Hi Scott, they have a video giving exact dimensions and weight of the bar. They maintain that the bar is the key, in the comments of that someone said Gallium Aluminium and silver was the material "something" alpha that they showed, interestingly it seems that Gallium when magnetised can lift 10,000 times it's own weight and when it reacts with Aluminium it reduces the Alu to nanoparticles, it also reacts with silver and under certain conditions does something with the ions. I saw a silver table that seemed to show silver 108 decays or by some process turns into palladium 108, I could have read it wrong though 😎👍
Hello Jerry. I'm sorry, I didn't see your comment until just now. There are so many possibilities. I feel that much more SPECIFIC and DETAILED information is needed regarding the bar's construction. Thank you.
Hello Gerry, That is very interesting but with a LIFETIME of experimentation and variables without SPECIFICS. I've seen the videos on how the aluminum reacts to gallium. Specifics would be critical regarding how that could be manufactured. Thank you
Itu masuk akal dan logam aluminium perak juga masuk akal,itu sangat sempurna,seperti membuat piezo electric crystal maksud anda bukan? Jangan lupa untuk mempararel kondensator 90mf untuk aktifkan arus listrik terimakasih.
Aluminium/Aluminum Silver (AlAg) Master Alloy Chemical Composition The following table shows the chemical composition of aluminium/aluminum silver master alloy. Element Content (%) Aluminium, Al 89-91 Silver, Ag 9-11 Applications Aluminium/Aluminum silver master alloy can be used for alloying silver into aluminium.
@@ed7142 Hello, Interesting idea about silver plating the exterior of the bar. There are many alloys that I am now seeing that contain percentages of silver in the 20% range. Supermalloy, Zinag and others. It would be very helpful however to have more specific details regarding the ACTUAL construction of the bar and what characteristics are needed for the device to operate as demonstrated in the video. Thank you.
Hi Scott,The delta connection exemplified in the liberty engine 3.0 video cannot produce induction, you can see the 220v delta connection for a 380v 3phase induction motor how to produce induction so that it can be changed to a real liberty engine 3.0
Hello and congratulations on your achievement. Can you help me find an Argalium Alpha bar because it is impossible to find one in my country? Thank you and congratulations again.
Hello, Here is a link to a company that sells many different alloys. I don't know if they have the particular alloy that everyone is looking for but here you go. Good Luck! www.tavasyaindustries.com
Hello, If the exact composition of the bar is so critical, how can it be made with a description of “MAINLY” and what about the closeup view of it showing the laminations?
@@ScottFogarty-iv9wtmungkin sesuatu di rahasiakan dalam konsep liberty engine 3.0 sepertinya harus menambahkan kapasitor 90mf di rangkai paralel untuk aktifkan arus listrik.akan tetapi saya tidak tahu dimana kapasitor itu di sembunyikan.apakah itu sama dengan konsep tesla coil jika sama apakah penambahan ø25mm keping piezoelectric di tambahkan pada batang almunium perak?
i think you should replace the stand by magnet, negative pole on the bar.. stand made with non magnetic material under the core and outside negative pole on the core use neodym magnets only
Доброе утро Валерий! Изучите и поймите наличие и работу скалярного магнитного поля Николаева!Успехов вам! Данная схема природоподобна и имеет смысл раздвигать горизонты её возможностей! 🧲🙏
Hello, Scott. My name is Valery and I'm a mechanical engineer. I have built the same (#3) alternator and am following your experience with interest - it's interesting ... I have a problem with my alternator and this is apparently the step you have already gone through ... When you plug the Synchronous Motor into the socket block and rotate the shaft, the multimeter and the light bulb in the block shows the voltage (with the switch open). But if the switch is closed, the multimeter in the socket block and on the motor terminals shows "0" voltage. What is the problem?
Hello, I'm aware of that. I've mentioned that in many videos (in fact in this video) but magnetic flux is. Flux is in the bar and core and it's waiting for something to move it past the coils to generate the current. Thanks for your comment.
Магнітний потік статичного магнітах можна затормозити зустрічною катушкою електромагнітна ! А потім поміняти напрям току електромагніта --- і напрям руху поля постійного магніта і електромагніта будуть співпадати !!! І магнітний потік буде більший у 2 рази !!! Буде змінне магнітне поле --- і генерація у статорній катушці !!!
