Scott empieza haciendo lo que sea necesario, luego has lo que sea imposible y de repente estaras haciendo lo imposible en realidad !!!!. Saludos desde Argentina, buenos aires. dale para adelante sigo tu canal👍👍👍
If I compare your contraption to all those working liberty engine variants then I can't help to notice the missing power cord, which is normally attached through the bottom of the device, sometimes from the back. So why did you skip the most important part?
Hello, I was taught when I was a young boy that if I couldn't say something nice about something, that I shouldn't say anything at all. I think that was a very good lesson.
Make sure the 3-phase motor that has been converted to a 1-phase motor rotates normally, by finding the correct micro Farad value for the capacitor (7 to 25 uF), to ensure that the motor rotation is not slow and does not make the motor hot. The stator of this motor will produce a rotating magnetic field. This rotating magnetic field will be transferred to the transformer core and will induce the coil to produce an electromotive force (emf). To test it, do not use a closed loop, but use external electricity for the motor and observe the output voltage If the output voltage is considered sufficient or the same as the input voltage for the motor, then use a portable (rotary) power source. If there is no problem, then provide feedback from the output voltage to the motor input. If successful, you will get a quiet & free energy source believe me, because I am a physicist
Hi Scott, i just wondered, is the bar not to thin for creating a charge in the device? If you look to the shaft of an electromotor, you see that its very close to the inner coils of the motor. Maybe you can solve this by placing neodymium magnets on the bar, so that when a charge passes the bar, it is picked up by the inner coils of the motor. Then the charge would be send to the external microwave coils and will be redirected through the motor in the opposite direction. Just a thought... good luck! 👍
Hello, Has anyone ever heard the phrase, "The Science Fiction of Today is the Reality of Tomorrow?" If people didn't dare to dream and then put the REQUIRED effort into achieving those dreams, "WE" would still be in the dark lighting campfires in our backyards and carrying fire torches. Luckily some people have imaginations and wonder if some things are possible.
Your theory is fine, but it’s like trying to make gold out of lead. Even though under certain conditions, it can be done it’s virtually impossible, and always will be until the aliens come down and show us that the magic trick.
@@gkeith4120Before I start this is not related to religion in any way. I believe that we can get such info with our mind. I have done this few times successfully, but with other things, but it might be hard. Close your eyes and ask a question to god and then wait for an answer. Sometimes the answer will come in few days or weeks. It can be hard to get an answer immediately because you need to understand which thoughts and visions aren't yours and then write them down. With some questions you won't get answer because maybe you are not supposed to know because this info might change your path and lead you in the wrong direction.
I would just get it to work with a 3 phase 230v and once you have it working as the Liberty Engine inventor does. Then you can work on converting the 3 phase 230v to 2 phase 120/240v.
Aluminum and magnetism is wierd, as copper, and I think that silver in the bar, is changing the way aluminum reacts to magnetism. I plan to try with a aluminum/silver bar from Hornbach.
De nada,lo q pueda aportar, contá conmigo,la idea q lo hagas funcionar y nosotros podamos replicar tu ensayo, quería agregar,q estaría bueno q tomes la resistencia de cada bobina e igualar la circulación de corrientes
Hola no hablo inglés,pero estuve viendo tus experiencias ,por ahí lo intentaste,pero yo me fijaría la corriente q circula,xq cuando entendiste las dos bobinas y lo enchufaste a la red anduvo
Hello, Do you have a suggestions as to what motor I should use? I am aware that the video shows a Three Phase asynchronous motor with 240V transformers and coils. They don't make a Three Phase, asynchronous, 120V motor that I am aware of. I've thought about using the 240V stator and its coils of a Three Phase motor with 120V transformer and coils but I don't think that would work. Do you have any specific suggestions? Thank you.
I'm not the best engineer but I have thought hard with my little knowledge. Let me not be a source of discouragement and stop here. If I had the resources, I would have tried my own
I am leaning way on the side that this Liberty Engine is a pure click-bait hoax. Was hoping Scott could prove or disprove it. But Scott, I think that bar MUST be some type of aluminum/silver alloy if it were to replicate what these Spaniards said they built. I do not think you have the correct bar content to get to what they said is necessary.
Hello Bob, It's hard to know for sure. Too many conflicting stories about the formula that don't make sense. If I knew the composition for sure and that it was truly the secret, then I would pursue that direction. If that were so, there would probably be other factors regarding tuning it, I don't know. I could be wrong. Thank you.
@@ScottFogarty-iv9wt : The motor stator material or transformer core material is multi-layered iron (not stainless, not aluminum). I think the core rod material must be the same, because its function is to capture the rotating magnetic field from the stator transferred to the transformer core
Scott empieza haciendo lo que sea necesario, luego has lo que sea imposible y de repente estaras haciendo lo imposible en realidad !!!!. Saludos desde Argentina, buenos aires. dale para adelante sigo tu canal👍👍👍
If I compare your contraption to all those working liberty engine variants then I can't help to notice the missing power cord, which is normally attached through the bottom of the device, sometimes from the back. So why did you skip the most important part?
Hello, I was taught when I was a young boy that if I couldn't say something nice about something, that I shouldn't say anything at all.
I think that was a very good lesson.
@@ScottFogarty-iv9wt
Why the change of mind?
Make sure the 3-phase motor that has been converted to a 1-phase motor rotates normally, by finding the correct micro Farad value for the capacitor (7 to 25 uF), to ensure that the motor rotation is not slow and does not make the motor hot. The stator of this motor will produce a rotating magnetic field. This rotating magnetic field will be transferred to the transformer core and will induce the coil to produce an electromotive force (emf).
To test it, do not use a closed loop, but use external electricity for the motor and observe the output voltage
If the output voltage is considered sufficient or the same as the input voltage for the motor, then use a portable (rotary) power source.
