in my opinion I usually say someone doing services in under one hour it's not had a real good clean. I generally take 1.5 - 2 hrs but that's just my way others would disagree cheers for the update on the Vokera.
Thank You
Hi Allen thanks for sharing your knowledge with your videos. In Greece we have the Riello Kis combi boiler which is exactly the same
Great advice simply explained . New to your videos . Enjoying them very much thanks for taking the time to help and advise .👍
Thank You
Allen i would like to see how do you clean this type of heat exchangers
Can you do a vid on a strip down service on the easi heat ?
yes i will do that. thanks.
Could it have been a second hand boiler sold as new by the installer? I mean, chances are the home owner would never have known they were getting a used unit. From the outside it would look new to a customer.
It’s hard to tell but I honestly don’t believe its one-year-old. Thanks.
Hi Allan. I always struggle with the unica getting into service mode.
Good video Allen, looking at that HEX, if it wasn't faulty, it would of been some task to get it cleaned up.👍🏾
Thank You
Hi can you please do a video on this boiler and fitting the nest heat link to it?
your co2 levels don't match what it states in the service manual I maybe looking in the wrong area but for that boiler it states it should be 10.5 for max and min ? Can I please clarify
I have this boiler,but don’t have a wall thermostat,is it possible to fit a hive or similar type,as I have no clue what temperature my heatings on,I’ve got my left knob on 6 1/2 dots and right on 5th dot,boiler pressures on about 1.5bar,thanks if you can help 👍🏻👍🏻👍🏻👍🏻👍🏻
I am looking for a solution for the same problem. I am renting a new property, and there is no thermostat, did you manage to install it for yours?
@@JessLord1 I had the google nest system fitted
Where is the frost position on that exact boiler. Thanks
I had a new easy heat ci fitted last week. When internal clock set to auto it won’t turn off. Re programmed timer three times now and put back in default mode. But still will not turn off when even selected to off on the clock. Any idea what’s wrong ?
I don’t have an external clock yet.
Brilliant video as usual
Thank You
Hi Allan, called to Vokera Easi heat today and noticed first thing no pressure but boiler worked ok for hot water i have recommended a new pressure switch, but do you have any opinion that it could be anything else like PCB. all analyser reading are ok.
hello a question I want to know what happens to the boiler if I turn off the heating?
Hi Alan, when you read the service manual it does not make it clear that you have to turn the control knob to that position, lost in translation I think.
Hi Steve. I totally agree the installation and servicing instructions are not the best with this boiler. I did mention that to David. Thanks.
Alan plz plz help me I have started plumbing in Brunel construction center Huddersfield and I’m currently just joined level 1 and can you show me how to do things like soldering bending pipes and all that because I’m quite bad at it and it’s stressing me out brother ☹️
Hi N0B0DY. Not a problem at all. I will upload some videos soon. Thanks.
On the vokera hot water working ok one tap running open another tap hot boiler goes into reset continually red light any suggestions.
i love your videos
Thank you Mum.
Bless you your son is a very good plumbing/TH-camr ❤️❤️
Iv got same boiler fires up stays on the flow at boiler goes red hot at boiler boiler cuts off then fires back up 20secs later and does that constantly
Hi . How to check AO1 error code on vokera ?
Can you help me please how do I put it to the setting where the boiler will automatically kick on when the temperature below my thermostat drops if that makes sense please
What do you mean lol. Thanks.
I’ve got a salus thermostat on the wall, what setting do I put my boiler so if my temperature in my house drops below 20 degrees my boiler will come on and heat the house I need to manually put my boiler/ radiator on and on
@@shannonthomson7270 there are lots of salus controls, which model is it
@@AllenHart999 rt510tx
@@AllenHart999Hi, can we install a thermostat for this boiler? Is it possible?
Viessmann 111, baxi 800 or an ideal Logic Max. All are great boilers 👍.
Maybe ASHP, Not sure yet. Thanks.
Anyone had a problem with the float in the condense trap sticking on these
Yes, you need to clean that stupid ball inside them really well or they stick.
Yes yes and yes. Thank You.
Viessmann 100w, easy to range rate and adjust pump curve. Easy to service and replace parts.
did you watch this one? interested to hear your thoughts? Thanks. th-cam.com/video/zAJPovHxtXs/w-d-xo.html
Hi Allen, love your videos as I find them very educational and interesting. I'm glad Vokera sorted out the problems, I think it's correct that it is a few years old and poorly installed and maintained. As for a future boiler, that would depend on your heating and hot water needs. If it is just a swap in my opinion eiher Baxi 800, ideal Vogue max or maybe the new Viessman 100 that are Hydrogen gas ready.
Just a layman's opinion.
I am thinking of ASHP at the moment but I might change my mind. Thanks.
Hi my pressure is low how to topped up ? Thanks
Thanks very much for your comment, please consider subscribing to support the channel 🙂
No pressure please help
Please don't put a combi in . Megaflo & new boiler Glow worm valiant 👍👍
Great vid
I might put ASHP in and see how it goes. Thanks.
They appear to be using a traffic light sequence on the indicator lights, red, green, so I guess the true description of the confusing colour should be amber.
Thanks.
Installed Viessmann vitodens 100w 35kw combi
Regards
Faruk
Definitely a good boiler. Thanks.
The ball in the trap gets jammed and the boiler fills up with condensate water..
My guess is:that your new boiler DEFINITELY wont be a BAXI - I think you will be tempted with an IDEAL VOUGE C32 gen 2.
Maybe ASHP, Not sure yet. Thanks.
100% what u said happened, they had it fitted cheap on a cash job, then got a cert to sell it.
Thank You
💝💝💝
Thank You.
IT'S Amber Allen
Thank You
Mine has been nothing but trouble
I got ripped off by an engineer charging me £300 to replace gas valve,not long later it failed again
Not happy at all.
Ne ho trovate molte così...ma dopo 2 o 3 anni....fanno le finte manutenzioni e il cliente si trova a dover cambiare scambiatore!