I dont think the size ore dimensions of the bar is the missing link...it should work with longer thicker even other material......theres somewhere an information they wont tell...pherhaps because they dont want to be a missing link 😅😅😅
Hey, so I built my own version of this "engine" used 230 volt microwave transformers, modified, mounted them, gutted a 230 volt 3 phase induction motor, built 2 bars - "cylinders" one is made out of steel the other stainless steel, have two 230 volt turn table motors ( reversed to act as 230 generators) like yourself nothing works. I was not able to produce a power output. The reason being and you mentioned it in this video - movement - if you move a magnetic field across a coil (inductor) . or reverse a inductor across a magnetic field you will get a reading. You will have produced power. At the beginning back in 1800's I think it was 12 years before a man named Faraday suddenly came up with the idea move the magnet. That thought changed the world. Regardless as you should I will continue. Go to the "right hand rule" This will give you the direction of your fields, magnetic flux. One thing you need to take note of is it takes a force to produced power. Gets those electrons in the conductors moving. To do so aa, the conductor needs to be perpendicular to the magnetic field. I see you have fields here. It is not enough to break the plane in the field with a conductor it needs to be done repeatedly or nothing will happen. You can have a conductor in a magnetic field and nothing will happen. No output. Looking studying Free Energy's engine there are no parts moving. Were they I don't see where their conductor is or are. The bar they have in the center of the motor is suppose to be a conductor but it isn't perpendicular nor even slightly sideways to any of the fields being or potentially being produced, What does this mean it means were you to put power to their engine and I did so, DO NOT DO THIS UNLESS YOU Are PROTECTED WITH GLOVES, THE RIGHT KIND OF EQUIPMENT. ALSO YOU DON"T HAVE A PACEMAKER OR ANYTHING ELSE THAT WILL MESS WITH YOUR HEART. I did so. I connected the replica engine that I put together to 230 volts. I had a switch in the circuit so if things got hot I could switch it off. Things got hot very quick. I found learned all the fields are going in the same direction. The left transformer same direction as the field, flux in the motor, as in the transformer to the right.. If I placed a compass which I will next to each this compass or the compasses would show all the field lines going in the same direction.. Another indication no work is being done, no power is or can be produced. Technically this is how this free energy engine is suppose to work, the two, left and right transformers are suppose to produce 230 volts. This voltage is suppose to power up the 3 phase induction motor which converts this voltage into the fields that induce their magical bar. which in turn I guess feeds the transformer coils. IF it is the magic bar that's the problem, I don't know because like yourself I don't have a bar with their formula. It's suppose to be a special alloy. Still there is a possibility you just have to add something things like batteries. 230 volts worth, Converters to convert 230 power. and the bar needs to be perpendicular to the field. or act as if it is. And be able if not create movement somehow stimulate physically stimulate movement. chow.
The frequency comes from the generators as the magnets pass the coils at 50 to 60 cycles per second no matter how many poles/phases. Explain to me how this machine would make Hz. DC might kinda make sense but not AC as there is nothing to alternate the current. It doesn't make sense. Has anyone seen this work in real life? The answer is no.
Witam, mój angielski jest słaby i nie wszystko rozumię, ale interesuje mnie ten projekt i na coś wpadłem. W środku tego czpienia jest rtęć, bo przy pierwszych komputerach podobnie stosowali ten patent, by ustabilizować przezył. Zaraż wyślę link, ok.
Interesuję się historią i naziści dużo rtęci na swoje eksperymenty zużywali. Może to jest ten klucz, tylko teraz trzeba to w odpowiednich proporcjach poskładać na pewno. Pozdrawiam i powodzenia życzę ;)
Finally somebody with a brain. The frequency comes from the generators at the generating station. This could possibly make DC that's the only type of free energy you would get. The surrounding ether is the ground and the sky if the Earth is a huge capacitor which it is. So how does he run power tools that have a frequency rating? This thing is a capacitor and there's only a start or run capacitor. Start is directional so it's DC. A running capacitor smooth out your signal and sets your speed. In my opinion this machine will never work.
In order to get EMF or electromotive force that's achieved by the magnets passing the coils and moving the electrons. This thing has nothing to move it unless it's the output like the grinder or a light bulb which I don't understand. The Liberty engine number 2 I do understand it makes total sense his generator makes more power than the motor needs to run and he's only using two poles to run is 220 motor. The other two poles are for extra power.