If there is no problem, then provide feedback from the output voltage to the motor input.
If successful, you will get a quiet & free energy source
believe me, because I am a physicist
I think it is the bar, but you can also try without the capacitor, I don't think they had that in the video.
Thank you
Hey try applying the power from synchronous motor to the copper coil and see if any changes
BRAK FINAŁU UZYSKANIA ENERGI . BRAK TŁUMACZENIA NA JĘZYK POLSKI . OK! POZDRAWIAM
Hello, I believe you can change the auto translate in the settings. Thank you
Hi Scott, i just wondered, is the bar not to thin for creating a charge in the device? If you look to the shaft of an electromotor, you see that its very close to the inner coils of the motor. Maybe you can solve this by placing neodymium magnets on the bar, so that when a charge passes the bar, it is picked up by the inner coils of the motor. Then the charge would be send to the external microwave coils and will be redirected through the motor in the opposite direction. Just a thought... good luck! 👍
Try whit a light bulb in the socket and when you spin it schould produce current.
Olá Scott , sou seu seguidor e admirador seu , continue com seus esforços eu sei que dará certo , nao desista ,um abraço .
Thank you. I appreciate it 😍
OUT OF THE WOODWORK THEY COME!!
Hello, Has anyone ever heard the phrase, "The Science Fiction of Today is the Reality of Tomorrow?" If people didn't dare to dream and then put the REQUIRED effort into achieving those dreams, "WE" would still be in the dark lighting campfires in our backyards and carrying fire torches. Luckily some people have imaginations and wonder if some things are possible.
Good remark! Got to dream it before you can build it!
Yes exactly
Your theory is fine, but it’s like trying to make gold out of lead. Even though under certain conditions, it can be done it’s virtually impossible, and always will be until the aliens come down and show us that the magic trick.
@@gkeith4120Before I start this is not related to religion in any way.
I believe that we can get such info with our mind. I have done this few times successfully, but with other things, but it might be hard. Close your eyes and ask a question to god and then wait for an answer. Sometimes the answer will come in few days or weeks. It can be hard to get an answer immediately because you need to understand which thoughts and visions aren't yours and then write them down. With some questions you won't get answer because maybe you are not supposed to know because this info might change your path and lead you in the wrong direction.
Tell that to all of the inventors out there. They started with an idea. If you believe things are impossible, then they are. @@gkeith4120
I would just get it to work with a 3 phase 230v and once you have it working as the Liberty Engine inventor does. Then you can work on converting the 3 phase 230v to 2 phase 120/240v.
There is no capacitor installed on the liberty engine version 3
Aluminum and magnetism is wierd, as copper, and I think that silver in the bar, is changing the way aluminum reacts to magnetism. I plan to try with a aluminum/silver bar from Hornbach.
Again, If you find it, let me know.
This device lacks a hidden power supply from the distribution system. Then nothing will prevent it from spinning.
De nada,lo q pueda aportar, contá conmigo,la idea q lo hagas funcionar y nosotros podamos replicar tu ensayo, quería agregar,q estaría bueno q tomes la resistencia de cada bobina e igualar la circulación de corrientes
a perfect balance between the sides of the magnetic field is needed and then self-induction can occur
всё заработает тогда когда будет правельный сплав планки,а полный состав планки мы незнаем.в этом вся проблема.
Hello. Yes. How long must we wait for what is needed. I'm not waiting.
Hola no hablo inglés,pero estuve viendo tus experiencias ,por ahí lo intentaste,pero yo me fijaría la corriente q circula,xq cuando entendiste las dos bobinas y lo enchufaste a la red anduvo
Thank you for your observation
Busca la aleación ZINAG, (Aluminio, plata y zinc)
Hello, I'm sorry I didn't see your comments.Thank you.
Welcome to scams-ville, population: You.
Sssss beef, ITS DAMN FLUBBER GREAT SCOTTS
And you must make close servwet
You don't need capacitor
Just proves the original video was a hoax and a scam.
لا اريد ان احبطك لاكن ليبرتي كذاب لا تصدقوه فهو يستعمل الفتو شوب بالفيديو ليوهم الناس
😢you had a rong motor
Hello, Do you have a suggestions as to what motor I should use? I am aware that the video shows a Three Phase asynchronous motor with 240V transformers and coils. They don't make a Three Phase, asynchronous, 120V motor that I am aware of. I've thought about using the 240V stator and its coils of a Three Phase motor with 120V transformer and coils but I don't think that would work. Do you have any specific suggestions? Thank you.
I'm not the best engineer but I have thought hard with my little knowledge. Let me not be a source of discouragement and stop here. If I had the resources, I would have tried my own
Hi George, I'm not finished and I hope others aren't either. Thank you.
the guy apparently did it with the same machine>>>th-cam.com/video/CSx5kcwnXwY/w-d-xo.html
I am leaning way on the side that this Liberty Engine is a pure click-bait hoax. Was hoping Scott could prove or disprove it.
But Scott, I think that bar MUST be some type of aluminum/silver alloy if it were to replicate what these Spaniards said they built. I do not think you have the correct bar content to get to what they said is necessary.
Hello Bob, It's hard to know for sure. Too many conflicting stories about the formula that don't make sense. If I knew the composition for sure and that it was truly the secret, then I would pursue that direction.
If that were so, there would probably be other factors regarding tuning it, I don't know. I could be wrong. Thank you.
@@ScottFogarty-iv9wt : The motor stator material or transformer core material is multi-layered iron (not stainless, not aluminum). I think the core rod material must be the same, because its function is to capture the rotating magnetic field from the stator transferred to the transformer core
I try it but it doesn't work please Ur WhatsApp number please