The 4th Gen Made HOW MUCH Horsepower?!? (DITL 41)
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- The 4th Gen Camaro SS is finally finished after some holdups concerning fitting the 103mm throttle body to the SLP cold air intake, and man does this thing run!
Follow us on Instagram and Facebook: @everythingfastusa @moonlightperformance
Hell yeah!!! Mine made 473 through an auto. Nice numbers man.
What’s it have for exhaust? 472 is damn good for NA setup
Ls1? What's heads and cam? Long tubes? Etc etc. I'm going back in with a ls2, stage 2 mechanics sloppy cam, fast 102 intake, ls3 top end. Pulled it out of s wrecked gto with 11k miles. He said it made 480 to the wheels. I think with the right tuner it should make 500 rwhp through a 4l80
Those are great numbers for an auto!! Update when the bigger injectors are in, you could always use decapped ls1 injectors. They flow like 80 pounders and no need to make big changes to the injector tuning table. Hopefully a bigger fuel pump is used as well.
Will do! The owner of this one lives decently far away, but he is happy with it. Hopefully one day it’ll come back through! Stay tuned for everything else that comes through the shop, we’ve got a couple Cool builds in right now 🤘🏻
@@EverythingFast oh yeah I'll keep an eye out!
³r 555³😮
What kind of drivability issues would you have if you get in deep traffic?
what prc heads? i have an a 98ss, getting upgraded in a few weeks, 243 prc heads, custom cam 231 235 629 629 113, 102 fast, speed engineering heads and true duals, guessing around 450 also..
stock 26#s injectors x16= 416hp max and my stock injectors ran out at 390hp @5800
how is the 10 bolt holding up if it still has it?
Pretty easy when it doesn’t hook. Olds man’s garage lives a good while around the 540whp range while hooking
Was the numbers sae or standard?
I believe that was standard, I could be wrong. I think that was a little bit before we started going with no power correction.
Mods?
Texas Speed Magic Stick 3, Atomic Intake, 103mm throttle body, PRC heads, headers, SLP cold air intake, dyno tune.
What are the specs on the cylinder heads
Where is this shop located?
@bennyandgeorgia1 Cumming, GA