Copy exactly what he did... It does work! don't say it does not work until you replicate what he did This is frustrating that people do something different, and say it does not work.
Xcuse my Terrible Englisch...i also want to build this engine. It wont let rest my mind becauseif it works its so stabil because there are no parts wich rotate make noise and list of Energie...but in my understanding they left a verry important information like the missing link why its not running....i thought long tome nd searched lot of information....in my mind the only way would be to get another phase from the magnetic field to get a constand field....Pherhaps the did a bedini thing with the engine and took this Phase...its just an idea and for me one of the last Thing i can imagine why not work...th-cam.com/video/LkkcAi35CAA/w-d-xo.htmlsi=Qr2jEYcpZqlgtMVA There one guy xplains the bedini engine wire Thing...sry not know right englisch word.....i hope you will Figuren out how it works...
As usual, you put a lot of thought into trying to achieve something that is probably originally laid up to be a scam. However, I like the fact that you see the layers in the bar. My only regret is that you say. Umm umm umm 138 times. for me, it’s quite annoying. It makes it difficult to listen to your video.
Hi Scott, they have a video giving exact dimensions and weight of the bar. They maintain that the bar is the key, in the comments of that someone said Gallium Aluminium and silver was the material "something" alpha that they showed, interestingly it seems that Gallium when magnetised can lift 10,000 times it's own weight and when it reacts with Aluminium it reduces the Alu to nanoparticles, it also reacts with silver and under certain conditions does something with the ions. I saw a silver table that seemed to show silver 108 decays or by some process turns into palladium 108, I could have read it wrong though 😎👍
Comment sappel la bar central alluminium energique qui passe barre en barre le le coil et ec-ceque sa fonctionne vraiment.
Hello Jerry. I'm sorry, I didn't see your comment until just now. There are so many possibilities. I feel that much more SPECIFIC and DETAILED information is needed regarding the bar's construction. Thank you.
Hello Gerry, That is very interesting but with a LIFETIME of experimentation and variables without SPECIFICS.
I've seen the videos on how the aluminum reacts to gallium. Specifics would be critical regarding how that could be manufactured.
Thank you
That thepends on the Coils and the in /output.
Nice work your achieve!
Greetings Sven
Thank you
You need to put in a quartz oscillator between the coils.
That is self oscillator Frequenties, it will whork.
Good luck,
Greetings Sven
What frequency does it oscillate at?
Itu masuk akal dan logam aluminium perak juga masuk akal,itu sangat sempurna,seperti membuat piezo electric crystal maksud anda bukan? Jangan lupa untuk mempararel kondensator 90mf untuk aktifkan arus listrik terimakasih.
Aluminium/Aluminum Silver (AlAg) Master Alloy
Chemical Composition
The following table shows the chemical composition of aluminium/aluminum silver master alloy.
Element Content (%)
Aluminium, Al 89-91
Silver, Ag 9-11
Applications
Aluminium/Aluminum silver master alloy can be used for alloying silver into aluminium.
Apakah perlu dilakukan penyepuhan perak terhadap aluminium?
@@ed7142 Hello, Interesting idea about silver plating the exterior of the bar. There are many alloys that I am now seeing that contain percentages of silver in the 20% range. Supermalloy, Zinag and others. It would be very helpful however to have more specific details regarding the ACTUAL construction of the bar and what characteristics are needed for the device to operate as demonstrated in the video. Thank you.
Have you tried using a Neodymium Tube magnet ?
Hi Scott,The delta connection exemplified in the liberty engine 3.0 video cannot produce induction, you can see the 220v delta connection for a 380v 3phase induction motor how to produce induction so that it can be changed to a real liberty engine 3.0
Hello and congratulations on your achievement.
Can you help me find an Argalium Alpha bar because it is impossible to find one in my country?
Thank you and congratulations again.
Hello, Here is a link to a company that sells many different alloys. I don't know if they have the particular alloy that everyone is looking for but here you go. Good Luck! www.tavasyaindustries.com
If you don't want the mount to interfere just move it to the sides or bottom. No need to go through all of the effort and cost
Composition: Argalium Alpha
Total Volume: 124.96cm³
Theoretical Weight: 884g
Density: 7.09g/cm³
SILVER and ALUMINIUM
alloy mainly
Cylinder dimensions:
Diameter: 29,22mm
Length: 189,63mm
Depth: 26,30mm
M-8 tapped hole: 6,84mm
M-8 threaded bolt: 7,79mm
Hello, If the exact composition of the bar is so critical, how can it be made with a description of “MAINLY” and what about the closeup view of it showing the laminations?
@@ScottFogarty-iv9wtmungkin sesuatu di rahasiakan dalam konsep liberty engine 3.0 sepertinya harus menambahkan kapasitor 90mf di rangkai paralel untuk aktifkan arus listrik.akan tetapi saya tidak tahu dimana kapasitor itu di sembunyikan.apakah itu sama dengan konsep tesla coil jika sama apakah penambahan ø25mm keping piezoelectric di tambahkan pada batang almunium perak?
Search for Silmanal (Silver Mangan Aluminium) alloy magnetic properties for bar material.
i think you should replace the stand by magnet, negative pole on the bar..
stand made with non magnetic material under the core
and outside negative pole on the core
use neodym magnets only
Hi Scott, did you manage to turn it on?
Доброе утро Валерий! Изучите и поймите наличие и работу скалярного магнитного поля Николаева!Успехов вам! Данная схема природоподобна и имеет смысл раздвигать горизонты её возможностей! 🧲🙏
Hello, Scott. My name is Valery and I'm a mechanical engineer.
I have built the same (#3) alternator and am following your experience with interest - it's interesting ...
I have a problem with my alternator and this is apparently the step you have already gone through ... When you plug the Synchronous Motor into the socket block and rotate the shaft, the multimeter and the light bulb in the block shows the voltage (with the switch open). But if the switch is closed, the multimeter in the socket block and on the motor terminals shows "0" voltage. What is the problem?
Hareketsiz mıknatıstan enerji çıkmaz.
Hello, I'm aware of that. I've mentioned that in many videos (in fact in this video) but magnetic flux is. Flux is in the bar and core and it's waiting for something to move it past the coils to generate the current. Thanks for your comment.
Магнітний потік статичного магнітах можна затормозити зустрічною катушкою електромагнітна ! А потім поміняти напрям току електромагніта --- і напрям руху поля постійного магніта і електромагніта будуть співпадати !!! І магнітний потік буде більший у 2 рази !!! Буде змінне магнітне поле --- і генерація у статорній катушці !!!
I dont think the size ore dimensions of the bar is the missing link...it should work with longer thicker even other material......theres somewhere an information they wont tell...pherhaps because they dont want to be a missing link 😅😅😅
Hey, so I built my own version of this "engine" used 230 volt microwave transformers, modified, mounted them, gutted a 230 volt 3 phase induction motor, built 2 bars - "cylinders" one is made out of steel the other stainless steel, have two 230 volt turn table motors ( reversed to act as 230 generators) like yourself nothing works. I was not able to produce a power output. The reason being and you mentioned it in this video - movement - if you move a magnetic field across a coil (inductor) . or reverse a inductor across a magnetic field you will get a reading. You will have produced power. At the beginning back in 1800's I think it was 12 years before a man named Faraday suddenly came up with the idea move the magnet. That thought changed the world. Regardless as you should I will continue. Go to the "right hand rule" This will give you the direction of your fields, magnetic flux. One thing you need to take note of is it takes a force to produced power. Gets those electrons in the conductors moving. To do so aa, the conductor needs to be perpendicular to the magnetic field. I see you have fields here. It is not enough to break the plane in the field with a conductor it needs to be done repeatedly or nothing will happen. You can have a conductor in a magnetic field and nothing will happen. No output. Looking studying Free Energy's engine there are no parts moving. Were they I don't see where their conductor is or are. The bar they have in the center of the motor is suppose to be a conductor but it isn't perpendicular nor even slightly sideways to any of the fields being or potentially being produced, What does this mean it means were you to put power to their engine and I did so, DO NOT DO THIS UNLESS YOU Are PROTECTED WITH GLOVES, THE RIGHT KIND OF EQUIPMENT. ALSO YOU DON"T HAVE A PACEMAKER OR ANYTHING ELSE THAT WILL MESS WITH YOUR HEART. I did so. I connected the replica engine that I put together to 230 volts. I had a switch in the circuit so if things got hot I could switch it off. Things got hot very quick. I found learned all the fields are going in the same direction. The left transformer same direction as the field, flux in the motor, as in the transformer to the right.. If I placed a compass which I will next to each this compass or the compasses would show all the field lines going in the same direction.. Another indication no work is being done, no power is or can be produced. Technically this is how this free energy engine is suppose to work, the two, left and right transformers are suppose to produce 230 volts. This voltage is suppose to power up the 3 phase induction motor which converts this voltage into the fields that induce their magical bar. which in turn I guess feeds the transformer coils. IF it is the magic bar that's the problem, I don't know because like yourself I don't have a bar with their formula. It's suppose to be a special alloy. Still there is a possibility you just have to add something things like batteries. 230 volts worth, Converters to convert 230 power. and the bar needs to be perpendicular to the field. or act as if it is. And be able if not create movement somehow stimulate physically stimulate movement. chow.
The frequency comes from the generators as the magnets pass the coils at 50 to 60 cycles per second no matter how many poles/phases. Explain to me how this machine would make Hz. DC might kinda make sense but not AC as there is nothing to alternate the current. It doesn't make sense. Has anyone seen this work in real life? The answer is no.
Я бы хотел бы с тобой пообщаться по поводу твоих изобретений возможно ли это
roxieturk@gmail.com
Sicret is in metal that is superconductor S2 in room temperature
And it has to work at 30 million gigawatts yeah I get it now.
Witam, mój angielski jest słaby i nie wszystko rozumię, ale interesuje mnie ten projekt i na coś wpadłem. W środku tego czpienia jest rtęć, bo przy pierwszych komputerach podobnie stosowali ten patent, by ustabilizować przezył.
Zaraż wyślę link, ok.
pl.m.wikipedia.org/wiki/Pami%C4%99%C4%87_rt%C4%99ciowa
Interesuję się historią i naziści dużo rtęci na swoje eksperymenty zużywali. Może to jest ten klucz, tylko teraz trzeba to w odpowiednich proporcjach poskładać na pewno. Pozdrawiam i powodzenia życzę ;)
Go ahead dude！ This whole system is real❤
I think Hz important
Finally somebody with a brain. The frequency comes from the generators at the generating station. This could possibly make DC that's the only type of free energy you would get. The surrounding ether is the ground and the sky if the Earth is a huge capacitor which it is. So how does he run power tools that have a frequency rating? This thing is a capacitor and there's only a start or run capacitor. Start is directional so it's DC. A running capacitor smooth out your signal and sets your speed. In my opinion this machine will never work.
In order to get EMF or electromotive force that's achieved by the magnets passing the coils and moving the electrons. This thing has nothing to move it unless it's the output like the grinder or a light bulb which I don't understand. The Liberty engine number 2 I do understand it makes total sense his generator makes more power than the motor needs to run and he's only using two poles to run is 220 motor. The other two poles are for extra power.
Copy exactly what he did... It does work! don't say it does not work until you replicate what he did
This is frustrating that people do something different, and say it does not work.
без перевода,не понимаю .
Hello, I'm sorry. Try going to Settings and select Subtitles then Auto Translate. I hope that works
Thank you!
Hello have you seen Jeremy Fielding explanation on this topic you can't get this unit to work not now Because it is a scam😊
Hello, I don't believe everything I see online and you shouldn't either but I like to figure things out for myself.
its was camera tricks bro, they are using editing
Xcuse my Terrible Englisch...i also want to build this engine. It wont let rest my mind becauseif it works its so stabil because there are no parts wich rotate make noise and list of Energie...but in my understanding they left a verry important information like the missing link why its not running....i thought long tome nd searched lot of information....in my mind the only way would be to get another phase from the magnetic field to get a constand field....Pherhaps the did a bedini thing with the engine and took this Phase...its just an idea and for me one of the last Thing i can imagine why not work...th-cam.com/video/LkkcAi35CAA/w-d-xo.htmlsi=Qr2jEYcpZqlgtMVA
There one guy xplains the bedini engine wire Thing...sry not know right englisch word.....i hope you will Figuren out how it works...
As usual, you put a lot of thought into trying to achieve something that is probably originally laid up to be a scam. However, I like the fact that you see the layers in the bar. My only regret is that you say. Umm umm umm 138 times. for me, it’s quite annoying. It makes it difficult to listen to your video.
Hello, That may be. I'm trying.
lying cheater